From 8cbc28c35bfa5dc1ddd684618217b5ec842bdaa7 Mon Sep 17 00:00:00 2001 From: Mattias Andrée Date: Wed, 30 Apr 2025 17:10:03 +0200 Subject: Add instructions for cap holder MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Mattias Andrée --- cap-holder | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 cap-holder (limited to 'cap-holder') diff --git a/cap-holder b/cap-holder new file mode 100644 index 0000000..8d52890 --- /dev/null +++ b/cap-holder @@ -0,0 +1,22 @@ +Cap holder for belt + +Functionally similar to a carabiner. +(You can just as well use a carabiner.) + +Make a leather strip that's about 1,5 cm wide and 25–27 cm long. + +This strip loops around the belts just above two times. +Start just below the top of the backside of the belt and loop it around the belt. + +Use two revits to join the two layers behind the belt. +As an (untested) alternative, you could use push button to allow it to be +move around more or removed without removing your belt. + +Make sure you have enough slack on the front side for the +cap's strip, then add a push button to join the two layers +on the front side. + +The remainder of the strip is tucked away behind the belt. +If you only made the strip 22 cm long, you would have enought +extra after the push button to easly open it without having +to tuck it away behind the belt. -- cgit v1.2.3-70-g09d2