From a7967eab1ab4ace63b5c04a367c205afe3479cc1 Mon Sep 17 00:00:00 2001 From: Mattias Andrée Date: Sat, 19 Dec 2015 01:41:11 +0100 Subject: empty texinfo manual MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Mattias Andrée --- doc/info/sleeping-getty.texinfo | 104 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 doc/info/sleeping-getty.texinfo (limited to 'doc/info/sleeping-getty.texinfo') diff --git a/doc/info/sleeping-getty.texinfo b/doc/info/sleeping-getty.texinfo new file mode 100644 index 0000000..ebb2950 --- /dev/null +++ b/doc/info/sleeping-getty.texinfo @@ -0,0 +1,104 @@ +\input texinfo @c -*-texinfo-*- +@c %**start of header +@documentencoding UTF-8 +@include reusable/macros.texinfo +@copying +@c -------------------------------------------------------------------------------- +Copyright @copyright{} 2015 @w{Mattias Andrée @e{maandree@@member.fsf.org}} + +@quotation +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version@tie{}1.3 or +any later version published by the Free Software Foundation; with the +Invariant Sections being ``Free Software Needs Free Documentation'', the +``GNU General Public License'', the ``GNU Free Documentation License'', +with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the +license is included in the section entitled ``GNU Free Documentation License''. +@end quotation +@c THIS WAS LAST CHANGED 2015-DECEMBER-19 UTC +@c When updated, please remember to update hardcopy-copying.texinfo too. +@c -------------------------------------------------------------------------------- +@end copying + +@setfilename sleeping-getty.info +@settitle sleeping-getty +@documentlanguage en_GB +@include titlepage-data.texinfo + +@c You can change the title of the document in dir by compiling with +@c TEXINFO_FLAGS='--texinfo="@set CATEGORY your_new_category"' +@ifclear CATEGORY +@set CATEGORY System +@end ifclear + +@dircategory @value{CATEGORY} +@direntry +* sleeping-getty: (sleeping-getty). @value{subtitle} +@end direntry + +@documentdescription +User manual for sleeping-getty. +A process image that delays the start of +a getty until it is required.. +@end documentdescription +@c %**end of header + + +@iftex +@c @set USLETTER +@c @set AFOURPAPER +@c @set AFIVEPAPER +@c @set SMALLBOOK + +@c @set HARDCOPY +@c @set CROPMARKS +@c @set SKIPCHAPTERNEWPAGE +@c @set SKIPFONTTEXTSIZE +@end iftex +@c @set LOGO +@c @set DOUBLEHEADINGS +@c @set SINGLEHEADINGS +@c @set AMERICANSPACING +@c @set NOFINALOUT + +@ignore + + CROPMARKS has no effect unless HARDCOPY is set. CROPMARKS + and AFIVEPAPER (or actually @cropmarks and @afivepaper) does + not play well together. + + You can configure how TeX output files should look by uncommenting + @set commands above. Do not uncomment more than one of the paper + sizes (USLETTER, AFOURPAPER, AFIVEPAPER and SMALLBOOK); if none is + uncomment AFOURPAPER will be set unless HARDCOPY is set, in which + case SMALLBOOK will be set. However, if you do not want to modify + this source file, you can run `make` with for example + `TEXINFO_FLAGS='--texinfo="@set HARDCOPY"'`. + + Finally, you can include, on the front page, the version of sleeping-getty + that the manual is up to date with, by setting the value of VERSION + to the version of sleeping-getty, as well as date of the last update by + setting DATE, and edition by setting EDITION. This is intended for + printed manuals. The date is recommended to not be more accurate, + or less accurate, than to the month. The edition should be formatted + as, for example, ``1@sup{st}''. + +@end ignore + +@comment You can see these too with TEXINFO_FLAGS. +@c @paragraphindent asis +@c @firstparagraphindent none +@c @exampleindent asis +@c @kbdinputstyle distinct + +@include reusable/paper.texinfo + + +@include hardcopy-copying.texinfo +@include reusable/titlepage.texinfo +@setheadings{} + +@include content.texinfo + +@bye + -- cgit v1.2.3-70-g09d2