Rewrite everything

Signed-off-by: Mattias Andrée <maandree@kth.se>

1 files changed, 0 insertions, 181 deletions

diff --git a/README b/README
deleted file mode 100644
index be663a0..0000000
--- a/README
+++ /dev/null
@@ -1,181 +0,0 @@
-NAME
-	radharc - Reduce eye strain and improve sleep.
-
-PRONUNCIATION
-	ɹˈaɪɐrk (depending on dialect)
-
-SYNOPSIS
-	radharc [OPTIONS]...
-
-	The -l option is mandatory, unless single value -t is used.
-
-OPTIONS
-	-l LATITUDE:LONGITUDE
-		Tell radharc where you are. This is mandatory.
-		The values are measured in degrees and in the
-		GPS (you probably do not have too care about that,
-		the differences between the systems should not
-		be significant another), and must be in decimal.
-
-		Reminder for Americans (particularly US Americans),
-		you are an the western hemisphere, not the eastern,
-		thus your longtiude is negative. If you experience
-		weird colour temperatures, 100 % of the times it is
-		because you forgot the minus sign. But no need to
-		feel stupid, it is a really common mistake.
-
-		No complicated stuff please, only latitudes within
-		±90° and longitudes within ±180°. No unit thought.
-
-	-t DAY:NIGHT
-		Select colour temperature to use during full daytime
-		and full night. This should be a integer. Do not
-		include the unit (the 'K'). The temperatures must
-		be at least 1000 K.
-
-	-t TEMPERATURE
-		Select temperature to use. The program will exit
-		when it is done setting the temperature. The
-		natural colour temperature is 6500 K ('-t 6500').
-		The temperature must be at least 1000 K.
-
-	-t +DELTA
-		Increase the colour temperature by DELTA kelvin.
-
-	-t -DELTA
-		Decrease the colour temperature by DELTA kelvin.
-
-	-T TEMPERATURE
-		Temperature that shall be used when the program
-		is disabled (via SIGUSR1).
-
-	-p	Print the current status.
-
-	-n	Set the temperature immediately, do not transition.
-
-	-N	Do not transition when exiting, disabling, or
-		reenabling.
-
-	-o	Set the colour, and exit.
-
-	-x	Ignore the current calibrations on the monitors.
-
-	-s SECONDS
-		The start and exit transitions shall take SECONDS
-		seconds. This may be a floating point number, with
-		an explicit unit.
-
-	-S KELVINS
-		The transitions speed, in kelvin per second.
-		This most be a positive integer.
-
-	-i
-		Apply negative image filter. Radharc will detect
-		which monitors have this one when it starts.
-
-	-h PATHNAME
-		Use a hook script for events.
-
-	-b
-		Broadcast events with bus.
-
-	-d SERVER=DISPLAY
-		Use the display server whose identifier is
-		DISPLAY and whose identifier is stored in the
-		environment variable SERVER, for example
-		-d DISPLAY=:0 for the X display :0.
-
-	-d SYSTEM
-		Use a subsystem which does not have identifiers.
-		For example 'drm' for the Direct Rendering Manager.
-		You can also select 'none', this is useful if you
-		don't want any adjustments, but want events to be
-		broadcasted.
-
-	-e EDID
-		Select monitor to use by its EDID.
-
-	-m NUM
-		Select monitor to use by its global index.
-
-	-m SCREEN:NUM
-		Select monitor to use by its index without
-		a screen or graphic card. The later is for when
-		not inside a graphics environment.
-
-	All options also have a '+' variant, for example '+n'.
-	These undo the affect of previous '-' variant.
-	'+d', '+e', and '+m' all undo the affect of all previous
-	'-d', '-e', and '-m' options (not respectively).
-	Additionally, with the exception of '-d', '-e', '-m',
-	subsequent options override the previous of the the option.
-
-SIGNALS
-	SIGHUP
-		Perform an online update to a newer version.
-
-	SIGUSR1
-		Enable or disable radharc.
-
-	SIGUSR2
-		Toggle negative image filter. Enable on all
-		monitors if it is enable on some but not all.
-
-	SIGRTMIN+N
-		Toggle negative image on monitor N, if monitors
-		have been selected manually, it will be in the
-		order they where selected.
-
-ENVIRONMENT
-	XDG_RUNTIME_DIR
-		This environment variable names the directory in which
-		the state file is stored. If unset or empty, /run is
-		used.
-
-	RADHARC_STATE
-		The pathname to the state file, will be determined
-		automatically if not set. If not set, you may only
-		have one instance running per display server instance.
-
-RATIONALE
-	Your location is determined use GeoClue because it clunky,
-	unreliable, inaccurate and requires an Internet connection
-	or GPS device, it is way to common that neither is available.
-	And I do not want to handle all bug reports for this. Besides,
-	you can use an external program.
-
-	Your timezone is used to determine your location approximately
-	when not specified, You can be a really poor approximation.
-	It is too much work supporting summer time, especially when
-	summer time is not necessarily +1 hour, additionally you can
-	have scheme where it is first normal time, then summer time,
-	then double summer time, then back to summer time, and the back
-	normal time; complicated stuff, additionally, the Russian
-	Federation is in permanent summer time. And have you heard about
-	the People's Republic of China (not to be confused with the
-	less known Republic of China,) they have one timezone, which is
-	far from in the middle of the country. You can use an external
-	program. To keep it simple, we are not even using your timezone
-	to santity check your specified location.
-
-NOTES
-	I suggest using a local script named radharc that sets all
-	options for you.
-
-KNOWN ISSUES
-	In X.org, the gamma ramps do not apply to hardware cursors,
-	because the developers thinks it is the graphics drivers
-	that shall fix this, and they are not accepting patches for
-	this. You can use xorg-server-hwcursor-gamma, however, that
-	patched version does not apply apply the gamma ramps until
-	the cursor changes image. You can also use sortware cursors
-	if this really bothers you.
-
-	Wayland does not support this because it [Wayland] sucks.
-
-	Haiku does not support this yet.
-
-SEE ALSO
-	redshift(1), blueshift(1), redshift-adjust(1), nightshift(1),
-	locateme(1)
-