diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/info/mds.texinfo | 1061 |
1 files changed, 505 insertions, 556 deletions
diff --git a/doc/info/mds.texinfo b/doc/info/mds.texinfo index bf26a32..caf880f 100644 --- a/doc/info/mds.texinfo +++ b/doc/info/mds.texinfo @@ -264,65 +264,73 @@ libraries and concepts. @node Overview @chapter Overview -@command{mds}@footnote{mds stands for micro-display server.} -is a display server protocol and an implementation of said -protocol. What makes @command{mds} stand out is its core -design choice: it is desigend just like a microkernel. -Rather than one, possibly modular, process --- a monolithic -process --- @code{mds} is comprised of many small servers, -each exchangable and responsible for one thing. +@command{mds}@footnote{mds stands for micro-display +server.} is a display server protocol and an +implementation of said protocol. What makes +@command{mds} stand out is its core design choice: +it is desigend just like a microkernel. Rather than +one, possibly modular, process --- a monolithic +process --- @code{mds} is comprised of many small +servers, each exchangable and responsible for one +thing. @cpindex Goals of @command{mds} -@command{mds}'s goal is neither security, performance nor -a perfect graphical experience. @command{mds} is all -about flexibility and freedom 0@footnote{The freedom to run -the program as you wish, for any purpose.}. - -The reason for having a display server architectured as a -microkernel is so that components can be added, removed, -updated and replaced online. Additionally, the message passing -between the servers makes it easy to design a system that -lets you make clients that can listen on messages between -the servers and perhaps modify them. This enables you to -do so much more with your display server. Moreover, if -a single part of the system crashes it does not bring down -the whole system, and the crashed server can be respawned -with minor side effects. @command{mds} is architectured -in three layers: a microkernel, a master server and a -collection of servers. And clients are actually located -on the same layer as the servers, because there is no -actual difference, the only thing that separates a server -from a client is for what purpose you run it. @command{mds}'s -kernel is a minimal program that do initialisation of the -display, such as giving it an index and create runtime -files and directories for servers and other programs -to use. Then the kernel creates a domain socket for the -master server and spawns the master server and respawns -it if it crashes. Because of this, if the master server -crashes it will not lose its socket when it is respawned. -The master server then, on its initial spawn, starts -the all servers and other programs that the user have -choosen and then starts accepting connections to it and -coordinates messages between servers and clients. Further, -separating all components into separate processes enables -us to only give the servers the privileges they actually -need, rather than having one program with root privileges -that takes care of everything even things that do not do -require any privileges. - -All @command{mds}'s servers, that is all running parts of -@command{mds} except the kernel, are designed so that they -can re-execute themself so that they can be updated online -without any side effects. Servers serialises their state, -saves it to RAM (in a directory created by the kernel), -re-execute themself and loads their serialised state. The -kernel cannot do this because when it has spawned the -master server it has no reason to re-execute, its only mission -is to respawn the master server it if would happen to crash. -It would technically be possible to enable the kernel to -re-execute but it is not worth it as there is no reason to -re-execute, and doing so puts the display server at risk -of crashing. +@command{mds}'s goal is neither security, performance +nor a perfect graphical experience. @command{mds} is +all about flexibility and freedom 0@footnote{The +freedom to run the program as you wish, for any +purpose.}. + +The reason for having a display server architectured +as a microkernel is so that components can be added, +removed, updated and replaced online. Additionally, +the message passing between the servers makes it easy +to design a system that lets you make clients that +can listen on messages between the servers and +perhaps modify them. This enables you to do so much +more with your display server. Moreover, if a single +part of the system crashes it does not bring down the +whole system, and the crashed server can be respawned +with minor side effects. @command{mds} is +architectured in three layers: a microkernel, a +master server and a collection of servers. And +clients are actually located on the same layer as the +servers, because there is no actual difference, the +only thing that separates a server from a client is +for what purpose you run it. @command{mds}'s kernel +is a minimal program that do initialisation of the +display, such as giving it an index and create +runtime files and directories for servers and other +programs to use. Then the kernel creates a domain +socket for the master server and spawns the master +server and respawns it if it crashes. Because of +this, if the master server crashes it will not lose +its socket when it is respawned. The master server +then, on its initial spawn, starts the all servers +and other programs that the user have choosen and +then starts accepting connections to it and +coordinates messages between servers and clients. +Further, separating all components into separate +processes enables us to only give the servers the +privileges they actually need, rather than having +one program with root privileges that takes care of +everything even things that do not do require any +privileges. + +All @command{mds}'s servers, that is all running +parts of @command{mds} except the kernel, are +designed so that they can re-execute themself so that +they can be updated online without any side effects. +Servers serialises their state, saves it to RAM (in a +directory created by the kernel), re-execute themself +and loads their serialised state. The kernel cannot +do this because when it has spawned the master server +it has no reason to re-execute, its only mission is +to respawn the master server it if would happen to +crash. It would technically be possible to enable the +kernel to re-execute but it is not worth it as there +is no reason to re-execute, and doing so puts the +display server at risk of crashing. @@ -349,18 +357,18 @@ of crashing. The @command{mds} display server in architectured in three layers. The first layer is called the kernel. The kernel is responsible for acquiring a display -server index@footnote{As with any display server, -the system can have multiple instances of -@command{mds} running at the same time.}, set up -environment variables to indicate which display -server and display server instance is being used, -create a domain socket for the display server and -start the master server and restart it if it crashes, -and then clean up the system when the display server -closes. The kernel only responsible for creating -the domain socket for communication with the display -server, it is not responsible for using it, that -mission falls to the master server. +server index@footnote{As with any display server, the +system can have multiple instances of @command{mds} +running at the same time.}, set up environment +variables to indicate which display server and +display server instance is being used, create a +domain socket for the display server and start the +master server and restart it if it crashes, and then +clean up the system when the display server closes. +The kernel only responsible for creating the domain +socket for communication with the display server, it +is not responsible for using it, that mission falls +to the master server. @cpindex Master server @cpindex Message passing, coordination @@ -372,22 +380,22 @@ server has two responsibilities: coordinating message passing between other servers and clients @footnote{In @command{mds} there is no functional distinction between servers and clients, the -distinction is purely semantic.} and starting -other servers. +distinction is purely semantic.} and starting other +servers. @cpindex Starting of servers @cpindex Servers, starting @pgindex @file{mdsinitrc} The third layer is the other servers and clients. -protocolwise there is no specification on how -they are started. But in the reference -implementation of the master server, this is -done by starting a shell script with the -pathname @file{$@{XDG_CONFIG_HOME@}/mdsinitrc} -and the user is responsible for providing the -logic in that shell script.@footnote{Moonstruck -users are allowed to implement this in C -or any other language of their choosing.} +protocolwise there is no specification on how they +are started. But in the reference implementation of +the master server, this is done by starting a shell +script with the pathname +@file{$@{XDG_CONFIG_HOME@}/mdsinitrc} and the user +is responsible for providing the logic in that shell +script.@footnote{Moonstruck users are allowed to +implement this in C or any other language of their +choosing.} @c Which is better: cray-cray users, lunatic users, @c moonstruck users, insane users, ballers, madmen, @c loony tunes, systemd-lovers? @@ -404,21 +412,18 @@ of the display server. @cpindex Interprocess communication, mechanism @cpindex Master server @pgindex @command{mds-server} -Intrinsic to @command{mds} is a powerful -interprocess communication mechanism. Servers -and clients connect to the display server by -connecting to a domain socket served by the -master server. A server or client that has -connected to the display server can do three -things: +Intrinsic to @command{mds} is a powerful interprocess +communication mechanism. Servers and clients connect +to the display server by connecting to a domain +socket served by the master server. A server or +client that has connected to the display server can +do three things: @itemize @item Request assignment of a unique ID@. - @item Multicast a message. - @item Join or leave a multicast group. @end itemize @@ -430,15 +435,14 @@ Join or leave a multicast group. @cpindex Disconnection @cpindex Master server @pgindex @command{mds-server} -Upon assignment of an ID the master server -will automatically place the client in a -multicast group for that specific client. -This automatically multicast group assignment -is done by the master server simply so you -as a debugger do not forget to do so. When -a client is disconnected it will send out a -message to a specific multicast group that -the client, refered to by it's ID, have closed. +Upon assignment of an ID the master server will +automatically place the client in a multicast group +for that specific client. This automatically +multicast group assignment is done by the master +server simply so you as a debugger do not forget to +do so. When a client is disconnected it will send +out a message to a specific multicast group that the +client, refered to by it's ID, have closed. @cpindex Message passing, message structure @cpindex Communication, message structure @@ -446,16 +450,16 @@ the client, refered to by it's ID, have closed. @cpindex Message structure, message passing @cpindex Master server @pgindex @command{mds-server} -A message in the @command{mds} protocol is -comprised of two parts: headers and a payload. -When a client joins a multicast group it is -actually saying that it is interested in -receiving broadcasts containing a specific header -or a specific header--value pair, or that it -is interesting in all messages@footnote{This -could be used for logging, possibly spying and -networking.}. Thus a message is automatically -multicasted to groups indicated by its headers. +A message in the @command{mds} protocol is comprised +of two parts: headers and a payload. When a client +joins a multicast group it is actually saying that +it is interested in receiving broadcasts containing +a specific header or a specific header--value pair, +or that it is interesting in all messages +@footnote{This could be used for logging, possibly +spying and networking.}. Thus a message is +automatically multicasted to groups indicated by its +headers. @cpindex Interceptions, message passing @cpindex Message passing, message modification @@ -465,47 +469,41 @@ multicasted to groups indicated by its headers. @cpindex Master server @pgindex @command{mds-server} @cpindex Multicast groups -The multicast groups and receiving of message -is called interceptions. The interesting -property of interceptions is that they may -be modifying. When a server registers for -message interception it can say that it wants -to be able to modify messages. If this is done -and the server receives a message for which it -has said it want to be able to modify it, -the master server will wait for that server -to respond before it send the message to -the next server in the interception list. -The server can choose to do three things -with a message that it has opted in for -modification of: leave the message as-is, -modify the message, or consume the message. -A message consumption is done by modify -the message to make it empty. A consumed -message will not be send to any further -clients or servers in the interception list. +The multicast groups and receiving of message is +called interceptions. The interesting property of +interceptions is that they may be modifying. When a +server registers for message interception it can say +that it wants to be able to modify messages. If this +is done and the server receives a message for which +it has said it want to be able to modify it, the +master server will wait for that server to respond +before it send the message to the next server in the +interception list. The server can choose to do three +things with a message that it has opted in for +modification of: leave the message as-is, modify the +message, or consume the message. A message +consumption is done by modify the message to make it +empty. A consumed message will not be send to any +further clients or servers in the interception list. @cpindex Interception priority, message passing @cpindex Priority, interception, message passing @cpindex Message consumption, message passing @cpindex Consumption, interception, message passing -To make this mechanism sensible, a server or -client can set a priority when it registers -for interception (does not need to be -modifying.) When a message is broadcasted it -will be received by all servers in the -interception except the original sender, -unless it gets consumes. The order in which -the master server sends the message to the -recipients is determined by priority the -servers registed with. The message first sent -to the recipients with highest priority and -last to the recipients with lowest priority, -and ordered by the priority between those -priorities. Of two or more servers have the -same priority the order in which they will -receive the message, of those recipients, -is arbitrary. +To make this mechanism sensible, a server or client +can set a priority when it registers for interception +(does not need to be modifying.) When a message is +broadcasted it will be received by all servers in the +interception except the original sender, unless it +gets consumes. The order in which the master server +sends the message to the recipients is determined by +priority the servers registed with. The message first +sent to the recipients with highest priority and last +to the recipients with lowest priority, and ordered +by the priority between those priorities. Of two or +more servers have the same priority the order in +which they will receive the message, of those +recipients, is arbitrary. @pgindex @command{mds-vt} @cpindex Virtual terminal, switching @@ -515,33 +513,29 @@ is arbitrary. @cpindex Communication, dual-connection @cpindex Interprocess communication, dual-connection @cpindex Reflexive connection, message passing -An interesting property of this mechanism -is demonstrated in the @command{mds-vt} -server. Unlike most servers @command{mds-vt} -maintains two concurrent connections to -the display. Once @command{mds-vt} receives -a signal from the OS kernel requesting to -switch virtual terminal, @command{mds-vt} -will from one of its connections send -out a message and wait for it to be -received in its other connection and the -let the OS kernel switch virtual terminal. -The secondary connection to the display -has registered interception with lower -priority of the message than the primary -connection broadcasts. This message will -be received by other servers that will -let the message continue to the next -server in the interception list once that -server is ready for the OS kernel to switch -virtual terminal. All of these servers have -registered modifying interception of the -message but none of them will actually modify -or consume the message; it is only used a -mechanism for letting @command{mds-vt} know -when all servers are ready for the switch -without having to know how many they are -and wait for a reply from all of them. +An interesting property of this mechanism is +demonstrated in the @command{mds-vt} server. Unlike +most servers @command{mds-vt} maintains two +concurrent connections to the display. Once +@command{mds-vt} receives a signal from the OS +kernel requesting to switch virtual terminal, +@command{mds-vt} will from one of its connections +send out a message and wait for it to be received +in its other connection and the let the OS kernel +switch virtual terminal. The secondary connection to +the display has registered interception with lower +priority of the message than the primary connection +broadcasts. This message will be received by other +servers that will let the message continue to the +next server in the interception list once that server +is ready for the OS kernel to switch virtual +terminal. All of these servers have registered +modifying interception of the message but none of +them will actually modify or consume the message; it +is only used a mechanism for letting @command{mds-vt} +know when all servers are ready for the switch +without having to know how many they are and wait +for a reply from all of them. @@ -560,18 +554,18 @@ there are some guildlines you should follow. @cpindex Client-side decoration @cpindex Server-side decoration @cpindex Decoration, guildlines -@b{Do not create client-side decoration}. Some -users do not want decorations or wants minimal -decorations. Windows should look similar, server-side -decoration helps ensure this. Your client-side -decorations may not meet the requirements the users -have. For example, your client-side decoration may -only support minimise, maximise and close, whilst the -user may also want, as provided by her decoration -server, stick, shade and always on top. And it should -be sufficient to configure your decorations once -rather once for every toolkit. Additionally, because -of oversight from developers, client-side decoration +@b{Do not create client-side decoration}. Some users +do not want decorations or wants minimal decorations. +Windows should look similar, server-side decoration +helps ensure this. Your client-side decorations may +not meet the requirements the users have. For +example, your client-side decoration may only support +minimise, maximise and close, whilst the user may +also want, as provided by her decoration server, +stick, shade and always on top. And it should be +sufficient to configure your decorations once rather +once for every toolkit. Additionally, because of +oversight from developers, client-side decoration tends to work poorly with tiling window managers. @item @@ -582,12 +576,11 @@ tends to work poorly with tiling window managers. @b{Do not remember size and position}. Some users do not want their programs to remember their size and position. There is also a risk that your -mechanism for implementing this does not account -for the possibility that outputs may have been -removed, resized or relocated. -@command{mds-posmem} can be used if the user wants -programs to start where they were closed the last -time they were closed. +mechanism for implementing this does not account for +the possibility that outputs may have been removed, +resized or relocated. @command{mds-posmem} can be +used if the user wants programs to start where they +were closed the last time they were closed. @end itemize @@ -645,16 +638,15 @@ servers collectively. @cpindex Version update @sgindex @code{SIGUSR1} @sgindex @code{SIGUPDATE} -@command{mds} servers can re-execute into an -updated version of their binary. This can be -used to update display server online after -a new version has been installed. To do this -send the signal @code{SIGUSR1} to the server -you want update. If a server does not support -online updating it will ignore this signal. +@command{mds} servers can re-execute into an updated +version of their binary. This can be used to update +display server online after a new version has been +installed. To do this send the signal @code{SIGUSR1} +to the server you want update. If a server does not +support online updating it will ignore this signal. If the operating system defines a signal named -@code{SIGUPDATE}, this signal is used -instead of @code{SIGUSR1}. +@code{SIGUPDATE}, this signal is used instead of +@code{SIGUSR1}. @cpindex Signals @cpindex Memory release, automatic @@ -664,11 +656,10 @@ instead of @code{SIGUSR1}. @cpindex Releasing memory @sgindex @code{SIGDANGER} @sgindex @code{SIGRTMIN + 1} -If you need servers to free up allocated -memory that they do not use, send the signal -@code{SIGDANGER}, or if not defined -@code{SIGRTMIN + 1}. Unimportant servers -may choose to die on @code{SIGDANGER}@. +If you need servers to free up allocated memory that +they do not use, send the signal @code{SIGDANGER}, or +if not defined @code{SIGRTMIN + 1}. Unimportant +servers may choose to die on @code{SIGDANGER}@. @sgindex @code{SIGINFO} @sgindex @code{SIGRTMIN + 2} @@ -676,29 +667,27 @@ may choose to die on @code{SIGDANGER}@. @cpindex Statistics dump Server may also choose to support the signal @code{SIGINFO}, or if not defined -@code{SIGRTMIN + 2}. It is not expected -that server do support this signal, but -thay must not die when received. @code{SIGINFO} -is send by a user to the server, if she wants -the server to dump information about the -server's state or statistics to the TTY@. +@code{SIGRTMIN + 2}. It is not expected that server +do support this signal, but thay must not die when +received. @code{SIGINFO} is send by a user to the +server, if she wants the server to dump information +about the server's state or statistics to the TTY@. @sgindex @code{SIGRTMIN} @cpindex No-operation signal -All servers configured to be interrupted -when the signal @code{SIGRTMIN} is received. -No further action is taked. This may be used -by the user to test that the program supports -being interrupted. It can also be used by -the server to interrupt itself from another +All servers configured to be interrupted when the +signal @code{SIGRTMIN} is received. No further action +is taked. This may be used by the user to test that +the program supports being interrupted. It can also +be used by the server to interrupt itself from another thread. @pgindex @command{valgrind} @sgindex @code{SIGRTMAX} -@command{valgrind} uses @code{SIGRTMAX} for -its own internal stuff. Therefore servers must -not use @code{SIGRTMAX} as it is hence -unavailable when running under @command{valgrind}. +@command{valgrind} uses @code{SIGRTMAX} for its own +internal stuff. Therefore servers must not use +@code{SIGRTMAX} as it is hence unavailable when +running under @command{valgrind}. @@ -710,23 +699,23 @@ unavailable when running under @command{valgrind}. @cpindex Kernel @cpindex Display server kernel @pgindex @command{mds} -The @command{mds} kernel creates two directories -for the @command{mds} servers to use: one for -runtime data and one for temporary data. -These directories are named by -@code{MDS_RUNTIME_ROOT_DIRECTORY} and +The @command{mds} kernel creates two directories for +the @command{mds} servers to use: one for runtime +data and one for temporary data. These directories +are named by @code{MDS_RUNTIME_ROOT_DIRECTORY} and @code{MDS_STORAGE_ROOT_DIRECTORY}, respectively, by the header file @file{<libmdsserver/config.h>}. If the systems runtime data directory is @file{/run} and transient temporary data directory is @file{/tmp}, -and the package name of @command{mds} is @command{mds}, -these directories will be @file{/run/mds} and +and the package name of @command{mds} is +@command{mds}, these directories will be +@file{/run/mds} and @file{/tmp/.@{system-directory@}.mds}, respectively. In @file{/tmp/.@{system-directory@}.mds} the kernel -will create a directory for the display server instance -named @file{.data} prefixed by the display server index. -For example if the display server index is zero, -temporary data may be stored in +will create a directory for the display server +instance named @file{.data} prefixed by the display +server index. For example if the display server index +is zero, temporary data may be stored in @file{/tmp/.@{system-directory@}.mds/0.data} @cpindex Re-executing servers @@ -742,24 +731,22 @@ the POSIX shared memory unit named functions for the data type @code{intmax_t}.} is replaced with the process ID of the server. This file will be bound to the pathname -@file{/dev/shm/.proc-pid-%ji} if POSIX shared -memory is stored in @file{/dev/shm} by the -operating system. +@file{/dev/shm/.proc-pid-%ji} if POSIX shared memory +is stored in @file{/dev/shm} by the operating system. -In @code{MDS_RUNTIME_ROOT_DIRECTORY} the kernel -will create two files. @file{.pid} and @file{.socket}, +In @code{MDS_RUNTIME_ROOT_DIRECTORY} the kernel will +create two files. @file{.pid} and @file{.socket}, both prefixed with the display server index -@footnote{@file{0.pid} and @file{0.socket} if -the display server index is 0.}. The @file{.pid} -file contains the process ID of the display server -and is used by the kernel to figure out whether -an display server index is still in use or just -not properly cleaned up. Of course it can be used -by any program to find the process ID of the -kernel process of a display server instance. -The @file{.socket} is the domain socket used -for communication with the display server and -its servers and clients. +@footnote{@file{0.pid} and @file{0.socket} if the +display server index is 0.}. The @file{.pid} file +contains the process ID of the display server and is +used by the kernel to figure out whether an display +server index is still in use or just not properly +cleaned up. Of course it can be used by any program +to find the process ID of the kernel process of a +display server instance. The @file{.socket} is the +domain socket used for communication with the display +server and its servers and clients. @@ -773,12 +760,11 @@ its servers and clients. @cpindex Display server kernel @pgindex @command{mds} Message passing over domain sockets is the -underlaying technique for communicating with -the display server. To communicate with the -display server in the local machine a process -must connect to the domain socket created by -the display server kernel as named in -@ref{Filesystem}. +underlaying technique for communicating with the +display server. To communicate with the display +server in the local machine a process must connect +to the domain socket created by the display server +kernel as named in @ref{Filesystem}. @cpindex Connecting to the display @cpindex Client ID assignment @@ -800,32 +786,27 @@ Message ID: 0\n @cpindex Message ID @cpindex Message corruption @cpindex Corrupt messages -where @code{\n} is an LF-line break. -The value on the @code{Message ID} line -does not need to be 0, but servers and -clients often start with 0 and count -upwards. The value is however bound to -an unsigned 32-bit integer. All message -must contain this @code{Message ID} header, -otherwise the message is considered corrupt -and is ignored. +where @code{\n} is an LF-line break. The value on the +@code{Message ID} line does not need to be 0, but +servers and clients often start with 0 and count +upwards. The value is however bound to an unsigned +32-bit integer. All message must contain this +@code{Message ID} header, otherwise the message is +considered corrupt and is ignored. @cpindex Message structure @cpindex Message passing, message structure @cpindex Communication, message structure @cpindex Interprocess communication, message structure -The empty line signifies the end of the -header list, and in this case the end of -the message. But a message may contain -payload beneath this empty line. To -include a payload, add the header -@code{Length} that says how many bytes -the payload is comprised. - -A header must contain a header name and -header value without any trailing or -leading spaces, and `: ' (colon, one -regular blank space) exactly delimits +The empty line signifies the end of the header list, +and in this case the end of the message. But a +message may contain payload beneath this empty line. +To include a payload, add the header @code{Length} +that says how many bytes the payload is comprised. + +A header must contain a header name and header value +without any trailing or leading spaces, and `: ' +(colon, one regular blank space) exactly delimits the name and the value. @cpindex Master server @@ -834,22 +815,18 @@ the name and the value. @cpindex ID assignment @cpindex Assignment of ID When the master server receives this -@code{Command: assign-id} message it -will assign the client a unique ID -and send it to the client.@footnote{The -master server is the only server than -can address the client uniquely before -it has an ID, so this part can only -be implement in the master server.} -If the client already has an ID, it -will send back that ID to the client. -This response consists of two headers -@code{ID assignment} and @code{In -response to}, containing the client's -new (or possibly already assigned) ID -and the value that was in the -@code{Message ID} header, respectively. -For example: +@code{Command: assign-id} message it will assign the +client a unique ID and send it to the +client.@footnote{The master server is the only server +than can address the client uniquely before it has an +ID, so this part can only be implement in the master +server.} If the client already has an ID, it will +send back that ID to the client. This response +consists of two headers @code{ID assignment} and +@code{In response to}, containing the client's +new (or possibly already assigned) ID and the value +that was in the @code{Message ID} header, +respectively. For example: @example @group @@ -860,29 +837,24 @@ In response to: 0\n @end example @cpindex Message ID -Notice that the master server never -includes @code{Message ID} in message -originating from it. - -As seen in this example, the client ID -consists of two integers delimited by -a colon (`:'). Both of these integers -are unsigned 32-bit integers. This is -done this way because unsigned 64-bit -integers are forbidden because it is -not supported natively be some -programming languages. - -Before a client has gotten a unique client -ID assigned to it, it will be `0:0'. +Notice that the master server never includes +@code{Message ID} in message originating from it. + +As seen in this example, the client ID consists of +two integers delimited by a colon (`:'). Both of +these integers are unsigned 32-bit integers. This is +done this way because unsigned 64-bit integers are +forbidden because it is not supported natively be +some programming languages. + +Before a client has gotten a unique client ID +assigned to it, it will be `0:0'. @cpindex Disconnection -If a client gets disconnected from the -master server, the master server will -sends out a signal header message. -This header will be @code{Client closed} -and contain ID of the client that closed. -For example: +If a client gets disconnected from the master server, +the master server will sends out a signal header +message. This header will be @code{Client closed} +and contain ID of the client that closed. For example: @example @group @@ -891,9 +863,8 @@ Client closed: 0:1\n @end group @end example -Be aware that if a server or client -closes and does not have a unique client -ID, this message will be: +Be aware that if a server or client closes and does +not have a unique client ID, this message will be: @example @group @@ -906,21 +877,17 @@ Client closed: 0:0\n @cpindex Message passing, addressing @cpindex Communication, addressing @cpindex Interprocess communication, addressing -Once a client has an unique client ID -assigned to it, it should always include -the header @code{Client ID} in its -messages. The value of @code{Client ID} -should be the client's ID@. If a server -wants to address this client, it should -include the header @code{To} with the -value set to the recipient's client ID@. -Be aware that such message may not be -sent to that recipient uniquely, any -server or client is free to sign up -for receive of such message, any messages -or message contain any other header or -header--value pair that may also be -included in the header. +Once a client has an unique client ID assigned to it, +it should always include the header @code{Client ID} +in its messages. The value of @code{Client ID} should +be the client's ID@. If a server wants to address +this client, it should include the header @code{To} +with the value set to the recipient's client ID@. +Be aware that such message may not be sent to that +recipient uniquely, any server or client is free to +sign up for receive of such message, any messages +or message contain any other header or header--value +pair that may also be included in the header. @@ -939,28 +906,24 @@ included in the header. @cpindex Eavesdropping, message passing As discussed in @ref{Interprocess Communication}, interception in the primary feature of -@command{mds}'s message passing system. -Not only does it enable servers to select -which message it wants to receive in order -to provide it's service. It also enables -clients to do anything, things that was -never anticipated. As an example of its -power, @command{mds} does not provide any -protocol for taking screenshots or recording -a session. Instead, a screenshot application -signs up for messages passed between the -compositor and presentation servers, and -simply requests that the compositor resends -the screen, a feature intended for the -presentation servers. A screen recoding -application would do the same and just -hang on and record all message passed +@command{mds}'s message passing system. Not only does +it enable servers to select which message it wants to +receive in order to provide it's service. It also +enables clients to do anything, things that was never +anticipated. As an example of its power, +@command{mds} does not provide any protocol for +taking screenshots or recording a session. Instead, +a screenshot application signs up for messages passed +between the compositor and presentation servers, and +simply requests that the compositor resends the +screen, a feature intended for the presentation +servers. A screen recoding application would do the +same and just hang on and record all message passed between the servers. -If you want your server or client to -receive all messages passed around in -the display server, simply sign up for -all messages: +If you want your server or client to receive all +messages passed around in the display server, simply +sign up for all messages: @example @group @@ -970,9 +933,9 @@ Message ID: 0\n @end group @end example -But if you only want messages contain -the header @code{Command}, include -that header in the payload of the message: +But if you only want messages contain the header +@code{Command}, include that header in the payload +of the message: @example Command: intercept\n @@ -982,9 +945,9 @@ Length: 8\n Command\n @end example -It is allowed to include multiple headers. -You can also be more strict, and require -a specific value for a header, for example: +It is allowed to include multiple headers. You can +also be more strict, and require a specific value +for a header, for example: @example Command: intercept\n @@ -994,13 +957,13 @@ Length: 16\n Command: get-vt\n @end example -You may mix these two types of requirements -freely. Your client will receive any message -that satisfies at least one of the requirements, -these requirements may be split into multiple -message or coalesced into one message; but -you cannot request to include receive a message -if multiple requirements are satisfied. +You may mix these two types of requirements freely. +Your client will receive any message that satisfies +at least one of the requirements, these requirements +may be split into multiple message or coalesced into +one message; but you cannot request to include +receive a message if multiple requirements are +satisfied. Alternatively you can choose to stop receiving message that satisfies requirements. For example: @@ -1023,16 +986,15 @@ Message ID: 1\n \n @end example -Note that this will stop you from receiving -messages contain the @code{To} header addressed -to you until you request to receiving such -messages again. +Note that this will stop you from receiving messages +contain the @code{To} header addressed to you until +you request to receiving such messages again. -When you sign up for message you may request -to be able to modify them before that are -send to the next client in the list of client -that should receive them. To do this include -the header--value pair @code{Modifying: yes}: +When you sign up for message you may request to be +able to modify them before that are send to the next +client in the list of client that should receive +them. To do this include the header--value pair +@code{Modifying: yes}: @example Command: intercept\n @@ -1043,16 +1005,14 @@ Length: 30\n Command: keyboard-enumeration\n @end example -It is up to the client to keep track of -which message that it may modify. When -you receive a message that you can modify -you must respond when you are done with -the message. +It is up to the client to keep track of which message +that it may modify. When you receive a message that +you can modify you must respond when you are done +with the message. -For example, if you have signed up -for @code{Command: keyboard-enumeration} -with the ability to modify such messages -and the message +For example, if you have signed up for +@code{Command: keyboard-enumeration} with the ability +to modify such messages and the message @example Command: keyboard-enumeration\n @@ -1064,8 +1024,7 @@ Length: 7\n kernel\n @end example -is send from a server, you may receive -it as +is send from a server, you may receive it as @example Command: keyboard-enumeration\n @@ -1078,23 +1037,19 @@ Modify ID: 4\n kernel\n @end example -Be aware that the @code{Modify ID} may -be included even if you have not signed -up to be able to modify the message, -it is enough that one client before you -has or it was originally included -@footnote{You may however not include -this header when you send out an +Be aware that the @code{Modify ID} may be included +even if you have not signed up to be able to modify +the message, it is enough that one client before you +has or it was originally included @footnote{You may +however not include this header when you send out an orginal message.}. -If you receive the message as such -and want to add the line -@code{on-screen-keyboard-20376} to -the payload should send out: -@footnote{The first line containing -starting with @code{Message ID} is an -example, it should be whatever is -appropriate for your client.} +If you receive the message as such and want to add +the line @code{on-screen-keyboard-20376} to the +payload should send out: @footnote{The first line +containing starting with @code{Message ID} is an +example, it should be whatever is appropriate for +your client.} @example Modify ID: 4\n @@ -1113,8 +1068,8 @@ kernel\n on-screen-keyboard-20376\n @end example -If you however decide not to modify -the message send out +If you however decide not to modify the message send +out @example Modify ID: 4\n @@ -1125,12 +1080,10 @@ Modify: no\n @cpindex Message consumption, message passing @cpindex Consumption, interception, message passing -There is also a third option: -to consume to the message. This -stops any further clients from -receiving the message. This is -done by modifying the message -into an empty message: +There is also a third option: to consume to the +message. This stops any further clients from +receiving the message. This is done by modifying +the message into an empty message: @example Modify ID: 4\n @@ -1139,34 +1092,25 @@ Modify: yes\n \n @end example -You may choose to include the -header--value pair @code{Length: 0}, -it is however redundant and +You may choose to include the header--value pair +@code{Length: 0}, it is however redundant and discouraged. @cpindex Interception priority, message passing @cpindex Priority, interception, message passing -This mechanism of being able to -modify message does not make much -sense unless you can control in -the order the clients receive -messages. This is done with what -is called priority. The higher -priority you have, the earlier -you will receive the message. The -default priority is zero, and the -priority is bound to a signed -64-bit integer. If you want to -be able to list yourself in -@code{Command: keyboard-enumeration} -message, you should sign up -with a positive priority since -the final recipient or requested -the enumeration will receive it -with priority zero. Therefore -you should sign up for such message -with a message like: -@footnote{4611686018427387904 is +This mechanism of being able to modify message does +not make much sense unless you can control in the +order the clients receive messages. This is done with +what is called priority. The higher priority you +have, the earlier you will receive the message. The +default priority is zero, and the priority is bound +to a signed 64-bit integer. If you want to be able to +list yourself in @code{Command: keyboard-enumeration} +message, you should sign up with a positive priority +since the final recipient or requested the +enumeration will receive it with priority zero. +Therefore you should sign up for such message with a +message like: @footnote{4611686018427387904 is halfway to the maximium value.} @example @@ -1200,7 +1144,8 @@ the minimum value of any signed value with a fixed bit-size is the negative of its maximum value, that is, the minimum value @code{int16_t} is to be assumed to be @code{-INT16_MAX} (@math{-32767}) rather than -@code{INT16_MIN} (@math{-32768} with two's complement.) +@code{INT16_MIN} (@math{-32768} with two's +complement.) @item Integers that are not especially encoded must not be @@ -1216,35 +1161,32 @@ can be properly stored and used. @cpindex Integers, unsigned, restriction @cpindex Unsigned integer, restriction @cpindex Restrictions on unsigned integers -Integer 64-bits that are not especially encoded -must not be unsigned if the bit-size is fixed. -This is because some programming languages -primitive integers are limited to 64-bits and -are signed; a large enough unsigned 64-bit -integer would overflow. +Integer 64-bits that are not especially encoded must +not be unsigned if the bit-size is fixed. This is + because some programming languages primitive +integers are limited to 64-bits and are signed; a +large enough unsigned 64-bit integer would overflow. @item @cpindex Endianness, portability -Native endianness when a endianness is choosen. -Do not assume big endianness, but the same -endianness that appear on the same machine when -using C@. +Native endianness when a endianness is choosen. Do +not assume big endianness, but the same endianness +that appear on the same machine when using C@. @item @cpindex UTF-8, portability @cpindex Strings, portibility -All strings musts be encoded in UTF-8 without -any NUL-character unless express permission -is given. NUL-character may be encoded either -using a zero byte or using Modified UTF-8, where -it is encoded using two bytes. Which is used is -selected in the protocol, however headers and -their values must not include NUL-characters. -No character may be encoded with more bytes than -necessary. Encoding a character in extra long -form is a security issue, and is prune to bugs, -and is hence disallowed by newer specifications -of UTF-8. +All strings musts be encoded in UTF-8 without any +NUL-character unless express permission is given. +NUL-character may be encoded either using a zero byte +or using Modified UTF-8, where it is encoded using +two bytes. Which is used is selected in the protocol, +however headers and their values must not include +NUL-characters. No character may be encoded with more +bytes than necessary. Encoding a character in extra +long form is a security issue, and is prune to bugs, +and is hence disallowed by newer specifications of +UTF-8. @item @cpindex New line, portability @@ -1279,11 +1221,11 @@ any other character, or multiple LF:s. @cpindex Respawning servers, automatic @cpindex Crash resilience @command{mds-respawn} is a utility intended to be used -in @file{$@{XDG_CONFIG_HOME@}/mdsinitrc}. It will spawn -a selected set of servers. If a server it spawns exits -with a bad status, @command{mds-respawn} will respawn it. -@command{mds-respawn} supports two options in the command -line: +in @file{$@{XDG_CONFIG_HOME@}/mdsinitrc}. It will +spawn a selected set of servers. If a server it +spawns exits with a bad status, @command{mds-respawn} +will respawn it. @command{mds-respawn} supports two +options in the command line: @table @option @item --alarm=SECONDS @@ -1318,17 +1260,17 @@ mds-respawn --interval=5 \ @opindex @option{--initial-spawn} @opindex @option{--respawn} will spawn and supervise the servers @command{mds-foo} -and @command{mds-bar}. Both spawned with the -argument @option{--initial-spawn}. When a server is -respawed by @command{mds-respawn}, @option{--initial-spawn} -in its argument list will be replaced by +and @command{mds-bar}. Both spawned with the argument +@option{--initial-spawn}. When a server is respawed +by @command{mds-respawn}, @option{--initial-spawn} in +its argument list will be replaced by @option{--respawn} to let the server know it is being respawned. @sgindex @code{SIGTERM} A server is considered to exit with a failure status -unless it exits with the return value 0 or is terminated -by the signal @code{SIGTERM}@. +unless it exits with the return value 0 or is +terminated by the signal @code{SIGTERM}@. @@ -1342,16 +1284,17 @@ by the signal @code{SIGTERM}@. @cpindex Registry of protocols @opindex @option{--list} @opindex @option{--wait} -@command{mds-reg} is a utility that can be used to list -available protocols provided by running servers. It can -also wait for a set of protocols to become available. To -list all available protocols run @command{mds-reg --list}. -And to wait for the protocol @code{foo} run -@command{mds-reg --wait=foo}. To also wait for the protocol -@code{bar} run @command{mds-reg --wait=foo,bar} or -@command{mds-reg --wait=foo --wait=bar}. Both of these -styles can be mixed if you want to wait for even more -protocols. +@command{mds-reg} is a utility that can be used to +list available protocols provided by running servers. +It can also wait for a set of protocols to become +available. To list all available protocols run +@command{mds-reg --list}. And to wait for the +protocol @code{foo} run @command{mds-reg --wait=foo}. +To also wait for the protocol @code{bar} run +@command{mds-reg --wait=foo,bar} or +@command{mds-reg --wait=foo --wait=bar}. Both of +thesestyles can be mixed if you want to wait for +even more protocols. @@ -1361,8 +1304,9 @@ protocols. @pgindex @command{mds-clip} @cpindex Clipboard @command{mds-clip} is a utility that can be used to -review the clipboards on the display and manipulate them. -@command{mds-clip} recognises the following options: +review the clipboards on the display and manipulate +them. @command{mds-clip} recognises the following +options: @table @option @item --push @@ -1426,9 +1370,10 @@ Can be used with @option{--stdin} or @option{--list}. If used with @option{--stdin}, an line containing only @var{DELIMITER} will delimit two values that should be placed in the clipboard. If used with -@option{--list}, a line containing only @var{DELIMITER} -will delimit two values in the output. The default -delimiter for @option{--list} is an empty line. +@option{--list}, a line containing only +@var{DELIMITER} will delimit two values in the +output. The default delimiter for @option{--list} +is an empty line. @item -1 @opindex @option{-1} @@ -1464,34 +1409,34 @@ following options: @table @option @item --monitor @opindex @option{--monitor} -Take screenshot of the monitor. The rat will -be used to select monitor. +Take screenshot of the monitor. The rat will be used +to select monitor. @item --monitor=WINDOW_ID @opindex @option{--monitor} Take screenshot of the monitor whose root window's -window ID is @var{WINDOW_ID} or has another window -in it whose window ID is @var{WINDOW_ID}@. +window ID is @var{WINDOW_ID} or has another window in +it whose window ID is @var{WINDOW_ID}@. @item --embed @opindex @option{--embed} -Take a screenshot of an embedded window. -The rat will be used to select window. +Take a screenshot of an embedded window. The rat will +be used to select window. @item --embed=WINDOW_ID @opindex @option{--monitor} -Take a screenshot of an embedded window whose -window ID is @var{WINDOW_ID}@. +Take a screenshot of an embedded window whose window +ID is @var{WINDOW_ID}@. @item --window @opindex @option{--window} -Take a screenshot a window. -The rat will be used to select window. +Take a screenshot a window. The rat will be used to +select window. @item --window=WINDOW_ID @opindex @option{--window} -Take a screenshot of a window whose -window ID is @var{WINDOW_ID}@. +Take a screenshot of a window whose window ID is +@var{WINDOW_ID}@. @item --decoration @opindex @option{--decoration} @@ -1529,8 +1474,8 @@ specifies the pathname of the saved file. @opindex @option{--monitor} @opindex @option{--embed} If neither @option{--monitor}, @option{--embed} or -@option{--window} is used, a screenshot will be -taked of the display. That is, all monitors. +@option{--window} is used, a screenshot will be taked +of the display. That is, all monitors. @opindex @option{--gamma} @opindex @option{--low-gamma} @@ -1558,33 +1503,30 @@ following options: @table @option @item --embed @opindex @option{--embed} -Kill an embedded window. -The rat will be used to select window. +Kill an embedded window. The rat will be used to +select window. @item --embed=WINDOW_ID @opindex @option{--embed} -Kill an embedded window whose -window ID is @var{WINDOW_ID}@. +Kill an embedded window whose window ID is +@var{WINDOW_ID}@. @item --window @opindex @option{--window} -Kill a window. -The rat will be used to select window. +Kill a window. The rat will be used to select window. @item --window=WINDOW_ID @opindex @option{--window} -Kill a window whose -window ID is @var{WINDOW_ID}@. +Kill a window whose window ID is @var{WINDOW_ID}@. @item --signal=SIGNAL @opindex @option{--signal} -Send the signal @var{SIGNAL} to the -process owning the selected window. +Send the signal @var{SIGNAL} to the process owning +the selected window. @item --no-signal @opindex @option{--no-signal} -Do not send a signal; only identify the -window. +Do not send a signal; only identify the window. @item --keep-cursor @opindex @option{--keep-cursor} @@ -1605,17 +1547,18 @@ Print the ID of the selected window. @cpindex Virtual terminal, switching @cpindex Switching virtual terminal @command{mds-chvt} is a utility similar to the command -@command{chvt} from the @command{kbd} project. However, -@command{mds-chvt} has setuid and therefore does not -require root permissions, but it will only request a -virtual terminal switch if the display server's virtual -terminal is in the foreground. @command{mds-chvt} -recognises the following options: +@command{chvt} from the @command{kbd} project. +However, @command{mds-chvt} has setuid and therefore +does not require root permissions, but it will only +request a virtual terminal switch if the display +server's virtual terminal is in the foreground. +@command{mds-chvt} recognises the following options: @table @option @item --switch=VT @opindex @option{--switch} -Switch to the virtual terminal with the index @var{VT}@. +Switch to the virtual terminal with the index +@var{VT}@. @end table @@ -1643,10 +1586,10 @@ TODO how to use mds-kbdc @pgindex @file{mdsinitrc} Servers let you use the option @option{--on-init-fork} to put the process in the background when it has been -initialised. This can used to spawn that depend on each -other in linear order. For example, if @command{mds-bar} -requires that @command{mds-foo} is initialised before it -can be initialised, you can in +initialised. This can used to spawn that depend on +each other in linear order. For example, if +@command{mds-bar} requires that @command{mds-foo} is +initialised before it can be initialised, you can in @file{$@{XDG_CONFIG_HOME@}/mdsinitrc} write: @example @@ -1661,15 +1604,16 @@ mds-bar & @pgindex @command{mds-respawn} @pgindex @command{cmdipc} @pgindex @command{ipcmd} -This will start @command{mds-bar} when @command{mds-foo} -has been initialised. However if one of them crashes, -that server will not respawn; to fix this @command{mds-respawn} -can be used, but use of @command{mds-respawn} hinders -the use of @option{--on-init-fork}. Instead you can use -@option{--on-init-sh} and global semaphores. The packages, -and commands, @command{cmdipc} and @command{ipcmd} can be -used for this purpose. We will use @command{cmdipc} in an -example: +This will start @command{mds-bar} when +@command{mds-foo} has been initialised. However if +one of them crashes, that server will not respawn; to +fix this @command{mds-respawn} can be used, but use +of @command{mds-respawn} hinders the use of +@option{--on-init-fork}. Instead you can use +@option{--on-init-sh} and global semaphores. The +packages, and commands, @command{cmdipc} and +@command{ipcmd} can be used for this purpose. We will +use @command{cmdipc} in an example: @ifset AFOURPAPER @example @@ -1717,20 +1661,21 @@ mds-respawn @{ mds-bar @} & # Spawn `mds-bar`. @end ifclear @pgindex @command{mds-reg} -This is however seldom necessary as @command{mds-reg} can -often be used instead, with more abstraction as you would -only need to specify what servers need to wait for, not -what they provide. +This is however seldom necessary as @command{mds-reg} +can often be used instead, with more abstraction as +you would only need to specify what servers need to +wait for, not what they provide. @pgindex @command{setpgrp} @cpindex Display server process group @cpindex Process group, display server -Another useful command (and package) is @command{setpgrp}. -@command{mds} puts itself an all its children in a new -process group. However you may want to put processes that -are not @command{mds} servers or @command{mds} utilities -in a separate process group. @command{setpgrp} can be used -to starta process in a new process group. +Another useful command (and package) is +@command{setpgrp}. @command{mds} puts itself an all +its children in a new process group. However you may +want to put processes that are not @command{mds} +servers or @command{mds} utilities in a separate +process group. @command{setpgrp} can be used to start +a process in a new process group. @@ -1742,12 +1687,13 @@ to starta process in a new process group. @cpindex Kernel @cpindex Display server kernel @cpindex Master server -An @command{mds} display server instance is comprised of -multiple small servers that each implements a small part -of the display server's functionallity. This chapter will -include all servers but the master server, @command{mds-server} -and the kernel, @command{mds}, the latter of which is not -actually a server. +An @command{mds} display server instance is comprised +of multiple small servers that each implements a +small part of the display server's functionallity. +This chapter will include all servers but the master +server, @command{mds-server} and the kernel, +@command{mds}, the latter of which is not actually a +server. @menu * mds-echo:: The @command{mds-echo} server. @@ -1819,10 +1765,11 @@ actually a server. @cpindex Debugging @cpindex Heartbeat @cpindex Network heartbeat -@command{mds-echo} is a server that echos message that -contain the header--value pair @command{Command: echo}. -This server can be used for debugging and testing as -well as to enable network heartbeats. +@command{mds-echo} is a server that echos message +that contain the header--value pair +@command{Command: echo}. +This server can be used for debugging and testing +as well as to enable network heartbeats. @@ -1834,10 +1781,11 @@ well as to enable network heartbeats. @cpindex Protocols, listing @cpindex Protocol registry @cpindex Registry of protocols -@command{mds-registry} is a server that keeps a registry -of all protocols that are supported they the sum of all -active servers. It can also be used by other servers to -wait until a protocol has become available. +@command{mds-registry} is a server that keeps a +registry of all protocols that are supported they the +sum of all active servers. It can also be used by +other servers to wait until a protocol has become +available. @@ -1892,8 +1840,8 @@ package. @cpindex Clipboard @command{mds} has three clipboards, one for copied text, one for selected text, and one for non-textual -data. Each of these clipboards are stacks, just -like in GNU Emacs. @command{mds-clipboard} implements +data. Each of these clipboards are stacks, just like +in GNU Emacs. @command{mds-clipboard} implements these clipboards and automatic removal of outdated clips. Clips can be configured to expire based on time or when its originator closes. @@ -1920,13 +1868,14 @@ drag-and-drop support. @cpindex Keycodes @cpindex Keycodes, remapping @cpindex Keyboard, remapping -@command{mds-kkbd} implements access to the kernel-based -keyboard. It does not however implement delay and rate -configurations for the kernel-based keyboard as that -requires root privileges. The kernel-based keyboard is -a keyboard that can be accessed by reconfiguring -stdin in a TTY using @code{ioctl} and then read from -stdin. @command{mds-kkbd} does not implement any keyboard +@command{mds-kkbd} implements access to the +kernel-based keyboard. It does not however implement +delay and rate configurations for the kernel-based +keyboard as that requires root privileges. The +kernel-based keyboard is a keyboard that can be +accessed by reconfiguring stdin in a TTY using +@code{ioctl} and then read from stdin. +@command{mds-kkbd} does not implement any keyboard layout, rather it broadcasts scancodes and keycodes. However it can remap keycodes, but not scancodes. |