From 969899ccae0ad9ce7f829ebf08c35ac4278a4bce Mon Sep 17 00:00:00 2001
From: Mattias Andrée <maandree@member.fsf.org>
Date: Tue, 5 Jan 2016 17:55:36 +0100
Subject: begin on texinfo manual
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Mattias Andrée <maandree@member.fsf.org>
---
 doc/info/libred.texinfo | 104 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 doc/info/libred.texinfo

(limited to 'doc/info/libred.texinfo')

diff --git a/doc/info/libred.texinfo b/doc/info/libred.texinfo
new file mode 100644
index 0000000..d0466ca
--- /dev/null
+++ b/doc/info/libred.texinfo
@@ -0,0 +1,104 @@
+\input texinfo   @c -*-texinfo-*-
+@c %**start of header
+@documentencoding UTF-8
+@include reusable/macros.texinfo
+@copying
+@c --------------------------------------------------------------------------------
+Copyright @copyright{} 2016  @w{Mattias Andrée @e{maandree@@member.fsf.org}}
+
+@quotation
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version@tie{}1.3 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being ``Free Software Needs Free Documentation'', the
+``GNU General Public License'', the ``GNU Free Documentation License'',
+with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the
+license is included in the section entitled ``GNU Free Documentation License''.
+@end quotation
+@c THIS WAS LAST CHANGED 2016-JANUARY-05 UTC
+@c When updated, please remember to update hardcopy-copying.texinfo too.
+@c --------------------------------------------------------------------------------
+@end copying
+
+@setfilename libred.info
+@settitle libred
+@documentlanguage en_GB
+@include titlepage-data.texinfo
+
+@c  You can change the title of the document in dir by compiling with
+@c    INFO_FLAGS='-c CATEGORY=your_new_category'
+@ifclear CATEGORY
+@set CATEGORY Library
+@end ifclear
+
+@dircategory @value{CATEGORY}
+@direntry
+* libred: (libred).                 @value{subtitle}
+@end direntry
+
+@documentdescription
+Reference manual for libred.
+A library for calculating solar elevations
+and colour temperatures.
+@end documentdescription
+@c %**end of header
+
+
+@iftex
+@c @set USLETTER
+@c @set AFOURPAPER
+@c @set AFIVEPAPER
+@c @set SMALLBOOK
+
+@c @set HARDCOPY
+@c @set CROPMARKS
+@c @set SKIPCHAPTERNEWPAGE
+@c @set SKIPFONTTEXTSIZE
+@end iftex
+@c @set LOGO
+@c @set DOUBLEHEADINGS
+@c @set SINGLEHEADINGS
+@c @set AMERICANSPACING
+@c @set NOFINALOUT
+
+@ignore
+
+  CROPMARKS has no effect unless HARDCOPY is set. CROPMARKS
+  and AFIVEPAPER (or actually @cropmarks and @afivepaper) does
+  not play well together.
+
+  You can configure how TeX output files should look by uncommenting
+  @set commands above. Do not uncomment more than one of the paper
+  sizes (USLETTER, AFOURPAPER, AFIVEPAPER and SMALLBOOK); if none is
+  uncomment AFOURPAPER will be set unless HARDCOPY is set, in which
+  case SMALLBOOK will be set. However, if you do not want to modify
+  this source file, you can run `make` with for example
+  `TEXINFO_FLAGS='--texinfo="@set HARDCOPY"'`.
+
+  Finally, you can include, on the front page, the version of libred
+  that the manual is up to date with, by setting the value of VERSION
+  to the version of libred, as well as date of the last update by
+  setting DATE, and edition by setting EDITION. This is intended for
+  printed manuals. The date is recommended to not be more accurate,
+  or less accurate, than to the month. The edition should be formatted
+  as, for example, ``1@sup{st}''.
+
+@end ignore
+
+@comment You can see these too with TEXINFO_FLAGS.
+@c @paragraphindent asis
+@c @firstparagraphindent none
+@c @exampleindent asis
+@c @kbdinputstyle distinct
+
+@include reusable/paper.texinfo
+
+
+@include hardcopy-copying.texinfo
+@include reusable/titlepage.texinfo
+@setheadings{}
+
+@include content.texinfo
+
+@bye
+
-- 
cgit v1.2.3-70-g09d2