/** * Copyright © 2016 Mattias Andrée * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #ifndef LIBCLUT_H #define LIBCLUT_H #include #include #include /* Not documented, may be removed or modified in the future. */ #define LIBCLUT_ILLUMINANT_A .white_x = 0.44757, .white_y = 0.40745, .white_Y = 1 #define LIBCLUT_ILLUMINANT_B .white_x = 0.34842, .white_y = 0.35161, .white_Y = 1 #define LIBCLUT_ILLUMINANT_C .white_x = 0.31006, .white_y = 0.31616, .white_Y = 1 #define LIBCLUT_ILLUMINANT_D50 .white_x = 0.34567, .white_y = 0.35850, .white_Y = 1 #define LIBCLUT_ILLUMINANT_D55 .white_x = 0.33242, .white_y = 0.34743, .white_Y = 1 #define LIBCLUT_ILLUMINANT_D65 .white_x = 0.31271, .white_y = 0.32902, .white_Y = 1 #define LIBCLUT_ILLUMINANT_D75 .white_x = 0.29902, .white_y = 0.31485, .white_Y = 1 #define LIBCLUT_ILLUMINANT_E .white_x = 1. / 3, .white_y = 1. / 3, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F1 .white_x = 0.31310, .white_y = 0.33727, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F2 .white_x = 0.37208, .white_y = 0.37529, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F3 .white_x = 0.40910, .white_y = 0.39430, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F4 .white_x = 0.44018, .white_y = 0.40329, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F5 .white_x = 0.31379, .white_y = 0.34531, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F6 .white_x = 0.37790, .white_y = 0.38835, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F7 .white_x = 0.31292, .white_y = 0.32933, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F8 .white_x = 0.34588, .white_y = 0.35875, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F9 .white_x = 0.37417, .white_y = 0.37281, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F10 .white_x = 0.34609, .white_y = 0.35986, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F11 .white_x = 0.38052, .white_y = 0.37713, .white_Y = 1 #define LIBCLUT_ILLUMINANT_F12 .white_x = 0.43695, .white_y = 0.40441, .white_Y = 1 /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the sRGB colour space. * * sRGB does not use a regular gamma function, but rather two different * functions. `libclut_model_linear_to_standard1` and * and `libclut_model_standard_to_linear1` can be used so to convert * between sRGB and linear sRGB. */ #define LIBCLUT_RGB_COLOUR_SPACE_SRGB_INITIALISER \ { \ .red_x = 0.6400, .red_y = 0.3300, .red_Y = 0.212656, \ .green_x = 0.3000, .green_y = 0.6000, .green_Y = 0.715158, \ .blue_x = 0.1500, .blue_y = 0.0600, .blue_Y = 0.072186, \ LIBCLUT_ILLUMINANT_D65 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the Adobe RGB (1998) colour space. * * This gamma colour space's gamma is 2.2. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_ADOBE_RGB_INITIALISER \ { \ .red_x = 0.6400, .red_y = 0.3300, .red_Y = 0.297361, \ .green_x = 0.2100, .green_y = 0.7100, .green_Y = 0.627355, \ .blue_x = 0.1500, .blue_y = 0.0600, .blue_Y = 0.075285, \ LIBCLUT_ILLUMINANT_D65 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the Apple RGB colour space. * * This gamma colour space's gamma is 1.8. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_APPLE_RGB_INITIALISER \ { \ .red_x = 0.6250, .red_y = 0.3400, .red_Y = 0.244634, \ .green_x = 0.2800, .green_y = 0.5950, .green_Y = 0.672034, \ .blue_x = 0.1550, .blue_y = 0.0700, .blue_Y = 0.083332, \ LIBCLUT_ILLUMINANT_D65 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the Best RGB colour space. * * This gamma colour space's gamma is 2.2. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_BEST_RGB_INITIALISER \ { \ .red_x = 0.7347, .red_y = 0.2653, .red_Y = 0.228457, \ .green_x = 0.2150, .green_y = 0.7750, .green_Y = 0.737352, \ .blue_x = 0.1300, .blue_y = 0.0350, .blue_Y = 0.034191, \ LIBCLUT_ILLUMINANT_D50 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the Beta RGB colour space. * * This gamma colour space's gamma is 2.2. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_BETA_RGB_INITIALISER \ { \ .red_x = 0.6888, .red_y = 0.3112, .red_Y = 0.303273, \ .green_x = 0.1986, .green_y = 0.7551, .green_Y = 0.663786, \ .blue_x = 0.1265, .blue_y = 0.0352, .blue_Y = 0.032941, \ LIBCLUT_ILLUMINANT_D50 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the Bruce RGB colour space. * * This gamma colour space's gamma is 2.2. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_BRUCE_RGB_INITIALISER \ { \ .red_x = 0.6400, .red_y = 0.3300, .red_Y = 0.240995, \ .green_x = 0.2800, .green_y = 0.6500, .green_Y = 0.683554, \ .blue_x = 0.1500, .blue_y = 0.0600, .blue_Y = 0.075452, \ LIBCLUT_ILLUMINANT_D65 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the CIE RGB colour space. * * This gamma colour space's gamma is 2.2. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_CIE_RGB_INITIALISER \ { \ .red_x = 0.7350, .red_y = 0.2650, .red_Y = 0.176204, \ .green_x = 0.2740, .green_y = 0.7170, .green_Y = 0.812985, \ .blue_x = 0.1670, .blue_y = 0.0090, .blue_Y = 0.010811, \ LIBCLUT_ILLUMINANT_E \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the ColorMatch RGB colour space. * * This gamma colour space's gamma is 1.8. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_COLORMATCH_RGB_INITIALISER \ { \ .red_x = 0.6300, .red_y = 0.3400, .red_Y = 0.274884, \ .green_x = 0.2950, .green_y = 0.6050, .green_Y = 0.658132, \ .blue_x = 0.1500, .blue_y = 0.0750, .blue_Y = 0.066985, \ LIBCLUT_ILLUMINANT_D50 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the Don RGB 4 colour space. * * This gamma colour space's gamma is 2.2. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_DON_RGB_4_INITIALISER \ { \ .red_x = 0.6960, .red_y = 0.3000, .red_Y = 0.278350, \ .green_x = 0.2150, .green_y = 0.7650, .green_Y = 0.687970, \ .blue_x = 0.1300, .blue_y = 0.0350, .blue_Y = 0.033680, \ LIBCLUT_ILLUMINANT_D50 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the ECI RGB v2 colour space. * * This gamma colour space's used the L* gamma function. It cannot * be used with RGB colour space conversion unless the values are * tranlated into using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_ECI_RGB_V2_INITIALISER \ { \ .red_x = 0.6700, .red_y = 0.3300, .red_Y = 0.320250, \ .green_x = 0.2100, .green_y = 0.7100, .green_Y = 0.602071, \ .blue_x = 0.1400, .blue_y = 0.0800, .blue_Y = 0.077679, \ LIBCLUT_ILLUMINANT_D50 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the Ekta Space PS5 colour space. * * This gamma colour space's gamma is 2.2. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_EKTA_SPACE_PS5_INITIALISER \ { \ .red_x = 0.6950, .red_y = 0.3050, .red_Y = 0.260629, \ .green_x = 0.2600, .green_y = 0.7000, .green_Y = 0.734946, \ .blue_x = 0.1100, .blue_y = 0.0050, .blue_Y = 0.004425, \ LIBCLUT_ILLUMINANT_D50 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the ITU-R Recommendation BT.709 (ITU-R BT.709) colour space. * * This gamma colour space's gamma is 2.4. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_ITU_R_BT_709_INITIALISER \ { \ .red_x = 0.6400, .red_y = 0.3300, .red_Y = 0.212656, \ .green_x = 0.3000, .green_y = 0.6000, .green_Y = 0.715158, \ .blue_x = 0.1500, .blue_y = 0.0600, .blue_Y = 0.072186, \ LIBCLUT_ILLUMINANT_D65 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the Lightroom RGB colour space. * * This gamma colour space's gamma is 1.0. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_LIGHTROOM_RGB_INITIALISER \ { \ .red_x = 0.7347, .red_y = 0.2653, .red_Y = 0.288040, \ .green_x = 0.1596, .green_y = 0.8404, .green_Y = 0.711874, \ .blue_x = 0.0366, .blue_y = 0.0001, .blue_Y = 0.000086, \ LIBCLUT_ILLUMINANT_D50 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the NTSC RGB colour space. * * This gamma colour space's gamma is 2.2. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_NTSC_RGB_INITIALISER \ { \ .red_x = 0.6700, .red_y = 0.3300, .red_Y = 0.298839, \ .green_x = 0.2100, .green_y = 0.7100, .green_Y = 0.586811, \ .blue_x = 0.1400, .blue_y = 0.0800, .blue_Y = 0.114350, \ LIBCLUT_ILLUMINANT_C \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the PAL/SECAM RGB colour space. * * This gamma colour space's gamma is 2.2. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_PAL_SECAM_RGB_INITIALISER \ { \ .red_x = 0.6400, .red_y = 0.3300, .red_Y = 0.222021, \ .green_x = 0.2900, .green_y = 0.6000, .green_Y = 0.706645, \ .blue_x = 0.1500, .blue_y = 0.0600, .blue_Y = 0.071334, \ LIBCLUT_ILLUMINANT_D65 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the ProPhoto RGB colour space. * * This gamma colour space's gamma is 1.8. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_PROPHOTO_RGB_INITIALISER \ { \ .red_x = 0.7347, .red_y = 0.2653, .red_Y = 0.288040, \ .green_x = 0.1596, .green_y = 0.8404, .green_Y = 0.711874, \ .blue_x = 0.0366, .blue_y = 0.0001, .blue_Y = 0.000086, \ LIBCLUT_ILLUMINANT_D50 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the SMPTE-C RGB colour space. * * This gamma colour space's gamma is 2.2. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_SMPTE_C_RGB_INITIALISER \ { \ .red_x = 0.6300, .red_y = 0.3400, .red_Y = 0.212395, \ .green_x = 0.3100, .green_y = 0.5950, .green_Y = 0.701049, \ .blue_x = 0.1550, .blue_y = 0.0700, .blue_Y = 0.086556, \ LIBCLUT_ILLUMINANT_D65 \ } /** * Initialiser for `struct libclut_rgb_colour_space` with the values * of the Wide Gamut RGB colour space. * * This gamma colour space's gamma is 2.2. It cannot be used with * RGB colour space conversion unless the values are tranlated into * using the sRGB gamma function. */ #define LIBCLUT_RGB_COLOUR_SPACE_WIDE_GAMUT_RGB_INITIALISER \ { \ .red_x = 0.7350, .red_y = 0.2650, .red_Y = 0.258187, \ .green_x = 0.1150, .green_y = 0.8260, .green_Y = 0.724938, \ .blue_x = 0.1570, .blue_y = 0.0180, .blue_Y = 0.016875, \ LIBCLUT_ILLUMINANT_D50 \ } /* * name gamma xw yw xr yr xg yg xb yb * ITU-R Recommendation BT.2020 (ITU-R BT.2020) *1 { D65 } 0.708 0.292 0.170 0.797 0.131 0.046 * ITU-R Recommendation BT.2100 (ITU-R BT.2100) *2 { D65 } 0.708 0.292 0.170 0.797 0.131 0.046 * DCI-P3 D65 ? { D65 } 0.680 0.320 0.265 0.690 0.150 0.060 * DCI-P3 Theater ? 0.314 0.351 0.680 0.320 0.265 0.690 0.150 0.060 * https://en.wikipedia.org/wiki/Rec._601 * * *1 https://en.wikipedia.org/wiki/Rec._2020#Transfer_characteristics * *2 http://www.itu.int/dms_pubrec/itu-r/rec/bt/R-REC-BT.2100-0-201607-I!!PDF-E.pdf */ /** * RGB colour space structure. */ typedef struct libclut_rgb_colour_space { /** * The x-component of the red colour's xyY value. */ double red_x; /** * The y-component of the red colour's xyY value. */ double red_y; /** * The Y-component of the red colour's xyY value. */ double red_Y; /** * The x-component of the green colour's xyY value. */ double green_x; /** * The y-component of the green colour's xyY value. */ double green_y; /** * The Y-component of the green colour's xyY value. */ double green_Y; /** * The x-component of the blue colour's xyY value. */ double blue_x; /** * The y-component of the blue colour's xyY value. */ double blue_y; /** * The Y-component of the blue colour's xyY value. */ double blue_Y; /** * The x-component of the white point's xyY value. */ double white_x; /** * The y-component of the white point's xyY value. */ double white_y; /** * The Y-component of the white point's xyY value. */ double white_Y; } libclut_rgb_colour_space_t; /** * Matrix date-type for colour space conversion. */ typedef double libclut_colour_space_conversion_matrix_t[3][3]; /* This is to avoid warnings about comparing double, These are only * used when it is safe, for example to test whether optimisations * are possible. { */ #if defined(__GNUC__) || defined(__clang__) # pragma GCC diagnostic push # pragma GCC diagnostic ignored "-Wfloat-equal" #endif static inline int libclut_eq__(double a, double b) { return a == b; } static inline int libclut_1__(double x) { return libclut_eq__(x, 1); } static inline int libclut_0__(double x) { return libclut_eq__(x, 0); } #if defined(__GNUC__) || defined(__clang__) # pragma GCC diagnostic pop #endif /* } */ #if defined(__clang__) # pragma GCC diagnostic push # pragma GCC diagnostic ignored "-Wdocumentation" #endif /** * Apply contrast correction on the colour curves using sRGB. * * In this context, contrast is a measure of difference between * the whitepoint and blackpoint, if the difference is 0 than * they are both grey. * * None of the parameter may have side-effects. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r The contrast parameter for the red curve. * @param g The contrast parameter for the green curve. * @param b The contrast parameter for the blue curve. */ #define libclut_rgb_contrast(clut, max, type, r, g, b) \ do \ { \ const double h__ = (double)5 / 10; \ if (!libclut_1__(r)) \ libclut__(clut, red, type, (LIBCLUT_VALUE - (max) * h__) * (r) + (max) * h__); \ if (!libclut_1__(g)) \ libclut__(clut, green, type, (LIBCLUT_VALUE - (max) * h__) * (g) + (max) * h__); \ if (!libclut_1__(b)) \ libclut__(clut, blue, type, (LIBCLUT_VALUE - (max) * h__) * (b) + (max) * h__); \ } \ while (0) /** * Apply contrast correction on the colour curves using CIE xyY. * * In this context, contrast is a measure of difference between * the whitepoint and blackpoint, if the difference is 0 than * they are both grey. * * None of the parameter may have side-effects. * * Requires linking with '-lclut'. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r The contrast parameter for the red curve. * @param g The contrast parameter for the green curve. * @param b The contrast parameter for the blue curve. */ #define libclut_cie_contrast(clut, max, type, r, g, b) \ do \ { \ const double h__ = (double)5 / 10; \ libclut_cie__(clut, max, type, libclut_eq__((r), (g)) && libclut_eq__((g), (b)), \ !libclut_1__(r), !libclut_1__(g), !libclut_1__(b), \ (Y__ - h__) * (r) + h__, (Y__ - h__) * (g) + h__, (Y__ - h__) * (b) + h__); \ } \ while (0) /** * Apply brightness correction on the colour curves using sRGB. * * In this context, brightness is a measure of the whiteness of the whitepoint. * * None of the parameter may have side-effects. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r The brightness parameter for the red curve. * @param g The brightness parameter for the green curve. * @param b The brightness parameter for the blue curve. */ #define libclut_rgb_brightness(clut, max, type, r, g, b) \ do \ { \ if (!libclut_1__(r)) libclut__(clut, red, type, LIBCLUT_VALUE * (r)); \ if (!libclut_1__(g)) libclut__(clut, green, type, LIBCLUT_VALUE * (g)); \ if (!libclut_1__(b)) libclut__(clut, blue, type, LIBCLUT_VALUE * (b)); \ } \ while (0) /** * Apply brightness correction on the colour curves using CIE xyY. * * In this context, brightness is a measure of the whiteness of the whitepoint. * * None of the parameter may have side-effects. * * Requires linking with '-lclut'. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r The brightness parameter for the red curve. * @param g The brightness parameter for the green curve. * @param b The brightness parameter for the blue curve. */ #define libclut_cie_brightness(clut, max, type, r, g, b) \ libclut_cie__(clut, max, type, libclut_eq__((r), (g)) && libclut_eq__((g), (b)), \ !libclut_1__(r), !libclut_1__(g), !libclut_1__(b), \ Y__ * (r), Y__ * (g), Y__ * (b)) /** * Convert the curves from formatted in standard RGB to linear sRGB. * * None of the parameter may have side-effects. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_standard_to_linear1` is not undefined. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r Whether to convert the red colour curve. * @param g Whether to convert the green colour curve. * @param b Whether to convert the blue colour curve. */ #define libclut_linearise(clut, max, type, r, g, b) \ do \ { \ double m__ = (double)(max); \ if (r) \ libclut__(clut, red, type, m__ * libclut_model_standard_to_linear1(LIBCLUT_VALUE / m__)); \ if (g) \ libclut__(clut, green, type, m__ * libclut_model_standard_to_linear1(LIBCLUT_VALUE / m__)); \ if (b) \ libclut__(clut, blue, type, m__ * libclut_model_standard_to_linear1(LIBCLUT_VALUE / m__)); \ } \ while (0) /** * Convert the curves from formatted in linear sRGB to standard RGB. * * None of the parameter may have side-effects. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_linear_to_standard1` is not undefined. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r Whether to convert the red colour curve. * @param g Whether to convert the green colour curve. * @param b Whether to convert the blue colour curve. */ #define libclut_standardise(clut, max, type, r, g, b) \ do \ { \ double m__ = (double)(max); \ if (r) \ libclut__(clut, red, type, m__ * libclut_model_linear_to_standard1(LIBCLUT_VALUE / m__)); \ if (g) \ libclut__(clut, green, type, m__ * libclut_model_linear_to_standard1(LIBCLUT_VALUE / m__)); \ if (b) \ libclut__(clut, blue, type, m__ * libclut_model_linear_to_standard1(LIBCLUT_VALUE / m__)); \ } \ while (0) /** * Convert the curves between two RGB colour spaces. * * Both RGB colour spaces must have same gamma functions as sRGB. * * Requires that `clut->red_size`, `clut->green_size` * and `clut->blue_size` are equal. * * None of the parameter may have side-effects. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_linear_to_standard1`, * `libclut_model_standard_to_linear1`, or * `libclut_model_convert_rgb` is not undefined. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param m Conversion matrix. Can be created with * `libclut_model_get_rgb_conversion_matrix`. * @param trunc Truncate values that are out of gamut. */ #define libclut_convert_rgb_inplace(clut, max, type, m, trunc) \ do \ { \ double m__ = (double)(max), r__, g__, b__; \ size_t i__, n__ = (clut)->red_size; \ for (i__ = 0; i__ < n__; i__++) \ { \ r__ = (clut)->red[i__] / m__; \ g__ = (clut)->green[i__] / m__; \ b__ = (clut)->blue[i__] / m__; \ libclut_model_convert_rgb(r__, g__, b__, m, &r__, &g__, &b__); \ r__ *= m__; \ g__ *= m__; \ b__ *= m__; \ if (trunc) \ { \ if (r__ < 0) \ r__ = 0; \ else if (r__ > m__) \ r__ = m__; \ if (g__ < 0) \ g__ = 0; \ else if (g__ > m__) \ g__ = m__; \ if (b__ < 0) \ b__ = 0; \ else if (b__ > m__) \ b__ = m__; \ } \ (clut)->red[i__] = (type)r__; \ (clut)->green[i__] = (type)g__; \ (clut)->blue[i__] = (type)b__; \ } \ } \ while (0) /** * Convert the curves between two RGB colour spaces. * * Both RGB colour spaces must have same gamma functions as sRGB. * * None of the parameter may have side-effects. * * Requires linking with '-lclut' if * `libclut_model_linear_to_standard1`, * `libclut_model_standard_to_linear1`, or * `libclut_model_convert_rgb` is not undefined. * Always requires linking with '-lm'. * * @param clut Pointer to the input gamma ramps, must have the * arrays `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param m Conversion matrix. Can be created with * `libclut_model_get_rgb_conversion_matrix`. * @param trunc Truncate values that are out of gamut. * @param out Pointer to the output gamma ramps, must have the * arrays `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. */ #define libclut_convert_rgb(clut, max, type, m, trunc, out) \ do \ { \ double m__ = (double)(max), r__, g__, b__, x__, y__; \ size_t rn__ = (clut)->red_size; \ size_t gn__ = (clut)->green_size; \ size_t bn__ = (clut)->blue_size; \ double w__; \ size_t i__, j__, jj__; \ for (i__ = 0; i__ < rn__; i__++) \ { \ w__ = (double)i__ * gn__ / rn__; \ j__ = (size_t)w__; \ jj__ = j__ == gn__ ? j__ : (j__ + 1); \ w__ = fmod(j__, (double)1); \ x__ = (clut)->green[j__] / m__; \ y__ = (clut)->green[jj__] / m__; \ x__ = libclut_model_standard_to_linear1(x__); \ y__ = libclut_model_standard_to_linear1(y__); \ g__ = x__ * (1 - w__) + y__ * w__; \ \ w__ = (double)i__ * bn__ / rn__; \ j__ = (size_t)w__; \ jj__ = j__ == bn__ ? j__ : (j__ + 1); \ w__ = fmod(j__, (double)1); \ x__ = (clut)->blue[j__] / m__; \ y__ = (clut)->blue[jj__] / m__; \ x__ = libclut_model_standard_to_linear1(x__); \ y__ = libclut_model_standard_to_linear1(y__); \ b__ = x__ * (1 - w__) + y__ * w__; \ \ r__ = (M)[0][0] * r__ + (M)[0][1] * g__ + (M)[0][2] * b__; \ r__ = libclut_model_linear_to_standard1(r__); \ r__ *= m__; \ if (trunc) \ { \ if (r__ < 0) \ r__ = 0; \ else if (r__ > m__) \ r__ = m__; \ } \ (out)->red[i__] = (type)r__; \ } \ for (i__ = 0; i__ < gn__; i__++) \ { \ w__ = (double)i__ * rn__ / gn__; \ j__ = (size_t)w__; \ jj__ = j__ == rn__ ? j__ : (j__ + 1); \ w__ = fmod(j__, (double)1); \ x__ = (clut)->red[j__] / m__; \ y__ = (clut)->red[jj__] / m__; \ x__ = libclut_model_standard_to_linear1(x__); \ y__ = libclut_model_standard_to_linear1(y__); \ r__ = x__ * (1 - w__) + y__ * w__; \ \ w__ = (double)i__ * bn__ / gn__; \ j__ = (size_t)w__; \ jj__ = j__ == bn__ ? j__ : (j__ + 1); \ w__ = fmod(j__, (double)1); \ x__ = (clut)->blue[j__] / m__; \ y__ = (clut)->blue[jj__] / m__; \ x__ = libclut_model_standard_to_linear1(x__); \ y__ = libclut_model_standard_to_linear1(y__); \ b__ = x__ * (1 - w__) + y__ * w__; \ \ g__ = (M)[1][0] * r__ + (M)[0][1] * g__ + (M)[1][2] * b__; \ g__ = libclut_model_linear_to_standard1(g__); \ g__ *= m__; \ if (trunc) \ { \ if (g__ < 0) \ g__ = 0; \ else if (g__ > m__) \ g__ = m__; \ } \ (out)->green[i__] = (type)g__; \ } \ for (i__ = 0; i__ < bn__; i__++) \ { \ w__ = (double)i__ * rn__ / bn__; \ j__ = (size_t)w__; \ jj__ = j__ == rn__ ? j__ : (j__ + 1); \ w__ = fmod(j__, (double)1); \ x__ = (clut)->red[j__] / m__; \ y__ = (clut)->red[jj__] / m__; \ x__ = libclut_model_standard_to_linear1(x__); \ y__ = libclut_model_standard_to_linear1(y__); \ r__ = x__ * (1 - w__) + y__ * w__; \ \ w__ = (double)i__ * gn__ / bn__; \ j__ = (size_t)w__; \ jj__ = j__ == gn__ ? j__ : (j__ + 1); \ w__ = fmod(j__, (double)1); \ x__ = (clut)->green[j__] / m__; \ y__ = (clut)->green[jj__] / m__; \ x__ = libclut_model_standard_to_linear1(x__); \ y__ = libclut_model_standard_to_linear1(y__); \ g__ = x__ * (1 - w__) + y__ * w__; \ \ b__ = (M)[2][0] * r__ + (M)[2][1] * g__ + (M)[2][2] * b__; \ b__ = libclut_model_linear_to_standard1(b__); \ b__ *= m__; \ if (trunc) \ { \ if (b__ < 0) \ b__ = 0; \ else if (b__ > m__) \ b__ = m__; \ } \ (out)->blue[i__] = (type)b__; \ } \ } \ while (0) /** * Apply gamma correction on the colour curves. * * None of the parameter may have side-effects. * * Requires linking with '-lm'. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r The gamma parameter the red colour curve. * @param g The gamma parameter the green colour curve. * @param b The gamma parameter the blue colour curve. */ #define libclut_gamma(clut, max, type, r, g, b) \ do \ { \ double m__ = (double)(max); \ if (!libclut_1__(r)) \ libclut__(clut, red, type, m__ * pow(LIBCLUT_VALUE / m__, 1 / (double)(r))); \ if (!libclut_1__(g)) \ libclut__(clut, green, type, m__ * pow(LIBCLUT_VALUE / m__, 1 / (double)(g))); \ if (!libclut_1__(b)) \ libclut__(clut, blue, type, m__ * pow(LIBCLUT_VALUE / m__, 1 / (double)(b))); \ } \ while (0) /** * Reverse the colour curves (negative image with gamma preservation.) * * None of the parameter may have side-effects. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * This parameter is not used, it is just a dummy, to unify * the API with the other functions. * @param type The data type used for each stop in the ramps. * @param r Whether to invert the red colour curve. * @param g Whether to invert the green colour curve. * @param b Whether to invert the blue colour curve. */ #define libclut_negative(clut, max, type, r, g, b) \ do \ { \ size_t i__, n__; \ type t__; \ if (r) \ for (i__ = 0, n__ = (clut)->red_size; i__ < (n__ >> 1); i__++) \ { \ t__ = (clut)->red[i__]; \ (clut)->red[i__] = (clut)->red[n__ - i__ - 1]; \ (clut)->red[n__ - i__ - 1] = t__; \ } \ if (g) \ for (i__ = 0, n__ = (clut)->green_size; i__ < (n__ >> 1); i__++) \ { \ t__ = (clut)->green[i__]; \ (clut)->green[i__] = (clut)->green[n__ - i__ - 1]; \ (clut)->green[n__ - i__ - 1] = t__; \ } \ if (b) \ for (i__ = 0, n__ = (clut)->blue_size; i__ < (n__ >> 1); i__++) \ { \ t__ = (clut)->blue[i__]; \ (clut)->blue[i__] = (clut)->blue[n__ - i__ - 1]; \ (clut)->blue[n__ - i__ - 1] = t__; \ } \ } \ while (0) /** * Invert the colour curves (negative image with gamma invertion), using sRGB. * * None of the parameter may have side-effects. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r Whether to invert the red colour curve. * @param g Whether to invert the green colour curve. * @param b Whether to invert the blue colour curve. */ #define libclut_rgb_invert(clut, max, type, r, g, b) \ do \ { \ if (r) libclut__(clut, red, type, (max) - LIBCLUT_VALUE); \ if (g) libclut__(clut, green, type, (max) - LIBCLUT_VALUE); \ if (b) libclut__(clut, blue, type, (max) - LIBCLUT_VALUE); \ } \ while (0) /** * Invert the colour curves (negative image with gamma invertion), using CIE xyY. * * None of the parameter may have side-effects. * * Requires linking with '-lclut'. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r Whether to invert the red colour curve. * @param g Whether to invert the green colour curve. * @param b Whether to invert the blue colour curve. */ #define libclut_cie_invert(clut, max, type, r, g, b) \ libclut_cie__(clut, max, type, (r) && (g) && (b), r, g, b, 1 - Y__, 1 - Y__, 1 - Y__) /** * Apply S-curve correction on the colour curves. * This is intended for fine tuning LCD monitors, * 4.5 is good value start start testing at. * You would probably like to use rgb_limits before * this to adjust the blackpoint as that is the * only way to adjust the blackpoint on many LCD * monitors. * * None of the parameter may have side-effects. * * Requires linking with '-lm'. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param rp Pointer to the sigmoid parameter for the red curve. `NULL` for no adjustment. * @param gp Pointer to the sigmoid parameter for the green curve. `NULL` for no adjustment. * @param bp Pointer to the sigmoid parameter for the blue curve. `NULL` for no adjustment. */ #define libclut_sigmoid(clut, max, type, rp, gp, bp) \ do \ { \ double *gcc_6_1_1_workaround, m__ = (double)(max); \ const double h__ = (double)5 / 10; \ gcc_6_1_1_workaround = rp; \ if (gcc_6_1_1_workaround) \ libclut_sigmoid__(clut, max, type, red); \ gcc_6_1_1_workaround = gp; \ if (gcc_6_1_1_workaround) \ libclut_sigmoid__(clut, max, type, green); \ gcc_6_1_1_workaround = bp; \ if (gcc_6_1_1_workaround) \ libclut_sigmoid__(clut, max, type, blue); \ } \ while (0) /** * Apply S-curve correction on the colour curves. * This is intended for fine tuning LCD monitors, * 4.5 is good value start start testing at. * You would probably like to use rgb_limits before * this to adjust the blackpoint as that is the * only way to adjust the blackpoint on many LCD * monitors. * * None of the parameter may have side-effects. * * Requires linking with '-lm'. * * Intended for internal use. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param channel The channel, must be either "red", "green", or "blue". */ #define libclut_sigmoid__(clut, max, type, channel) \ do \ { \ double s__ = *gcc_6_1_1_workaround, l__; \ size_t i__; \ for (i__ = 0; i__ < (clut)->channel##_size; i__++) \ { \ l__ = log(m__ / (clut)->channel[i__] - 1); \ if (isnan(l__) || isinf(l__)) \ l__ = 37.024483 * (isinf(l__) > 0 ? +1 : -1); \ (clut)->channel[i__] = (type)(m__ * (h__ - l__ / s__)); \ } \ } \ while (0) /** * Changes the blackpoint and the whitepoint, using sRGB. * * None of the parameter may have side-effects. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param rmin The red component value of the blackpoint. * @param rmax The red component value of the whitepoint. * @param gmin The green component value of the blackpoint. * @param gmax The green component value of the whitepoint. * @param bmin The blue component value of the blackpoint. * @param bmax The blue component value of the whitepoint. */ #define libclut_rgb_limits(clut, max, type, rmin, rmax, gmin, gmax, bmin, bmax) \ do \ { \ double diff__; \ if (!libclut_0__(rmin) || !libclut_1__(rmax)) \ { \ diff__ = (double)(rmax) - (double)(rmin); \ libclut__(clut, red, type, LIBCLUT_VALUE / (double)(max) * diff__ + (rmin)); \ } \ if (!libclut_0__(gmin) || !libclut_1__(gmax)) \ { \ diff__ = (double)(gmax) - (double)(gmin); \ libclut__(clut, green, type, LIBCLUT_VALUE / (double)(max) * diff__ + (gmin)); \ } \ if (!libclut_0__(bmin) || !libclut_1__(bmax)) \ { \ diff__ = (double)(bmax) - (double)(bmin); \ libclut__(clut, blue, type, LIBCLUT_VALUE / (double)(max) * diff__ + (bmin)); \ } \ } \ while (0) /** * Changes the blackpoint and the whitepoint, using CIE xyY. * * None of the parameter may have side-effects. * * Requires linking with '-lclut'. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param rmin The red component value of the blackpoint. * @param rmax The red component value of the whitepoint. * @param gmin The green component value of the blackpoint. * @param gmax The green component value of the whitepoint. * @param bmin The blue component value of the blackpoint. * @param bmax The blue component value of the whitepoint. */ #define libclut_cie_limits(clut, max, type, rmin, rmax, gmin, gmax, bmin, bmax) \ do \ { \ double rd__ = (rmax) - (rmin), gd__ = (gmax) - (gmin), bd__ = (bmax) - (bmin); \ libclut_cie__(clut, max, type, \ libclut_eq__((rmin), (gmin)) && libclut_eq__((gmin), (bmin)) && \ libclut_eq__((rmax), (gmax)) && libclut_eq__((gmax), (bmax)), \ !libclut_0__(rmin) || !libclut_1__(rmax), \ !libclut_0__(gmin) || !libclut_1__(gmax), \ !libclut_0__(bmin) || !libclut_1__(bmax), \ Y__ * rd__ + (rmin), Y__ * gd__ + (gmin), Y__ * bd__ + (bmin)); \ } \ while (0) /** * Manipulate the colour curves using a function on the sRGB colour space. * * None of the parameter may have side-effects. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r Function to manipulate the red colour curve, should either * be `NULL` or map a [0, 1] `double` to a [0, 1] `double`. * @param g Function to manipulate the green colour curve, should either * be `NULL` or map a [0, 1] `double` to a [0, 1] `double`. * @param b Function to manipulate the blue colour curve, should either * be `NULL` or map a [0, 1] `double` to a [0, 1] `double`. */ #define libclut_manipulate(clut, max, type, r, g, b) \ do \ { \ double m__ = (double)(max); \ double (*gcc_6_1_1_workaround__)(double); \ gcc_6_1_1_workaround__ = r; \ if (gcc_6_1_1_workaround__) \ libclut__(clut, red, type, m__ * (gcc_6_1_1_workaround__)(LIBCLUT_VALUE / m__)); \ gcc_6_1_1_workaround__ = g; \ if (gcc_6_1_1_workaround__) \ libclut__(clut, green, type, m__ * (gcc_6_1_1_workaround__)(LIBCLUT_VALUE / m__)); \ gcc_6_1_1_workaround__ = b; \ if (gcc_6_1_1_workaround__) \ libclut__(clut, blue, type, m__ * (gcc_6_1_1_workaround__)(LIBCLUT_VALUE / m__)); \ } \ while (0) /** * Manipulate the colour curves using a function on the CIE xyY colour space. * * None of the parameter may have side-effects. * * Requires linking with '-lclut'. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r Function to manipulate the red colour curve, should either * be `NULL` or map a [0, 1] `double` to a [0, 1] `double`. * @param g Function to manipulate the green colour curve, should either * be `NULL` or map a [0, 1] `double` to a [0, 1] `double`. * @param b Function to manipulate the blue colour curve, should either * be `NULL` or map a [0, 1] `double` to a [0, 1] `double`. */ #define libclut_cie_manipulate(clut, max, type, r, g, b) \ libclut_cie__(clut, max, type, (r) && (g) && (b), r, g, b, (r)(Y__), (g)(Y__), (b)(Y__)) /** * Resets colour curvers to linear mappings. * (Identity mapping if imaginged to map from [0, 1] to [0, 1].) * * None of the parameter may have side-effects. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r Whether to reset the red colour curve. * @param g Whether to reset the green colour curve. * @param b Whether to reset the blue colour curve. */ #define libclut_start_over(clut, max, type, r, g, b) \ do \ { \ size_t i__; \ double m__, max__ = (double)(max); \ if (r) \ { \ m__ = (double)((clut)->red_size - 1); \ for (i__ = 0; i__ < (clut)->red_size; i__++) \ (clut)->red[i__] = (type)(((double)i__ / m__) * max__); \ } \ if (g) \ { \ m__ = (double)((clut)->green_size - 1); \ for (i__ = 0; i__ < (clut)->green_size; i__++) \ (clut)->green[i__] = (type)(((double)i__ / m__) * max__); \ } \ if (b) \ { \ m__ = (double)((clut)->blue_size - 1); \ for (i__ = 0; i__ < (clut)->blue_size; i__++) \ (clut)->blue[i__] = (type)(((double)i__ / m__) * max__); \ } \ } \ while (0) /** * Clip colour curves to only map to values between the minimum and maximum. * This should be done, before apply the curves, and before applying changes * with limited domain. * * Values below 0 are set to 0, and values above `max` are set to `max`. * * None of the parameter may have side-effects. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param r Whether to clip the red colour curve. * @param g Whether to clip the green colour curve. * @param b Whether to clip the blue colour curve. */ #define libclut_clip(clut, max, type, r, g, b) \ do \ { \ if (r) libclut__(clut, red, type, libclut_clip__(0, LIBCLUT_VALUE, max)); \ if (g) libclut__(clut, green, type, libclut_clip__(0, LIBCLUT_VALUE, max)); \ if (b) libclut__(clut, blue, type, libclut_clip__(0, LIBCLUT_VALUE, max)); \ } \ while (0) /** * Truncates a value to fit a boundary. * * None of the parameter may have side-effects. * * Intended for internal use. * * @param min The minimum allowed value. * @param val The current value. * @param max The maximum allowed value. * @return The value truncated into its boundary. */ #define libclut_clip__(min, val, max) \ (LIBCLUT_VALUE < (min) ? (min) : LIBCLUT_VALUE > (max) ? (max) : LIBCLUT_VALUE) /** * Emulates low colour resolution. * * None of the parameter may have side-effects. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param rx The desired emulated red encoding resolution, 0 for unchanged. * @param ry The desired emulated red output resolution, 0 for unchanged. * @param gx The desired emulated green encoding resolution, 0 for unchanged. * @param gy The desired emulated green output resolution, 0 for unchanged. * @param bx The desired emulated blue encoding resolution, 0 for unchanged. * @param by The desired emulated blue output resolution, 0 for unchanged. */ #define libclut_lower_resolution(clut, max, type, rx, ry, gx, gy, bx, by) \ do \ { \ libclut_lower_resolution__(clut, red, max, type, rx, ry); \ libclut_lower_resolution__(clut, green, max, type, gx, gy); \ libclut_lower_resolution__(clut, blue, max, type, bx, by); \ } \ while (0) /** * Emulates low colour resolution of a channel. * * None of the parameter may have side-effects. * * Intended for internal use. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param channel The channel, must be either "red", "green", or "blue". * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param x The desired emulated encoding resolution, 0 for unchanged. * @param y The desired emulated output resolution, 0 for unchanged. */ #define libclut_lower_resolution__(clut, channel, max, type, x, y) \ do \ if ((x) || (y)) \ { \ size_t x__, y__, i__, n__ = (clut)->channel##_size; \ double xm__ = (double)((x) - 1), ym__ = (double)((y) - 1); \ double m__ = (double)(max), nm__ = (double)(n__ - 1); \ type c__[n__]; /* Do not use alloca! */ \ const double h__ = (double)5 / 10; \ for (i__ = 0; i__ < n__; i__++) \ { \ if ((x__ = i__), (x)) \ { \ x__ = (size_t)((double)i__ * (double)(x) / (double)n__); \ x__ = (size_t)((double)x__ * nm__ / xm__); \ } \ if (!(y)) \ c__[i__] = (clut)->channel[x__]; \ else \ { \ y__ = (size_t)((double)((clut)->channel[x__]) / (max) * ym__ + h__); \ c__[i__] = (type)((double)y__ / ym__ * m__); \ } \ } \ memcpy((clut)->channel, c__, n__ * sizeof(type)); \ } \ while (0) /** * Translates a gamma ramp structure to another gamma ramp structure type. * * None of the parameter may have side-effects. * * @param dclut Pointer to the desired gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars `red_size`, * `green_size`, and `blue_size`. Ramp structures from * libgamma or libcoopgamma can be used. * @param dmax The maximum value on each stop in the ramps in `dclut`. * @param dtype The data type used for each stop in the ramps in `dclut`. * @param sclut Pointer to the set gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars `red_size`, * `green_size`, and `blue_size`. Ramp structures from * libgamma or libcoopgamma can be used. * @param smax The maximum value on each stop in the ramps in `sclut`. * @param stype The data type used for each stop in the ramps in `sclut`. * (Not actually used.) */ #define libclut_translate(dclut, dmax, dtype, sclut, smax, stype) \ do \ { \ libclut_translate__(dclut, dmax, dtype, sclut, smax, stype, red); \ libclut_translate__(dclut, dmax, dtype, sclut, smax, stype, green); \ libclut_translate__(dclut, dmax, dtype, sclut, smax, stype, blue); \ } \ while (0) /** * Translates a gamma ramp structure to another gamma ramp structure type. * * None of the parameter may have side-effects. * * This is intended for internal use. * * @param dclut Pointer to the desired gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars `red_size`, * `green_size`, and `blue_size`. Ramp structures from * libgamma or libcoopgamma can be used. * @param dmax The maximum value on each stop in the ramps in `dclut`. * @param dtype The data type used for each stop in the ramps in `dclut`. * @param sclut Pointer to the set gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars `red_size`, * `green_size`, and `blue_size`. Ramp structures from * libgamma or libcoopgamma can be used. * @param smax The maximum value on each stop in the ramps in `sclut`. * @param stype The data type used for each stop in the ramps in `sclut`. * (Not actually used.) * @param channel The channel, must be either "red", "green", or "blue". */ #define libclut_translate__(dclut, dmax, dtype, sclut, smax, stype, channel) \ do \ { \ size_t di__, si__, sj__; \ size_t dn__ = (dclut)->channel##_size; \ size_t sn__ = (sclut)->channel##_size; \ double dm__ = (double)(dmax); \ double sm__ = (double)(smax); \ double dmsm__ = dm__ / sm__; \ double x__, y__; \ if (dn__ == sn__) \ for (di__ = 0; di__ < dn__; di__++) \ { \ y__ = (double)((sclut)->channel[di__]) * dmsm__; \ (dclut)->channel[di__] = (dtype)y__; \ } \ else \ for (di__ = 0; di__ < dn__; di__++) \ { \ x__ = di__ / (dn__ - 1) * (sn__ - 1); \ si__ = (size_t)(x__); \ sj__ = si__ + (si__ != sn__); \ x__ -= (double)si__; \ y__ = (double)((sclut)->channel[si__]) * (1 - x__); \ y__ += (double)((sclut)->channel[sj__]) * (x__); \ y__ *= dmsm__; \ (dclut)->channel[di__] = (dtype)y__; \ } \ } \ while (0) /** * Applies a filter or calibration. * * None of the parameter may have side-effects. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param filter Same as `clut`, but for the filter to apply. * @param fmax Same as `max`, but for the filter to apply. * @param ftype Same as `type`, but for the filter to apply. (Not actually used). * @param r Whether to apply the filter for the red curve. * @param g Whether to apply the filter for the green curve. * @param b Whether to apply the filter for the blue curve. */ #define libclut_apply(clut, max, type, filter, fmax, ftype, r, g, b) \ do \ { \ if (r) libclut_apply__(clut, max, type, filter, fmax, ftype, red); \ if (g) libclut_apply__(clut, max, type, filter, fmax, ftype, green); \ if (b) libclut_apply__(clut, max, type, filter, fmax, ftype, blue); \ } \ while (0) /** * Applies a filter or calibration for one channel. * * None of the parameter may have side-effects. * * Intended for internal use. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param filter Same as `clut`, but for the filter to apply. * @param fmax Same as `max`, but for the filter to apply. * @param ftype Same as `type`, but for the filter to apply. (Not actually used). * @param channel The channel, must be either "red", "green", or "blue". */ #define libclut_apply__(clut, max, type, filter, fmax, ftype, channel) \ do \ { \ size_t i__, rn__ = (clut)->channel##_size, fn__ = (filter)->channel##_size - 1; \ double x__, rm__ = (double)(max), m__ = (double)(max) / (double)(fmax); \ for (i__ = 0; i__ < rn__; i__++) \ { \ x__ = (double)((clut)->channel[i__]) / rm__ * (double)fn__; \ (clut)->channel[i__] = (type)((double)((filter)->channel[(size_t)x__]) * m__); \ } \ } \ while (0) /** * Applies a filter or calibration, using CIE xyY. * * None of the parameter may have side-effects. * * Requires linking with '-lclut'. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param filter Same as `clut`, but for the filter to apply. * @param fmax Same as `max`, but for the filter to apply. * @param ftype Same as `type`, but for the filter to apply. (Not actually used). * @param r Whether to apply the filter for the red curve. * @param g Whether to apply the filter for the green curve. * @param b Whether to apply the filter for the blue curve. */ #define libclut_cie_apply(clut, max, type, filter, fmax, ftype, r, g, b) \ do \ { \ size_t rfn__ = (filter)->red_size - 1, gfn__ = (filter)->green_size - 1; \ size_t bfn__ = (filter)->blue_size - 1, x__; \ size_t rm__ = (double)(max), fm__ = (double)(fmax); \ libclut_cie__(clut, max, type, 0, r, g, b, \ (x__ = (size_t)(Y__ / rm__ * rfn__), (double)((filter)->red[x__]) / fm__), \ (x__ = (size_t)(Y__ / rm__ * gfn__), (double)((filter)->green[x__]) / fm__), \ (x__ = (size_t)(Y__ / rm__ * bfn__), (double)((filter)->blue[x__]) / fm__)); \ } \ while (0) /** * Modify a ramp. * * None of the parameter may have side-effects. * * This is intended for internal use. * * @param clut Pointer to the gamma ramps, must have and array * named `channel` and a scalar named `channel` followed * by "_size". * @param channel The channel, must be either "red", "green", or "blue". * @param type The data type used for each stop in the ramps. * @param expr Expression that evalutes the value a stop should have. * It can use the variable `LIBCLUT_VALUE` to get the * current value of the stop. */ #define libclut__(clut, channel, type, expr) \ do \ { \ size_t i__, n__ = (clut)->channel##_size; \ type LIBCLUT_VALUE; \ for (i__ = 0; i__ < n__; i__++) \ { \ LIBCLUT_VALUE = (clut)->channel[i__]; \ (clut)->channel[i__] = (type)(expr); \ } \ } \ while (0) /** * Modify a ramp set in CIE xyY. * * None of the parameter may have side-effects. * * Requires linking with '-lclut'. * * This is intended for internal use. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param utest Whether all channels can be modified at the same time. * This test does not have to include the ramp size. * @param rtest Whether the red channel have to be modified. * @param gtest Whether the green channel have to be modified. * @param btest Whether the blue channel have to be modified. * @param rexpr Expression calculating the intensity of the red channel. * The current value is stored in `Y__`. * @param gexpr Expression calculating the intensity of the green channel. * The current value is stored in `Y__`. * @param bexpr Expression calculating the intensity of the blue channel. * The current value is stored in `Y__`. */ #define libclut_cie__(clut, max, type, utest, rtest, gtest, btest, rexpr, gexpr, bexpr) \ do \ { \ size_t rn__ = (clut)->red_size; \ size_t gn__ = (clut)->green_size; \ size_t bn__ = (clut)->blue_size; \ size_t i__; \ double x__, y__, Y__, r__, g__, b__; \ double m__ = (double)(max); \ type* rs__ = (clut)->red; \ type* gs__ = (clut)->green; \ type* bs__ = (clut)->blue; \ if ((rn__ == gn__) && (gn__ == bn__) && (utest)) \ { \ if (!(rtest)) \ break; \ for (i__ = 0; i__ < rn__; i__++) \ { \ libclut_model_srgb_to_ciexyy(rs__[i__] / m__, gs__[i__] / m__, \ bs__[i__] / m__, &x__, &y__, &Y__); \ libclut_model_ciexyy_to_srgb(x__, y__, rexpr, &r__, &g__, &b__); \ rs__[i__] = (type)(r__ * m__); \ gs__[i__] = (type)(g__ * m__); \ bs__[i__] = (type)(b__ * m__); \ } \ } \ else if ((rn__ == gn__) && (gn__ == bn__)) \ { \ if (!(rtest) && !(gtest) && !(btest)) \ break; \ for (i__ = 0; i__ < rn__; i__++) \ { \ libclut_model_srgb_to_ciexyy(rs__[i__] / m__, gs__[i__] / m__, \ bs__[i__] / m__, &x__, &y__, &Y__); \ if (rtest) \ { \ libclut_model_ciexyy_to_srgb(x__, y__, rexpr, &r__, &g__, &b__); \ rs__[i__] = (type)(r__ * m__); \ } \ if (gtest) \ { \ libclut_model_ciexyy_to_srgb(x__, y__, gexpr, &r__, &g__, &b__); \ gs__[i__] = (type)(g__ * m__); \ } \ if (btest) \ { \ libclut_model_ciexyy_to_srgb(x__, y__, bexpr, &r__, &g__, &b__); \ bs__[i__] = (type)(b__ * m__); \ } \ } \ } \ else \ { \ if (rtest) \ for (i__ = 0; i__ < rn__; i__++) \ libclut_cie___(clut, max, type, r, rexpr, i__, \ libclut_i__(i__, rn__, gn__), \ libclut_i__(i__, rn__, bn__)); \ if (gtest) \ for (i__ = 0; i__ < rn__; i__++) \ libclut_cie___(clut, max, type, g, gexpr, \ libclut_i__(i__, gn__, rn__), i__, \ libclut_i__(i__, gn__, bn__)); \ if (btest) \ for (i__ = 0; i__ < rn__; i__++) \ libclut_cie___(clut, max, type, b, bexpr, \ libclut_i__(i__, bn__, rn__), \ libclut_i__(i__, bn__, gn__), i__); \ } \ } \ while (0) /** * Modify a ramp stop in CIE xyY. * * None of the parameter may have side-effects. * * Requires linking with '-lclut'. * * This is intended for internal use. * Assumes the existence of variables defined in `libclut_cie__`. * * @param clut Pointer to the gamma ramps, must have the arrays * `red`, `green`, and `blue`, and the scalars * `red_size`, `green_size`, and `blue_size`. Ramp * structures from libgamma or libcoopgamma can be used. * @param max The maximum value on each stop in the ramps. * @param type The data type used for each stop in the ramps. * @param c Either "r" for red, "g" for green, or "b" for blue. * @param expr Expression calculating the intensity of the channel. * @param ri The index of the stop translated to the red channel. * @param gi The index of the stop translated to the green channel. * @param bi The index of the stop translated to the blue channel. */ #define libclut_cie___(clut, max, type, c, expr, ri, gi, bi) \ do \ { \ for (i__ = 0; i__ < c##n__; i__++) \ { \ libclut_model_srgb_to_ciexyy(rs__[(ri)] / m__, gs__[(gi)] / m__, \ bs__[(bi)] / m__, &x__, &y__, &Y__); \ libclut_model_ciexyy_to_srgb(x__, y__, expr, &r__, &g__, &b__); \ c##s__[i__] = (type)(c##__ * m__); \ } \ } \ while (0) /** * Translate an index from one channel to another. * * @param i The index in the input channel. * @param in The size of the input channel. * @param out The size of the output channel. * @return The index in the output channel. */ #define libclut_i__(i, in, out) \ (size_t)((double)(i) * (double)(out) / (double)(in)) #if defined(__GNUC__) && !defined(__clang__) # define LIBCLUT_GCC_ONLY__(x) x #else # define LIBCLUT_GCC_ONLY__(x) /* do nothing */ #endif /** * Convert one component from [0, 1] linear sRGB to [0, 1] sRGB. * * If the macro variant is used, the argument must not have * any side-effects. The macro variant requires linking with * '-lm'. * * @param c The linear sRGB value. * @return Corresponding sRGB value. */ LIBCLUT_GCC_ONLY__(__attribute__((__const__, __leaf__))) double (libclut_model_linear_to_standard1)(double); #define libclut_model_linear_to_standard1(c) \ (((double)(c) <= 0.0031308) ? (12.92 * (double)(c)) : ((1.055) * pow((double)(c), 1 / 2.4) - 0.055)) /** * Convert [0, 1] linear sRGB to [0, 1] sRGB. * * The macro variant requires linking with '-lm', * if the 'libclut_model_linear_to_standard1' is defined, * otherwise it requires linking with '-lclut'. * * @param r Pointer to the linear red component, * and output parameter for the red component. * @param g Pointer to the linear green component, * and output parameter for the green component. * @param b Pointer to the linear blue component, * and output parameter for the blue component. */ void (libclut_model_linear_to_standard)(double*, double*, double*); #define libclut_model_linear_to_standard(r, g, b) \ do \ { \ double *r__ = (r), *g__ = (g), *b__ = (b); \ *r__ = libclut_model_linear_to_standard1(*r__); \ *g__ = libclut_model_linear_to_standard1(*g__); \ *b__ = libclut_model_linear_to_standard1(*b__); \ } \ while (0) /** * Convert one component from [0, 1] sRGB to [0, 1] linear sRGB. * * If the macro variant is used, the argument must not have * any side-effects. The macro variant requires linking with * '-lm'. * * @param c The sRGB value. * @return Corresponding linear sRGB value. */ LIBCLUT_GCC_ONLY__(__attribute__((__const__, __leaf__))) double (libclut_model_standard_to_linear1)(double); #define libclut_model_standard_to_linear1(c) \ (((double)(c) <= 0.04045) ? ((double)(c) / 12.92) : pow(((double)(c) + 0.055) / 1.055, 2.4)) /** * Convert [0, 1] sRGB to [0, 1] linear sRGB. * * The macro variant requires linking with '-lm', * if the 'libclut_model_standard_to_linear1' is defined, * otherwise it requires linking with '-lclut'. * * @param r Pointer to the red component, and output * parameter for the linear red component. * @param g Pointer to the green component, and output * parameter for the linear green component. * @param b Pointer to the blue component, and output * parameter for the linear blue component. */ void (libclut_model_standard_to_linear)(double*, double*, double*); #define libclut_model_standard_to_linear(r, g, b) \ do \ { \ double *r__ = (r), *g__ = (g), *b__ = (b); \ *r__ = libclut_model_standard_to_linear1(*r__); \ *g__ = libclut_model_standard_to_linear1(*g__); \ *b__ = libclut_model_standard_to_linear1(*b__); \ } \ while (0) /** * Convert CIE xyY to CIE XYZ. * * @param x The x parameter. * @param y The y parameter. * @param Y The Y parameter. This is also the Y (middle) parameter for the CIE XYZ colour. * @param X Output parameter for the X parameter. * @param Z Output parameter for the Z parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_ciexyy_to_ciexyz)(double, double, double, double*, double*); #define libclut_model_ciexyy_to_ciexyz(x, y, Y, X, Z) \ do \ { \ double x__ = (x), y__ = (y), Y__ = (Y), *X__ = (X), *Z__ = (Z); \ *X__ = libclut_0__(y__) ? Y__ : (Y__ * x__ / y__); \ *Z__ = libclut_0__(y__) ? Y__ : (Y__ * (1 - x__ - y__) / y__); \ } \ while (0) /** * Convert CIE XYZ to CIE xyY. * * @param X The X parameter. * @param Y The Y parameter. This is also the Y (last) parameter for the CIE xyY colour. * @param Z The Z parameter. * @param x Output parameter for the x parameter. * @param y Output parameter for the y parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_ciexyz_to_ciexyy)(double, double, double, double*, double*); #define libclut_model_ciexyz_to_ciexyy(X, Y, Z, x, y) \ do \ { \ double X__ = (X), Y__ = (Y), Z__ = (Z), *x__ = (x), *y__ = (y); \ double s__ = X__ + Y__ + Z__; \ if (libclut_0__(s__)) \ *x__ = *y__ = 0; \ else \ *x__ = X__ / s__, *y__ = Y__ / s__; \ } \ while (0) /** * Convert CIE XYZ to [0, 1] linear sRGB. * * @param X The X parameter. * @param Y The Y parameter. * @param Z The Z parameter. * @param r Output parameter for the red component. * @param g Output parameter for the green component. * @param b Output parameter for the blue component. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_ciexyz_to_linear)(double, double, double, double*, double*, double*); #define libclut_model_ciexyz_to_linear(X, Y, Z, r, g, b) \ do \ { \ double X__ = (X), Y__ = (Y), Z__ = (Z); \ *(r) = ( 3.2404500 * X__) + (-1.537140 * Y__) + (-0.4985320 * Z__); \ *(g) = (-0.9692660 * X__) + ( 1.876010 * Y__) + ( 0.0415561 * Z__); \ *(b) = ( 0.0556434 * X__) + (-0.204026 * Y__) + ( 1.0572300 * Z__); \ } \ while (0) /** * Convert [0, 1] linear sRGB to CIE XYZ. * * @param r The red component. * @param g The green component. * @param b The blue component. * @param X Output parameter for the X parameter. * @param Y Output parameter for the Y parameter. * @param Z Output parameter for the Z parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_linear_to_ciexyz)(double, double, double, double*, double*, double*); #define libclut_model_linear_to_ciexyz(r, g, b, X, Y, Z) \ do \ { \ double r__ = (r), g__ = (g), b__ = (b); \ *(X) = (0.4124564 * r__) + (0.3575761 * g__) + (0.1804375 * b__); \ *(Y) = (0.2126729 * r__) + (0.7151522 * g__) + (0.0721750 * b__); \ *(Z) = (0.0193339 * r__) + (0.1191920 * g__) + (0.9503041 * b__); \ } \ while (0) /** * Convert [0, 1] sRGB to CIE xyY. * * The macro variant requires linking with '-lclut' * if any of `libclut_model_ciexyz_to_ciexyy`, * `libclut_model_linear_to_ciexyz`, and * `libclut_model_standard_to_linear` are undefined. * The macro variant requires linking with '-lm' if * neither `libclut_model_standard_to_linear` nor * `libclut_model_standard_to_linear1` are undefined. * * @param r The red component. * @param g The green component. * @param b The blue component. * @param x Output parameter for the x parameter. * @param y Output parameter for the y parameter. * @param Y Output parameter for the Y parameter. */ void (libclut_model_srgb_to_ciexyy)(double, double, double, double*, double*, double*); #define libclut_model_srgb_to_ciexyy(r, g, b, x, y, Y) \ do \ { \ double r___ = (r), g___ = (g), b___ = (b); \ double *x___ = (x), *y___ = (y), *Y___ = (Y); \ double X___, Z___; \ libclut_model_standard_to_linear(&r___, &g___, &b___); \ libclut_model_linear_to_ciexyz(r___, g___, b___, &X___, Y___, &Z___); \ libclut_model_ciexyz_to_ciexyy(X___, *Y___, Z___, x___, y___); \ } \ while (0) /** * Convert CIE xyY to [0, 1] sRGB. * * The macro variant requires linking with '-lclut' * if any of `libclut_model_ciexyy_to_ciexyz`, * `libclut_model_ciexyz_to_linear`, and * `libclut_model_linear_to_standard` are undefined. * The macro variant requires linking with '-lm' if * neither `libclut_model_linear_to_standard` nor * `libclut_model_linear_to_standard1` are undefined. * * @param x The x parameter. * @param y The y parameter. * @param Y The Y parameter. * @param r Output parameter for the red component. * @param g Output parameter for the green component. * @param b Output parameter for the blue component. */ void (libclut_model_ciexyy_to_srgb)(double, double, double, double*, double*, double*); #define libclut_model_ciexyy_to_srgb(x, y, Y, r, g, b) \ do \ { \ double x___ = (x), y___ = (y), Y___ = (Y); \ double *r___ = (r), *g___ = (g), *b___ = (b); \ double X___, Z___; \ libclut_model_ciexyy_to_ciexyz(x___, y___, Y___, &X___, &Z___); \ libclut_model_ciexyz_to_linear(X___, Y___, Z___, r___, g___, b___); \ libclut_model_linear_to_standard(r___, g___, b___); \ } \ while(0) /** * Convert from CIE XYZ to CIE L*a*b*. * * The macro variant requires linking with '-lm'. * * @param X The X parameter. * @param Y The Y parameter. * @param Z The Z parameter. * @param L Output parameter for the L* component. * @param a Output parameter for the a* component. * @param b Output parameter for the b* component. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_ciexyz_to_cielab)(double, double, double, double*, double*, double*); #define libclut_model_ciexyz_to_cielab(X, Y, Z, L, a, b) \ do \ { \ double X__ = (X), Y__ = (Y), Z__ = (Z); \ X__ /= 0.95047, Z__ /= 1.08883; \ X__ = LIBCLUT_MODEL_CIEXYZ_TO_CIELAB__(X__); \ Y__ = LIBCLUT_MODEL_CIEXYZ_TO_CIELAB__(Y__); \ Z__ = LIBCLUT_MODEL_CIEXYZ_TO_CIELAB__(Z__); \ *(L) = 116 * Y__ - 16; \ *(a) = 500 * (X__ - Y__); \ *(b) = 200 * (Y__ - Z__); \ } \ while (0) #define LIBCLUT_MODEL_CIEXYZ_TO_CIELAB__(C) \ (((C) > 0.00885642) ? pow((C), 1.0 / 3) : ((7.78 + 703.0 / 99900) * (C) + 0.1379310)) /** * Convert from CIE L*a*b* to CIE XYZ. * * @param L The L* component. * @param a The a* component. * @param b The b* component. * @param X Output parameter for the X parameter. * @param Y Output parameter for the Y parameter. * @param Z Output parameter for the Z parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_cielab_to_ciexyz)(double, double, double, double*, double*, double*); #define libclut_model_cielab_to_ciexyz(L, a, b, X, Y, Z) \ do \ { \ double L__ = (L), a__ = (a), b__ = (b); \ double *X__ = (X), *Y__ = (Y), *Z__ = (Z); \ *Y__ = (L__ + 16) / 116; \ *X__ = a__ / 500 + *Y__; \ *Z__ = *Y__ - b__ / 200; \ *X__ = LIBCLUT_MODEL_CIELAB_TO_CIEXYZ__(*X__) * 0.95047; \ *Y__ = LIBCLUT_MODEL_CIELAB_TO_CIEXYZ__(*Y__); \ *Z__ = LIBCLUT_MODEL_CIELAB_TO_CIEXYZ__(*Z__) * 1.08883; \ } \ while (0) #define LIBCLUT_MODEL_CIELAB_TO_CIEXYZ__(C) \ (((C)*(C)*(C) > 0.00885642) ? ((C)*(C)*(C)) : (((C) - 0.1379310) / (7.78 + 703.0 / 99900))) /** * Convert from CIE XYZ to CIELUV. * * Requires linking with `-lm`. * * @param X The X component. * @param Y The Y component. * @param Z The Z component. * @param Xn The X component of the specified white object (white point). * @param Yn The Y component of the specified white object (white point). * @param Zn The Z component of the specified white object (white point). * @param L Output parameter for the L* parameter. * @param u Output parameter for the u* parameter. * @param v Output parameter for the v* parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_ciexyz_to_cieluv)(double, double, double, double, double, double, double*, double*, double*); #define libclut_model_ciexyz_to_cieluv(X, Y, Z, Xn, Yn, Zn, L, u, v) \ do \ { \ double x__ = (Xn), y__ = (Yn); \ double t__ = x__ + 15 * y__ + 3 * (Zn); \ double u__ = 4 * x__ / t__; \ double v__ = 9 * y__ / t__; \ x__ = (X), y__ = (Y); \ t__ = x__ + 15 * y__ + 3 * (Z); \ u__ = 4 * x__ / t__ - u__; \ v__ = 9 * y__ / t__ - v__; \ y__ = (Y) / y__; \ if (y__ * 24389 <= (double)216) \ y__ *= 24389, y__ /= 27; \ else \ y__ = cbrt(y__) * 116 - 16; \ *(L) = y__; \ y__ *= 13; \ *(u) = y__ * u__; \ *(v) = y__ * v__; \ } \ while (0) /** * Convert from CIELUV to CIE XYZ. * * @param L The L* component. * @param u The u* component. * @param v The v* component. * @param Xn The X component of the specified white object (white point). * @param Yn The Y component of the specified white object (white point). * @param Zn The Z component of the specified white object (white point). * @param X Output parameter for the X parameter. * @param Y Output parameter for the Y parameter. * @param Z Output parameter for the Z parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_cieluv_to_ciexyz)(double, double, double, double, double, double, double*, double*, double*); #define libclut_model_cieluv_to_ciexyz(L, u, v, Xn, Yn, Zn, X, Y, Z) \ do \ { \ double x__ = (Xn), y__ = (Yn), l__ = (L), l13__ = l__ * 13; \ double t__ = x__ + 15 * y__ + 3 * (Zn); \ double u__ = 4 * x__ / t__; \ double v__ = 9 * y__ / t__; \ u__ = (u) / l13__ + u__; \ v__ = (v) / l13__ + v__; \ if (l__ <= (double)8) \ y__ *= l__ * 27 / 24389; \ else \ { \ l__ += 16, l__ /= 116; \ y__ *= l__ *= l__ * l__; \ } \ *(Y) = y__; \ *(X) = y__ * 9 * u__ / (4 * v__); \ *(Z) = y__ * (12 - 3 * u__ - 20 * v__) / (4 * v__); \ } \ while (0) /** * Convert from CIELCh to CIE L*u*v*. * * Requires linking with `-lm`. * * @param C The C*_uv component. * @param h The h_uv component. * @param u Output parameter for the u* parameter. * @param v Output parameter for the v* parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_cielch_to_cieluv)(double, double, double*, double*); #define libclut_model_cielch_to_cieluv(C, h, u, v) \ do \ { \ double h__ = (h), C__ = (C); \ *(u) = sin(h__) * C__; \ *(v) = cos(h__) * C__; \ } \ while (0) /** * Convert from CIE L*u*v* to CIELCh. * * Requires linking with `-lm`. * * @param u The u* component. * @param v The v* component. * @param C Output parameter for the C*_uv parameter. * @param h Output parameter for the h_uv parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_cieluv_to_cielch)(double, double, double*, double*); #define libclut_model_cieluv_to_cielch(u, v, C, h) \ do \ { \ double u__ = (u), v__ = (v__); \ *(C) = sqrt(u__ * u__ + v__ * v__); \ *(h) = atan2(u__, v__); \ } \ while (0) /** * Convert from sRGB to YIQ. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_standard_to_linear1` is not undefined. * * @param r The R component. * @param g The G component. * @param b The B component. * @param y Output parameter for the Y parameter. * @param i Output parameter for the I parameter. * @param q Output parameter for the Q parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_srgb_to_yiq)(double, double, double, double*, double*, double*); #define libclut_model_srgb_to_yiq(r, g, b, y, i, q) \ do \ { \ double r__ = libclut_model_standard_to_linear1(r); \ double g__ = libclut_model_standard_to_linear1(g); \ double b__ = libclut_model_standard_to_linear1(b); \ *(y) = r__ * 299 / 1000 + g__ * 587 / 1000 + b__ * 114 / 1000; \ *(i) = r__ * 596 / 1000 - g__ * 247 / 1000 - b__ * 322 / 1000; \ *(q) = r__ * 211 / 1000 - g__ * 523 / 1000 + b__ * 312 / 1000; \ } \ while (0) /** * Convert from YIQ to sRGB. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_linear_to_standard1` is not undefined. * * @param y The Y component. * @param i The I component. * @param q The Q component. * @param r Output parameter for the R parameter. * @param g Output parameter for the G parameter. * @param b Output parameter for the B parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_yiq_to_srgb)(double, double, double, double*, double*, double*); #define libclut_model_yiq_to_srgb(y, i, q, r, g, b) \ do \ { \ double y__ = (y), i__ = (i), q__ = (q), r__, g__, b__; \ r__ = y__ + i__ * 596 / 1000 + q__ * 621 / 1000; \ g__ = y__ - i__ * 272 / 1000 - q__ * 647 / 1000; \ b__ = y__ - i__ * 1106 / 1000 + q__ * 1703 / 1000; \ *(r) = libclut_model_linear_to_standard1(r__); \ *(g) = libclut_model_linear_to_standard1(g__); \ *(b) = libclut_model_linear_to_standard1(b__); \ } \ while (0) /** * Convert from sRGB to YDbDr. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_standard_to_linear1` is not undefined. * * @param r The R component. * @param g The G component. * @param b The B component. * @param y Output parameter for the Y parameter. * @param db Output parameter for the Db parameter. * @param dr Output parameter for the Dr parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_srgb_to_ydbdr)(double, double, double, double*, double*, double*); #define libclut_model_srgb_to_ydbdr(r, g, b, y, db, dr) \ do \ { \ double r__ = libclut_model_standard_to_linear1(r); \ double g__ = libclut_model_standard_to_linear1(g); \ double b__ = libclut_model_standard_to_linear1(b); \ *(y) = r__ * 299 / 1000 + g__ * 587 / 1000 + b__ * 114 / 1000; \ *(db) = -r__ * 450 / 1000 - g__ * 883 / 1000 + b__ * 1333 / 1000; \ *(dr) = -r__ * 1333 / 1000 + g__ * 1116 / 1000 + b__ * 217 / 1000; \ } \ while (0) /** * Convert from YDbDr to sRGB. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_linear_to_standard1` is not undefined. * * @param y The Y component. * @param db The Db component. * @param dr The Dr component. * @param r Output parameter for the R parameter. * @param g Output parameter for the G parameter. * @param b Output parameter for the B parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_ydbdr_to_srgb)(double, double, double, double*, double*, double*); #define libclut_model_ydbdr_to_srgb(y, db, dr, r, g, b) \ do \ { \ double y__ = (y), db__ = (db), dr__ = (dr), r__, g__, b__; \ db__ /= 1000000000000000ULL; \ dr__ /= 1000000000000000ULL; \ r__ = y__ + db__ * 92303716148ULL - dr__ * 525912630661865ULL; \ g__ = y__ - db__ * 129132898890509ULL + dr__ * 267899328207599ULL; \ b__ = y__ + db__ * 664679059978955ULL - dr__ * 79202543533ULL; \ *(r) = libclut_model_linear_to_standard1(r__); \ *(g) = libclut_model_linear_to_standard1(g__); \ *(b) = libclut_model_linear_to_standard1(b__); \ } \ while (0) /** * Convert from YUV to YDbDr. * * @param u The U component. * @param v The V component. * @param db Output parameter for the Db parameter. * @param dr Output parameter for the Dr parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_yuv_to_ydbdr)(double, double, double*, double*); #define libclut_model_yuv_to_ydbdr(u, v, db, dr) \ do \ { \ *(db) = 3069 * (u) / 1000; \ *(dr) = -2169 * (v) / 1000; \ } \ while (0) /** * Convert from YDbDr to YUV. * * @param db The Db component. * @param dr The Dr component. * @param u Output parameter for the U parameter. * @param v Output parameter for the V parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_ydbdr_to_yuv)(double, double, double*, double*); #define libclut_model_ydbdr_to_yuv(db, dr, u, v) \ do \ { \ *(u) = (db) * 1000 / 3069; \ *(v) = (dr) * 1000 / -2169; \ } \ while (0) /** * Convert from sRGB to YPbPr. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_standard_to_linear1` is not undefined. * * @param r The R component. * @param g The G component. * @param b The B component. * @param y Output parameter for the Y parameter. * @param pb Output parameter for the Pb parameter. * @param pr Output parameter for the Pr parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_srgb_to_ypbpr)(double, double, double, double*, double*, double*); #define libclut_model_srgb_to_ypbpr(r, g, b, y, pb, pr) \ do \ { \ double r__ = libclut_model_standard_to_linear1(r); \ double g__ = libclut_model_standard_to_linear1(g); \ double b__ = libclut_model_standard_to_linear1(b); \ double y__; \ y__ = r__ * 2126 / 10000; \ y__ += g__ * 7152 / 10000; \ y__ += b__ * 722 / 10000; \ *(y) = y__; \ *(pb) = b__ - y__; \ *(pr) = r__ - y__; \ ; \ } \ while (0) /** * Convert from YPbPr to sRGB. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_linear_to_standard1` is not undefined. * * @param y The Y component. * @param pb The Pb component. * @param pr The Pr component. * @param r Output parameter for the R parameter. * @param g Output parameter for the G parameter. * @param b Output parameter for the B parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_ypbpr_to_srgb)(double, double, double, double*, double*, double*); #define libclut_model_ypbpr_to_srgb(y, pb, pr, r, g, b) \ do \ { \ double y__ = (y), r__ = (pr) + y__, g__, b__ = (pb) + y__; \ y__ -= r__ * 2126 / 10000; \ y__ -= b__ * 722 / 10000; \ g__ = y__ * 10000 / 7152; \ *(r) = libclut_model_linear_to_standard1(r__); \ *(g) = libclut_model_linear_to_standard1(g__); \ *(b) = libclut_model_linear_to_standard1(b__); \ } \ while (0) /** * Convert from sRGB to YCgCo. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_standard_to_linear1` is not undefined. * * @param r The R component. * @param g The G component. * @param b The B component. * @param y Output parameter for the Y parameter. * @param cg Output parameter for the Cg parameter. * @param co Output parameter for the Co parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_srgb_to_ycgco)(double, double, double, double*, double*, double*); #define libclut_model_srgb_to_ycgco(r, g, b, y, cg, co) \ do \ { \ double r__ = libclut_model_standard_to_linear1(r); \ double g__ = libclut_model_standard_to_linear1(g); \ double b__ = libclut_model_standard_to_linear1(b); \ *(y) = r__ / 4 + g__ / 2 + b__ / 4; \ *(cg) = r__ / -4 + g__ / 2 - b__ / 4; \ *(co) = r__ / 2 - b__ / 2; \ } \ while (0) /** * Convert from YCgCo to sRGB. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_linear_to_standard1` is not undefined. * * @param y The Y component. * @param cg The Cg component. * @param co The Co component. * @param r Output parameter for the R parameter. * @param g Output parameter for the G parameter. * @param b Output parameter for the B parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_ycgco_to_srgb)(double, double, double, double*, double*, double*); #define libclut_model_ycgco_to_srgb(y, cg, co, r, g, b) \ do \ { \ double y__ = (y), cg__ = (cg), co__ = (co); \ double r__ = y__ - cg__ + co__; \ double g__ = y__ + cg__; \ double b__ = y__ - cg__ - co__; \ *(r) = libclut_model_linear_to_standard1(r__); \ *(g) = libclut_model_linear_to_standard1(g__); \ *(b) = libclut_model_linear_to_standard1(b__); \ } \ while (0) /** * Convert from CIE 1960 UCS to CIE XYZ. * * @param u The u component. * @param v The v component. * @param Y The Y component. * @param x Output parameter for the X parameter. * @param y Output parameter for the Y parameter. * @param z Output parameter for the Z parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_cie_1960_ucs_to_ciexyz)(double, double, double, double*, double*, double*); #define libclut_model_cie_1960_ucs_to_ciexyz(u, v, Y, x, y, z) \ do \ { \ double u__ = (u), v__ = (v), y__ = (Y); \ *(y) = y__; \ *(x) = 3 * y__ * u__ / (2 * v__); \ *(z) = y__ * ((4 - u__) / (2 * v__) - 1) / 5; \ } \ while (0) /** * Convert from CIE XYZ to CIE 1960 UCS. * * @param x The X component. * @param y The Y component. * @param z The Z component. * @param u Output parameter for the u parameter. * @param v Output parameter for the v parameter. * @param Y Output parameter for the Y parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_ciexyz_to_cie_1960_ucs)(double, double, double, double*, double*, double*); #define libclut_model_ciexyz_to_cie_1960_ucs(x, y, z, u, v, Y) \ do \ { \ double x__ = (x), y__ = (y); \ double d__ = x__ + 15 * y__ + 3 * (z); \ *(u) = 4 * x__ / d__; \ *(v) = 6 * y__ / d__; \ *(Y) = y__; \ } \ while (0) /** * Convert from CIEUVW to CIE 1960 UCS. * * @param U:double The U* component. * @param V:double The V* component. * @param W:double The W* component. * @param u0:double The u parameter for the white point. * @param v0:double The v parameter for the white point. * @param u:double* Output parameter for the u parameter. * @param v:double* Output parameter for the v parameter. * @param Y:double* Output parameter for the Y parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_cieuvw_to_cie_1960_ucs)(double, double, double, double, double, double*, double*, double*); #define libclut_model_cieuvw_to_cie_1960_ucs(U, V, W, u0, v0, u, v, Y) \ do \ { \ double w__ = (W), y__ = (w__ + 17) / 25; \ *(Y) = y__ *= y__ * y__; \ w__ *= 13; \ *(u) = (U) / w__ + (u0); \ *(v) = (V) / w__ + (v0); \ } \ while (0) /** * Convert from CIE 1960 UCS to CIEUVW. * * Requires linking with `-lm`. * * @param u:double The u component. * @param v:double The v component. * @param Y:double The Y component. * @param u0:double The u parameter for the white point. * @param v0:double The v parameter for the white point. * @param U:double* Output parameter for the U* parameter. * @param V:double* Output parameter for the V* parameter. * @param W:double* Output parameter for the W* parameter. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_cie_1960_ucs_to_cieuvw)(double, double, double, double, double, double*, double*, double*); #define libclut_model_cie_1960_ucs_to_cieuvw(u, v, Y, u0, v0, U, V, W) \ do \ { \ double w__ = 25 * cbrt(Y) - 17; \ *(W) = w__; \ w__ *= 13; \ *(U) = w__ * ((u) - (u0)); \ *(V) = w__ * ((v) - (v0)); \ } \ while (0) /** * Create a matrix for converting values between * two RGB colour spaces. * * @param from The input colour space, the Y-component is only necessary * for the white point, `NULL` for CIE XYZ. * @param to The output colour space, the Y-component is only necessary * for the white point, `NULL` for CIE XYZ. * @param M Output matrix for conversion from `from` to `to`. * @param Minv Output matrix for conversion from `to` to `from`, may be `NULL`. * @return Zero on success, -1 on error. * * @throws EINVAL The colour space cannot be used. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) int libclut_model_get_rgb_conversion_matrix(const libclut_rgb_colour_space_t*, const libclut_rgb_colour_space_t*, libclut_colour_space_conversion_matrix_t, libclut_colour_space_conversion_matrix_t); /** * Convert an RGB colour into another RGB colour space. * * Both RGB colour spaces must have same gamma functions as sRGB. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_standard_to_linear1` or * `libclut_model_linear_to_standard1` is not undefined. * * @param r The red component of the colour to convert. * @param g The green component of the colour to convert. * @param b The blue component of the colour to convert. * @param M Conversion matrix, create with `libclut_model_get_rgb_conversion_matrix`, * must not have side-effects. * @param out_r Output parameter for the new red component. * @param out_g Output parameter for the new green component. * @param out_b Output parameter for the new blue component. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_convert_rgb)(double, double, double, libclut_colour_space_conversion_matrix_t, double*, double*, double*); #define libclut_model_convert_rgb(r, g, b, M, out_r, out_g, out_b) \ do \ { \ double r__ = libclut_model_standard_to_linear1(r); \ double g__ = libclut_model_standard_to_linear1(g); \ double b__ = libclut_model_standard_to_linear1(b); \ *(out_r) = libclut_model_linear_to_standard1((M)[0][0] * r__ + (M)[0][1] * g__ + (M)[0][2] * b__); \ *(out_g) = libclut_model_linear_to_standard1((M)[1][0] * r__ + (M)[1][1] * g__ + (M)[1][2] * b__); \ *(out_b) = libclut_model_linear_to_standard1((M)[2][0] * r__ + (M)[2][1] * g__ + (M)[2][2] * b__); \ } \ while (0) /** * Convert an RGB colour of a custom RGB colour space to CIE XYZ. * * The RGB colour space must have same gamma functions as sRGB. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_standard_to_linear1` is not undefined. * * @param r The red component. * @param g The green component. * @param b The blue component. * @param M Conversion matrix, create with `libclut_model_get_rgb_conversion_matrix`, * must not have side-effects. * @param x Output parameter for the X component. * @param y Output parameter for the Y component * @param z Output parameter for the Z component. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_rgb_to_ciexyz)(double, double, double, libclut_colour_space_conversion_matrix_t, double*, double*, double*); #define libclut_model_rgb_to_ciexyz(r, g, b, M, x, y, z) \ do \ { \ double r__ = libclut_model_standard_to_linear1(r); \ double g__ = libclut_model_standard_to_linear1(g); \ double b__ = libclut_model_standard_to_linear1(b); \ *(x) = (M)[0][0] * r__ + (M)[0][1] * g__ + (M)[0][2] * b__; \ *(y) = (M)[1][0] * r__ + (M)[1][1] * g__ + (M)[1][2] * b__; \ *(z) = (M)[2][0] * r__ + (M)[2][1] * g__ + (M)[2][2] * b__; \ } \ while (0) /** * Convert a CIE XYZ colour to a custom RGB colour space. * * The RGB colour space must have same gamma functions as sRGB. * * Requires linking with '-lclut', or '-lm' if * `libclut_model_linear_to_standard1` is not undefined. * * @param x The X component. * @param y The Y component. * @param z The Z component. * @param M Conversion matrix, create with `libclut_model_get_rgb_conversion_matrix`, * must not have side-effects. * @param r Output parameter for the red component. * @param g Output parameter for the green component * @param b Output parameter for the blue component. */ LIBCLUT_GCC_ONLY__(__attribute__((__leaf__))) void (libclut_model_ciexyz_to_rgb)(double, double, double, libclut_colour_space_conversion_matrix_t, double*, double*, double*); #define libclut_model_ciexyz_to_rgb(x, y, z, M, r, g, b) \ do \ { \ double x__ = (x), y__ = (y), z__ = (z); \ *(r) = libclut_model_linear_to_standard1((M)[0][0] * x__ + (M)[0][1] * y__ + (M)[0][2] * z__); \ *(g) = libclut_model_linear_to_standard1((M)[1][0] * x__ + (M)[1][1] * y__ + (M)[1][2] * z__); \ *(b) = libclut_model_linear_to_standard1((M)[2][0] * x__ + (M)[2][1] * y__ + (M)[2][2] * z__); \ } \ while (0) #if defined(__clang__) # pragma GCC diagnostic pop #endif #endif