From 67bc1de939bdfb2072074bc9554dfea9b32f64cd Mon Sep 17 00:00:00 2001 From: Mattias Andrée Date: Sun, 6 Oct 2019 20:36:00 +0200 Subject: Simplify MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Mattias Andrée --- doc/info/chap/clut-manipulation.texinfo | 477 -------------------------------- 1 file changed, 477 deletions(-) delete mode 100644 doc/info/chap/clut-manipulation.texinfo (limited to 'doc/info/chap/clut-manipulation.texinfo') diff --git a/doc/info/chap/clut-manipulation.texinfo b/doc/info/chap/clut-manipulation.texinfo deleted file mode 100644 index 99fc0f0..0000000 --- a/doc/info/chap/clut-manipulation.texinfo +++ /dev/null @@ -1,477 +0,0 @@ -@node CLUT Manipulation -@chapter CLUT Manipulation - -@command{libclut} has a number of function-like macros -for manipulating colour lookup tables. These have -3 common initial parameters, that describe the -colour lookup table that shall be manipulated. -@table @code -@item clut -Pointer to the gamma ramps. This must be a pointer -to an instance of a @code{struct} that must at least -have the array members @code{red}, @code{green}, and -@code{blue}, whose elements shall be of the type -specified by the parameter @code{type}. The @code{struct} -must also have the scalar members @code{red_size}, -@code{green_size}, and @code{blue_size}, and shall be -of the type @code{size_t}; they shall specify the -number of stops (elements) in the arrays @code{.red}, -@code{.green}, and @code{.blue}, respectively, which -shall be the gamma ramp for the ``red''@footnote{Acutally -orange.}, green, and blue channels respectively. -@item max -The maximum value on each stop in the ramps. -@item type -The data type used for each stop in the ramps. -@end table -@noindent -Additionally, these macros do not allow that arguments -have side-effects.@footnote{Some macros currently allow -side-effects on some parameters, but this may change -in the future.} None, if the macros have a return value. - -@table @code -@item libclut_rgb_contrast(clut, max, type, r, g, b) -Apply contrast correction on the colour curves using sRGB. - -In this context, contrast is a measure of difference between -the whitepoint and blackpoint, if the difference is 0 than -they are both grey. - -Parameters: -@table @code -@item r -The contrast parameter for the red curve. -@item g -The contrast parameter for the green curve. -@item b -The contrast parameter for the blue curve. -@end table - - -@item libclut_cie_contrast(clut, max, type, r, g, b) -Apply contrast correction on the colour curves using CIE xyY. - -In this context, contrast is a measure of difference between -the whitepoint and blackpoint, if the difference is 0 than -they are both grey. - -Requires linking with @option{-lclut}. - -Parameters: -@table @code -@item r -The contrast parameter for the red curve. -@item g -The contrast parameter for the green curve. -@item b -The contrast parameter for the blue curve. -@end table - - -@item libclut_rgb_brightness(clut, max, type, r, g, b) -Apply brightness correction on the colour curves using sRGB. - -In this context, brightness is a measure of the whiteness -of the whitepoint. - -Parameters: -@table @code -@item r -The brightness parameter for the red curve. -@item g -The brightness parameter for the green curve. -@item b -The brightness parameter for the blue curve. -@end table - - -@item libclut_cie_brightness(clut, max, type, r, g, b) -Apply brightness correction on the colour curves using CIE xyY. - -In this context, brightness is a measure of the whiteness -of the whitepoint. - -Requires linking with @option{-lclut}. - -Parameters: -@table @code -@item r -The brightness parameter for the red curve. -@item g -The brightness parameter for the green curve. -@item b -The brightness parameter for the blue curve. -@end table - - -@item libclut_linearise(clut, max, type, r, g, b) -Convert the curves from formatted in standard RGB to linear RGB. - -Requires linking with @option{-lclut}, or @option{-lm} if -@code{libclut_model_standard_to_linear1} is not undefined. - -Parameters: -@table @code -@item r -Whether to convert the red colour curve. -@item g -Whether to convert the green colour curve. -@item b -Whether to convert the blue colour curve. -@end table - - -@item libclut_standardise(clut, max, type, r, g, b) -Convert the curves from formatted in linear RGB to standard RGB. - -Requires linking with @option{-lclut}, or @option{-lm} if -@code{libclut_model_linear_to_standard1} is not undefined. - -Parameters: -@table @code -@item r -Whether to convert the red colour curve. -@item g -Whether to convert the green colour curve. -@item b -Whether to convert the blue colour curve. -@end table - - -@item libclut_gamma(clut, max, type, r, g, b) -Apply gamma correction on the colour curves. - -Requires linking with @option{-lm}. - -Parameters: -@table @code -@item r -The gamma parameter for the red curve. -@item g -The gamma parameter for the green curve. -@item b -The gamma parameter for the blue curve. -@end table - - -@item libclut_negative(clut, max, type, r, g, b) -Reverse the colour curves (negative image with gamma preservation.) - -Parameters: -@table @code -@item r -Whether to reverse the red colour curve. -@item g -Whether to reverse the green colour curve. -@item b -Whether to reverse the blue colour curve. -@end table - - -@item libclut_rgb_invert(clut, max, type, r, g, b) -Invert the colour curves (negative image with gamma -invertion), using sRGB. - -Parameters: -@table @code -@item r -Whether to invert the red colour curve. -@item g -Whether to invert the green colour curve. -@item b -Whether to invert the blue colour curve. -@end table - - -@item libclut_cie_invert(clut, max, type, r, g, b) -Invert the colour curves (negative image with gamma -invertion), using CIE xyY. - -Requires linking with @option{-lclut}. - -Parameters: -@table @code -@item r -Whether to invert the red colour curve. -@item g -Whether to invert the green colour curve. -@item b -Whether to invert the blue colour curve. -@end table - - -@item libclut_sigmoid(clut, max, type, rp, gp, bp) -Apply S-curve correction on the colour curves. -This is intended for fine tuning LCD monitors, -4.5 is good value start start testing at. -You would probably like to use @code{rgb_limits} -before this to adjust the blackpoint as that is -the only way to adjust the blackpoint on many LCD -monitors. - -Requires linking with @option{-lm}. - -Parameters: -@table @code -@item rp -Pointer to the sigmoid parameter for the red curve. -@code{NULL} for no adjustment. -@item gp -Pointer to the sigmoid parameter for the green curve. -@code{NULL} for no adjustment. -@item bp -Pointer to the sigmoid parameter for the blue curve. -@code{NULL} for no adjustment. -@end table - - -@item libclut_rgb_limits(clut, max, type, rmin, rmax, gmin, gmax, bmin, bmax) -Changes the blackpoint and the whitepoint, using sRGB. - -Parameters: -@table @code -@item rmin -The red component value of the blackpoint. -That is, the brightness on the red channel. -@item rmax -The red component value of the whitepoint. -That is, the contrast on the red channel. -@item gmin -The green component value of the blackpoint. -That is, the brightness on the green channel. -@item gmax -The green component value of the whitepoint. -That is, the contrast on the green channel. -@item bmin -The blue component value of the blackpoint. -That is, the brightness on the blue channel. -@item bmax -The blue component value of the whitepoint. -That is, the contrast on the blue channel. -@end table - - -@item libclut_cie_limits(clut, max, type, rmin, rmax, gmin, gmax, bmin, bmax) -Changes the blackpoint and the whitepoint, using CIE xyY. - -Requires linking with @option{-lclut}. - -Parameters: -@table @code -@item rmin -The red component value of the blackpoint. -That is, the brightness on the red channel. -@item rmax -The red component value of the whitepoint. -That is, the contrast on the red channel. -@item gmin -The green component value of the blackpoint. -That is, the brightness on the green channel. -@item gmax -The green component value of the whitepoint. -That is, the contrast on the green channel. -@item bmin -The blue component value of the blackpoint. -That is, the brightness on the blue channel. -@item bmax -The blue component value of the whitepoint. -That is, the contrast on the blue channel. -@end table - - -@item libclut_manipulate(clut, max, type, r, g, b) -Manipulate the colour curves using a function on the -sRGB colour space. - -Parameters: -@table @code -@item r -Function to manipulate the red colour curve. It -shall map from old stop values to new stop values. -This should either be @code{NULL} for no manipulation, -or a function that maps from @code{double} to -@code{double}. 0 % and 100 % is encoded as 0 and 1, -respectively, in both input and ouput. Its signature -should be @code{double (*)(double)}. -@item g -Function to manipulate the green colour curve. It -shall map from old stop values to new stop values. -This should either be @code{NULL} for no manipulation, -or a function that maps from @code{double} to -@code{double}. 0 % and 100 % is encoded as 0 and 1, -respectively, in both input and ouput. Its signature -should be @code{double (*)(double)}. -@item b -Function to manipulate the blue colour curve. It -shall map from old stop values to new stop values. -This should either be @code{NULL} for no manipulation, -or a function that maps from @code{double} to -@code{double}. 0 % and 100 % is encoded as 0 and 1, -respectively, in both input and ouput. Its signature -should be @code{double (*)(double)}. -@end table - - -@item libclut_cie_manipulate(clut, max, type, r, g, b) -Manipulate the colour curves using a function on the -CIE xyY colour space. - -Requires linking with @option{-lclut}. - -Parameters: -@table @code -@item r -Function to manipulate the red colour curve. It -shall map from old stop values to new stop values. -This should either be @code{NULL} for no manipulation, -or a function that maps from @code{double} to -@code{double}. 0 % and 100 % is encoded as 0 and 1, -respectively, in both input and ouput. Its signature -should be @code{double (*)(double)}. -@item g -Function to manipulate the green colour curve. It -shall map from old stop values to new stop values. -This should either be @code{NULL} for no manipulation, -or a function that maps from @code{double} to -@code{double}. 0 % and 100 % is encoded as 0 and 1, -respectively, in both input and ouput. Its signature -should be @code{double (*)(double)}. -@item b -Function to manipulate the blue colour curve. It -shall map from old stop values to new stop values. -This should either be @code{NULL} for no manipulation, -or a function that maps from @code{double} to -@code{double}. 0 % and 100 % is encoded as 0 and 1, -respectively, in both input and ouput. Its signature -should be @code{double (*)(double)}. -@end table - - -@item libclut_start_over(clut, max, type, r, g, b) -Resets colour curvers to linear mappings. -(Identity mapping if imaginged to map from [0, 1] to [0, 1].) - -Parameters: -@table @code -@item r -Whether to reset the red colour curve. -@item g -Whether to reset the green colour curve. -@item b -Whether to reset the blue colour curve. -@end table - - -@item libclut_clip(clut, max, type, r, g, b) -Clip colour curves to only map to values between the -minimum and maximum. This should be done, before apply -the curves, and before applying changes with limited -domain. - -Values below 0 are set to 0, and values above @code{max} -are set to @code{max}. - -Parameters: -@table @code -@item r -Whether to clip the red colour curve. -@item g -Whether to clip the green colour curve. -@item b -Whether to clip the blue colour curve. -@end table - - -@item libclut_lower_resolution(clut, max, type, rx, ry, gx, gy, bx, by) -Emulates low colour resolution. - -Parameters: -@table @code -@item rx -The desired emulated red encoding resolution, -0 for unchanged. -@item ry -The desired emulated red output resolution, -0 for unchanged. -@item gx -The desired emulated green encoding resolution, -0 for unchanged. -@item gy -The desired emulated green output resolution, -0 for unchanged. -@item bx -The desired emulated blue encoding resolution, -0 for unchanged. -@item by -The desired emulated blue output resolution, -0 for unchanged. -@end table - - -@item libclut_apply(clut, max, type, filter, fmax, ftype, r, g, b) -Applies a filter or calibration. - -Parameters: -@table @code -@item filter -Same as @code{clut}, but for the filter to apply. -@item fmax -Same as @code{max}, but for the filter to apply. -@item ftype -Same as @code{type}, but for the filter to apply. -(Not actually used.) -@item r -Whether to apply the filter for the red curve. -@item g -Whether to apply the filter for the green curve. -@item b -Whether to apply the filter for the blue curve. -@end table - - -@item libclut_cie_apply(clut, max, type, filter, fmax, ftype, r, g, b) -Applies a filter or calibration, using CIE xyY. - -Requires linking with @option{-lclut}. - -Parameters: -@table @code -@item filter -Same as @code{clut}, but for the filter to apply. -@item fmax -Same as @code{max}, but for the filter to apply. -@item ftype -Same as @code{type}, but for the filter to apply. -(Not actually used.) -@item r -Whether to apply the filter for the red curve. -@item g -Whether to apply the filter for the green curve. -@item b -Whether to apply the filter for the blue curve. -@end table - - -@item libclut_translate(dclut, dmax, dtype, sclut, smax, stype) -Translates a gamma ramp structure to another -gamma ramp structure type. - -Parameters: -@table @code -@item dclut -Like @code{clut} described above, for the destination. -@item dmax -Like @code{max} described above, for the destination. -@item dtype -Like @code{type} described above, for the destination. -@item sclut -Like @code{clut} described above, for the source. -@item smax -Like @code{max} described above, for the source. -@item stype -Like @code{type} described above, for the source. -(Not actually used.) -@end table -@end table - -- cgit v1.2.3-70-g09d2