/**
* crt-calibrator – Calibration utility for CRT monitors
* Copyright © 2014 Mattias Andrée (maandree@member.fsf.org)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*/
#include "calibrator.h"
#include "gamma.h"
#include "state.h"
#include
#include
#include
#include
#include
/**
* Draw bars in different shades of grey, red, green and blue
* used for calibrating the contrast and brightness
*/
void draw_contrast_brightness(void)
{
const int CONTRAST_BRIGHTNESS_LEVELS[21] =
{
0, 17, 27, 38, 48, 59, 70, 82, 94, 106, 119, 131,
144, 158, 171, 185, 198, 212, 226, 241, 255
};
size_t f;
uint32_t y, x;
for (f = 0; f < framebuffer_count; f++)
{
framebuffer_t* restrict fb = framebuffers + f;
for (y = 0; y < 4; y++)
for (x = 0; x < 21; x++)
{
int v = CONTRAST_BRIGHTNESS_LEVELS[x];
uint32_t colour = fb_colour(v * ((y == 1) | (y == 0)),
v * ((y == 2) | (y == 0)),
v * ((y == 3) | (y == 0)));
fb_fill_rectangle(fb, colour,
x * fb->width / 21,
y * fb->height / 4,
(x + 1) * fb->width / 21 - x * fb->width / 21,
(y + 1) * fb->height / 4 - y * fb->height / 4);
}
}
}
/**
* Draw a seven segment display
*
* @param fb The framebuffer to draw on
* @param colour The intensity of the least intense colour to use
* @param x The X component of the top left corner of the seven segment display
* @param y The Y component of the top left corner of the seven segment display
*/
void draw_digit(framebuffer_t* restrict fb, int colour, uint32_t x, uint32_t y)
{
uint32_t c;
c = fb_colour(colour + 0, colour + 0, colour + 0);
fb_fill_rectangle(fb, c, x + 20, y, 80, 20);
c = fb_colour(colour + 1, colour + 1, colour + 1);
fb_fill_rectangle(fb, c, x, y + 20, 20, 80);
c = fb_colour(colour + 2, colour + 2, colour + 2);
fb_fill_rectangle(fb, c, x + 100, y + 20, 20, 80);
c = fb_colour(colour + 3, colour + 3, colour + 3);
fb_fill_rectangle(fb, c, x + 20, y + 100, 80, 20);
c = fb_colour(colour + 4, colour + 4, colour + 4);
fb_fill_rectangle(fb, c, x, y + 120, 20, 80);
c = fb_colour(colour + 5, colour + 5, colour + 5);
fb_fill_rectangle(fb, c, x + 100, y + 120, 20, 80);
c = fb_colour(colour + 6, colour + 6, colour + 6);
fb_fill_rectangle(fb, c, x + 20, y + 200, 80, 20);
}
/**
* Manipulate a CRT controllers gamma ramps to display a specific digit
* for one of the seven segment display on only that CRT controller's
* monitors
*
* @param crtc The CRT controller information
* @param colour The intensity of the least intense colour in the seven segment display
* @param value The valud of the digit to display
*/
void gamma_digit(drm_crtc_t* restrict crtc, int colour, size_t value)
{
#define __ 0
const int DIGITS[11] = { 1 | 2 | 4 | __ | 16 | 32 | 64, /* (0) */
__ | __ | 4 | __ | __ | 32 | __, /* (1) */
1 | __ | 4 | 8 | 16 | __ | 64, /* (2) */
1 | __ | 4 | 8 | __ | 32 | 64, /* (3) */
__ | 2 | 4 | 8 | __ | 32 | __, /* (4) */
1 | 2 | __ | 8 | __ | 32 | 64, /* (5) */
1 | 2 | __ | 8 | 16 | 32 | 64, /* (6) */
1 | __ | 4 | __ | __ | 32 | __, /* (7) */
1 | 2 | 4 | 8 | 16 | 32 | 64, /* (8) */
1 | 2 | 4 | 8 | __ | 32 | 64, /* (9) */
__ | __ | __ | __ | __ | __ | __}; /* not visible */
int i, digit = DIGITS[value];
for (i = 0; i < 7; i++)
{
uint16_t c = (digit & (1 << i)) ? 0xFFFF : 0;
int j = i + colour;
crtc->red[j] = crtc->green[j] = crtc->blue[j] = c;
}
#undef __
}
/**
* Draw an unique index on each monitor
*
* @return Zero on success, -1 on error
*/
int draw_id(void)
{
size_t f, c, id = 0;
for (f = 0; f < framebuffer_count; f++)
{
framebuffer_t* restrict fb = framebuffers + f;
fb_fill_rectangle(fb, fb_colour(0, 0, 0), 0, 0, fb->width, fb->height);
draw_digit(fb, 1, 40, 40);
draw_digit(fb, 8, 180, 40);
}
for (c = 0; c < crtc_count; c++)
{
drm_crtc_t* restrict crtc = crtcs + c;
if (drm_get_gamma(crtc) < 0)
return -1;
gamma_digit(crtc, 1, id < 10 ? 10 : (id / 10) % 10);
gamma_digit(crtc, 8, (id / 1) % 10);
id++;
if (drm_set_gamma(crtc) < 0)
return -1;
}
return 0;
}
/**
* Draw squares used as reference when tweeking the gamma correction
*/
void draw_gamma(void)
{
size_t f;
uint32_t x, y;
for (f = 0; f < framebuffer_count; f++)
{
framebuffer_t* restrict fb = framebuffers + f;
for (x = 0; x < 4; x++)
{
int r = (x == 1) || (x == 0);
int g = (x == 2) || (x == 0);
int b = (x == 3) || (x == 0);
uint32_t background = fb_colour(128 * r, 128 * g, 128 * b);
uint32_t average = fb_colour(188 * r, 188 * g, 188 * b);
uint32_t high = fb_colour(255 * r, 255 * g, 255 * b);
uint32_t low = fb_colour(0, 0, 0);
uint32_t xoff = x * fb->width / 4;
fb_fill_rectangle(fb, background, xoff, 0, fb->width / 4, fb->height);
xoff += (fb->width / 4 - 200) / 2;
fb_fill_rectangle(fb, high, xoff, 40, 200, 200);
fb_fill_rectangle(fb, average, xoff + 50, 40, 100, 200);
fb_fill_rectangle(fb, average, xoff, 280, 200, 200);
for (y = 0; y < 200; y += 2)
{
fb_draw_horizontal_line(fb, high, xoff + 50, 280 + y + 0, 100);
fb_draw_horizontal_line(fb, low , xoff + 50, 280 + y + 1, 100);
}
fb_fill_rectangle(fb, average, xoff, 520, 200, 200);
fb_fill_rectangle(fb, high, xoff + 50, 520, 100, 200);
}
}
}
/**
* Print a pattern on the screen that can be used when
* calibrating the convergence
*/
void draw_convergence(void)
{
uint32_t black = fb_colour(0, 0, 0);
uint32_t white = fb_colour(255, 255, 255);
uint32_t x, y;
size_t f;
for (f = 0; f < framebuffer_count; f++)
{
framebuffer_t* restrict fb = framebuffers + f;
fb_fill_rectangle(fb, black, 0, 0, fb->width, fb->height);
for (y = 0; y <= fb->height; y += 16)
{
if (y == fb->height)
y = fb->height - 1;
for (x = 0; x <= fb->width; x += 16)
{
if (x == fb->height)
x = fb->height - 1;
fb_draw_pixel(fb, white, x, y);
}
}
}
}
/**
* Print a pattern on the screen that can be used when
* calibrating the moiré cancellation
*
* @param gap The horizontal and vertical gap, in pixels, between the dots
* @param diagonal Whether to draw dots in a diagonal pattern
*/
void draw_moire(uint32_t gap, int diagonal)
{
uint32_t black = fb_colour(0, 0, 0);
uint32_t white = fb_colour(255, 255, 255);
uint32_t x, y, gap2 = gap << 1;
size_t f;
gap += (uint32_t)(!diagonal);
if (diagonal)
for (f = 0; f < framebuffer_count; f++)
{
framebuffer_t* restrict fb = framebuffers + f;
fb_fill_rectangle(fb, black, 0, 0, fb->width, fb->height);
for (y = 0; y < fb->height; y += gap)
for (x = (y % gap2); x < fb->width; x += gap2)
fb_draw_pixel(fb, white, x, y);
}
else
for (f = 0; f < framebuffer_count; f++)
{
framebuffer_t* restrict fb = framebuffers + f;
fb_fill_rectangle(fb, black, 0, 0, fb->width, fb->height);
for (y = 0; y < fb->height; y += gap)
for (x = 0; x < fb->width; x += gap)
fb_draw_pixel(fb, white, x, y);
}
}
/**
* Analyse the monitors calibrations
*
* @return Zero on success, -1 on error
*/
int read_calibs(void)
{
size_t c;
for (c = 0; c < crtc_count; c++)
{
if (drm_get_gamma(crtcs + c) < 0)
return -1;
gamma_analyse(crtcs[c].gamma_stops, crtcs[c].red, gammas[0] + c,
contrasts[0] + c, brightnesses[0] + c);
gamma_analyse(crtcs[c].gamma_stops, crtcs[c].green, gammas[1] + c,
contrasts[1] + c, brightnesses[1] + c);
gamma_analyse(crtcs[c].gamma_stops, crtcs[c].blue, gammas[2] + c,
contrasts[2] + c, brightnesses[2] + c);
}
return 0;
}
/**
* Apply the selected calibrations to the monitors
*
* @return Zero on success, -1 on error
*/
int apply_calibs(void)
{
size_t c;
for (c = 0; c < crtc_count; c++)
{
gamma_generate(crtcs[c].gamma_stops, crtcs[c].red, gammas[0][c],
contrasts[0][c], brightnesses[0][c]);
gamma_generate(crtcs[c].gamma_stops, crtcs[c].green, gammas[1][c],
contrasts[1][c], brightnesses[1][c]);
gamma_generate(crtcs[c].gamma_stops, crtcs[c].blue, gammas[2][c],
contrasts[2][c], brightnesses[2][c]);
if (drm_set_gamma(crtcs + c) < 0)
return -1;
}
return 0;
}
/**
* Print calibrations into a file
*
* @param f The file
* @return Zero on success, -1 on error
*/
int save_calibs(FILE* f)
{
size_t c;
for (c = 0; c < crtc_count; c++)
{
if (fprintf(f, "# index = %lu\n",
c) < 0)
return -1;
if (fprintf(f, "edid = %s\n",
crtcs[c].edid) < 0)
return -1;
if (fprintf(f, "brightness = %f:%f:%f\n",
brightnesses[0][c],
brightnesses[1][c],
brightnesses[2][c]) < 0)
return -1;
if (fprintf(f, "contrast = %f:%f:%f\n",
contrasts[0][c],
contrasts[1][c],
contrasts[2][c]) < 0)
return -1;
if (fprintf(f, "gamma = %f:%f:%f\n\n",
gammas[0][c],
gammas[1][c],
gammas[2][c]) < 0)
return -1;
}
return 0;
}
int main(int argc, char* argv[])
{
FILE* output_file = stdout;
int tty_configured = 0, rc = 0, in_fork = 0;
struct termios saved_stty;
struct termios stty;
pid_t pid;
if ((argc > 2) || ((argc == 2) && (argv[1][0] == '-')))
{
printf("USAGE: %s [output-file]\n", *argv);
return 0;
}
if ((acquire_video() < 0) ||
(tcgetattr(STDIN_FILENO, &saved_stty) < 0) ||
(tcgetattr(STDIN_FILENO, &stty) < 0))
goto fail;
stty.c_lflag &= (tcflag_t)~(ICANON | ECHO);
if (tcsetattr(STDIN_FILENO, TCSAFLUSH, &stty) < 0)
goto fail;
tty_configured = 1;
printf("\033[?25l");
fflush(stdout);
pid = fork();
if ((pid != (pid_t)-1) && (pid != 0))
{
int status;
retry:
if (waitpid(pid, &status, 0) != (pid_t)-1)
rc = !!status;
else
{
if (errno != EINTR)
perror(*argv);
goto retry;
}
goto done;
}
else if (pid == 0)
in_fork = 1;
printf("\033[H\033[2J");
printf("Please deactivate any program that dynamically\n");
printf("applies filters to your monitors' colours\n");
printf("and remove any existing filters.\n");
printf("In doubt, you probably do not have any.\n");
printf("Do not try to calibrate CRT monitors will\n");
printf("they are cold.\n");
printf("\n");
printf("You will be presented with an image on each\n");
printf("monitor. Please use the control panel on your\n");
printf("to calibrate the contrast and brightness of\n");
printf("each monitor. The contrasts adjusts the\n");
printf("brightness of bright colours, and the\n");
printf("brightness adjusts the brightness of dim\n");
printf("colours. All rectangles are of equals size\n");
printf("and they should be distrint from eachother.\n");
printf("There should only be a slight difference\n");
printf("between the two darkest colours for each\n");
printf("colour. The grey colour does not need to\n");
printf("be perfectly grey but should be close.\n");
printf("The brightness should be as high as\n");
printf("possible without the first square being\n");
printf("any other colour than black or the two first\n");
printf("square being too distinct from eachother. The\n");
printf("contrast should be as high as possible without\n");
printf("causing distortion.\n");
printf("\n");
printf("Press ENTER to continue, and ENTER again when\n");
printf("your are done.\n");
fflush(stdout);
while (getchar() != 10)
;
printf("\033[H\033[2J");
fflush(stdout);
draw_contrast_brightness();
while (getchar() != 10)
;
printf("\033[H\033[2J");
printf("An index will be displayed on each monitor.\n");
printf("It behoves you to memorise them. They will\n");
printf("be used in the output when descibing the\n");
printf("calibrations, and is the index of the monitors\n");
printf("that are used when changing monitor to\n");
printf("calibrate.\n");
printf("\n");
printf("Press ENTER to continue, and ENTER again when\n");
printf("your are done.\n");
fflush(stdout);
while (getchar() != 10)
;
printf("\033[H\033[2J");
fflush(stdout);
if ((read_calibs() < 0) || (draw_id() < 0))
goto fail;
while (getchar() != 10)
;
if (apply_calibs() < 0)
goto fail;
printf("\033[H\033[2J");
printf("You will not be given the opportunity to.\n");
printf("calibrate your monitors' brightness and\n");
printf("contrast using software incase your monitors\n");
printf("could not be sufficiently calibrated using\n");
printf("hardware.\n");
printf("\n");
printf(" and is used to change which\n");
printf("monitor to calibrate. switches to the\n");
printf("previous monitor (one lower in index) and\n");
printf(" switches to the next monitor (one\n");
printf("higher in index.)\n");
printf(" and is used to increase and\n");
printf("descrease the settings. respectively.\n");
printf(" is used to switch to changing the.\n");
printf("monitor's brightness and switches\n");
printf("to contrast.\n");
printf(" is used to switch to changing the red.\n");
printf("channel, switches to the green channel,\n");
printf(" switches to the blue channel, and \n");
printf("is used to switch to change all channels.\n");
printf("\n");
printf("Press ENTER to continue, and ENTER again when\n");
printf("your are done.\n");
fflush(stdout);
while (getchar() != 10)
;
printf("\033[H\033[2J");
fflush(stdout);
draw_contrast_brightness();
{
int c, b = 0, at_contrast = 0;
int red = 1, green = 1, blue = 1;
size_t mon = 0;
while ((c = getchar()) != 10)
{
if (b)
{
b = 0;
if ((c == 'A') && at_contrast)
{
contrasts[0][mon] += (double)red / 100;
contrasts[1][mon] += (double)green / 100;
contrasts[2][mon] += (double)blue / 100;
}
else if (c == 'A')
{
brightnesses[0][mon] += (double)red / 100;
brightnesses[1][mon] += (double)green / 100;
brightnesses[2][mon] += (double)blue / 100;
}
else if ((c == 'B') && at_contrast)
{
contrasts[0][mon] -= (double)red / 100;
contrasts[1][mon] -= (double)green / 100;
contrasts[2][mon] -= (double)blue / 100;
}
else if (c == 'B')
{
brightnesses[0][mon] -= (double)red / 100;
brightnesses[1][mon] -= (double)green / 100;
brightnesses[2][mon] -= (double)blue / 100;
}
else if (c == 'C')
mon = (mon + 1) % crtc_count;
else if (c == 'D')
mon = (mon == 0 ? crtc_count : mon) - 1;
if ((c == 'A') || (c == 'B'))
apply_calibs();
}
else if (c == '[') b = 1;
else if (c == 'B') at_contrast = 0;
else if (c == 'C') at_contrast = 1;
else if (c == 'r') red = 1, green = 0, blue = 0;
else if (c == 'g') red = 0, green = 1, blue = 0;
else if (c == 'b') red = 0, green = 0, blue = 1;
else if (c == 'a') red = 1, green = 1, blue = 1;
}
}
printf("\033[H\033[2J");
printf("You will now be presented with squares used\n");
printf("to calibrate the gamma correction. There will\n");
printf("be four stacks: grey, red, green and blue.\n");
printf("Each stack has three squares: the upper square\n");
printf("shows the characterics of how the middle square\n");
printf("will look if the gamma is too high, and the\n");
printf("lower shows how the middile will look if the\n");
printf("gamma is too low. The middle square should\n");
printf("look like it is one single colour if the gamma\n");
printf("correction is configured correctly. You may\n");
printf("have to look from a distance or not focus\n");
printf("your eyes on the squares to compensate for\n");
printf("the fact that there actually multiple colours\n");
printf("is the square.\n");
printf("The grey should look perfectly grey when you\n");
printf("are done.\n");
printf("\n");
printf(" and is used to change which\n");
printf("monitor to calibrate. switches to the\n");
printf("previous monitor (one lower in index) and\n");
printf(" switches to the next monitor (one\n");
printf("higher in index.)\n");
printf(" and is used to increase and\n");
printf("descrease the gamma. respectively.\n");
printf(" is used to switch to changing the red.\n");
printf("channel, switches to the green channel,\n");
printf(" switches to the blue channel, and \n");
printf("is used to switch to change all channels.\n");
printf("\n");
printf("Press ENTER to continue, and ENTER again when\n");
printf("your are done.\n");
fflush(stdout);
while (getchar() != 10)
;
printf("\033[H\033[2J");
fflush(stdout);
draw_gamma();
{
int c, b = 0;
int red = 1, green = 1, blue = 1;
size_t mon = 0;
while ((c = getchar()) != 10)
{
if (b)
{
b = 0;
if (c == 'A')
{
gammas[0][mon] += (double)red / 100;
gammas[1][mon] += (double)green / 100;
gammas[2][mon] += (double)blue / 100;
}
else if (c == 'B')
{
gammas[0][mon] -= (double)red / 100;
gammas[1][mon] -= (double)green / 100;
gammas[2][mon] -= (double)blue / 100;
if (gammas[0][mon] < 0) gammas[0][mon] = 0;
if (gammas[1][mon] < 0) gammas[1][mon] = 0;
if (gammas[2][mon] < 0) gammas[2][mon] = 0;
}
else if (c == 'C')
mon = (mon + 1) % crtc_count;
else if (c == 'D')
mon = (mon == 0 ? crtc_count : mon) - 1;
if ((c == 'A') || (c == 'B'))
apply_calibs();
}
else if (c == '[') b = 1;
else if (c == 'r') red = 1, green = 0, blue = 0;
else if (c == 'g') red = 0, green = 1, blue = 0;
else if (c == 'b') red = 0, green = 0, blue = 1;
else if (c == 'a') red = 1, green = 1, blue = 1;
}
}
printf("\033[H\033[2J");
printf("The next step is to calibrate the monitors'\n");
printf("convergence settings using the monitors'\n");
printf("control panel. White dots will be printed on the\n");
printf("screens, you should try to get as many as\n");
printf("possible of them to appear as pure white dots\n");
printf("rather than dots splitted in the red, green and\n");
printf("blue dots. On most CRT monitors this is not\n");
printf("possible to get all corners perfect.\n");
printf("\n");
printf("Press ENTER to continue, and ENTER again when\n");
printf("your are done.\n");
fflush(stdout);
while (getchar() != 10)
;
printf("\033[H\033[2J");
fflush(stdout);
draw_convergence();
while (getchar() != 10)
;
printf("\033[H\033[2J");
printf("The final step is to calbirate the monitors' moiré\n");
printf("cancellation. This too is done on the using the\n");
printf("monitors' control panel.\n");
printf("\n");
printf("You can use and the arrow keys to change the\n");
printf("dot-pattern on the screens.\n");
printf("\n");
printf("Press ENTER to continue, and ENTER again when\n");
printf("your are done.\n");
fflush(stdout);
while (getchar() != 10)
;
printf("\033[H\033[2J");
fflush(stdout);
draw_moire(1, 1);
{
int c, b = 0, d = 1;
uint32_t gap = 1;
while ((c = getchar()) != 10)
{
if (b)
{
b = 0;
if ((c == 'A') || (c == 'C'))
draw_moire(++gap, d);
else if ((c == 'B') || (c == 'D'))
{
if (--gap == 0)
gap = 1;
draw_moire(gap, d);
}
}
else if (c == '[')
b = 1;
else if (c == 'd')
draw_moire(gap, d ^= 1);
}
}
printf("\033[H\033[2J");
fflush(stdout);
if (argc == 2)
{
output_file = fopen(argv[1], "w");
if (output_file == NULL)
goto fail;
}
if (save_calibs(output_file) < 0)
goto fail;
fflush(output_file);
if (argc == 2)
{
if (fclose(output_file))
goto fail;
}
done:
if (in_fork == 0)
{
release_video();
if (tty_configured)
tcsetattr(STDIN_FILENO, TCSAFLUSH, &saved_stty);
printf("\033[?25h");
fflush(stdout);
}
return rc;
fail:
perror(*argv);
rc = 1;
goto done;
}