path: root/examples/comprehensive

# -*- python -*-

# This example is complete with exceptions for less normal colour
# curve modifiers: nothing else than CIE 1964 10 degree CMF for
# colour temperature, not use of temporarly linear RGB curves,
# negative image, sigmoid correction, or free function modifier.


# Geographical coodinates.
# (KTH computer laboratories in this example.)
latitude, longitude = 59.3472, 18.0728

# Custom dayness by time settings
time_alpha = [['02:00', 0], ['08:00', 1], ['22:00', 1]]


def by_time():
    '''
    Dayness calculation using time
    '''
    global time_alpha
    if isinstance(time_alpha[0][0], str):
        for i in range(len(time_alpha)):
            hh = [float(x) for x in time_alpha[i][0].split(':')]
            hh = sum([hh[j] / 60 ** j for j in range(len(hh))])
            time_alpha[i][0] = hh
    now = datetime.datetime.now()
    hh = now.hour + now.minute / 60 + now.second / 60 ** 2
    for i in range(len(time_alpha)):
        (a, av) = time_alpha[i]
        (b, bv) = time_alpha[(i + 1) % len(time_alpha)]
        if a < hh:  a += 24
        if b < hh:  b += 24
        if a <= hh <= b:
            hh = (hh - a) / (b - a)
            return av * (1 - hh) + bv * hh
    return 1 # Error in `time_alpha` (probably)


# Keep uncomment to use solar position
get_dayness = lambda : sun(latitude, longitude)
# Uncomment to use time of day
#get_dayness = by_time
# Uncomment if you do not want continuous mode, high night values are used
#get_dayness = None


# The (zero-based) index of the monitors (CRTC:s) to apply
# settings to. An empty list means that all monitors are used,
# but all monitors will have the same settings.
monitors = []


# The following settings are lists. This is to allow you to
# use different settings on different monitors. For example,
# `gamma_red_day = [1]`, this means that during high day, the
# red gamma is 1 on all monitors. But if we change this to
# `gamma_red_day = [1.0, 1.1]`, the first monitor will have
# the red gamma set to 1,0 and the second monitor will have
# the red gamma set to 1,1. If you have more monitors than
# used in the settings modulo division will be used. For
# instance, if you have four monitors, the third monitor will
# have the same settings as the first monitor, and the fourth
# monitor will have the same settings as the second monitor.


# Colour temperature at high day and high night, respectively.
temperature_day, temperature_night = [6500], [3700]


# Colour brightness at high day and high night, respectively.
# This setting uses the CIE xyY colour space for calculating values.
brightness_day, brightness_night = [1], [1]

# Colour brightness of the red, green and blue components,
# respectively, at high day and high night, respectively.
# This settings uses the sRGB colour space for calculating values.
brightness_red_day, brightness_red_night = [1], [1]
brightness_green_day, brightness_green_night = [1], [1]
brightness_blue_day, brightness_blue_night = [1], [1]


# Colour contrast at high day and high night, respectively.
# This setting uses the CIE xyY colour space for calculating values.
contrast_day, contrast_night = [1], [1]

# Colour contrast of the red, green and blue components,
# respectively, at high day and high night, respectively.
# This settings uses the sRGB colour space for calculating values.
contrast_red_day, contrast_red_night = [1], [1]
contrast_green_day, contrast_green_night = [1], [1]
contrast_blue_day, contrast_blue_night = [1], [1]


# Note: brightness and contrast is not intended for colour
# calibration, it should be calibrated on the monitors'
# control panels.


# Gamma correction for the red, green and blue components, respectively,
# at high day, high night and monitor default, respectively.
# This settings uses the sRGB colour space for calculating values.
gamma_red_day, gamma_red_night, gamma_red_default = [1], [1], [1]
gamma_green_day, gamma_green_night, gamma_green_default = [1], [1], [1]
gamma_blue_day, gamma_blue_night, gamma_blue_default = [1], [1], [1]


# Note: gamma is supposted to be static, it purpose is to
# correct the colours on the monitors the monitor's gamma
# is exactly 2,2 and the colours look correct in relation
# too each other. It is supported to have different settings
# at day and night because there are no technical limitings
# and it can presumable increase readability on text when
# the colour temperature is low.


monitor_controller = lambda : randr(*monitors)
'''
:()→void  Function used by Blueshift on exit to apply reset colour curves, if using preimplemented `reset`
'''


def periodically(year, month, day, hour, minute, second, weekday, fade):
    '''
    :(int, int, int, int, int, int, int, float?)?→void  Place holder for periodically invoked function
    
    Invoked periodically
    
    If you want to control at what to invoke this function next time
    you can set the value of the global variable `wait_period` to the
    number of seconds to wait before invoking this function again.
    The value does not need to be an integer.
    
    @param   year:int     The year
    @param   month:int    The month, 1 = January, 12 = December
    @param   day:int      The day, minimum value is 1, probable maximum value is 31 (*)
    @param   hour:int     The hour, minimum value is 0, maximum value is 23
    @param   minute:int   The minute, minimum value is 0, maximum value is 59
    @param   second:int   The second, minimum value is 0, probable maximum value is 60 (**)
    @param   weekday:int  The weekday, 1 = Monday, 7 = Sunday
    @param   fade:float?  Blueshift can use this function to fade into a state when it start
                          or exits. `fade` can either be negative, zero or positive or `None`,
                          but the magnitude of value cannot exceed 1. When Blueshift starts,
                          the this function will be invoked multiple with the time parameters
                          of the time it is invoked and each time `fade` will increase towards
                          1, starting at 0, when the value is 1, the settings should be applied
                          to 100 %. After this this function will be invoked once again with
                         `fade` being `None`. When Blueshift exits the same behaviour is used
                          except, `fade` decrease towards -1 but start slightly below 0, when
                          -1 is reached all settings should be normal. Then Blueshift will NOT
                          invoke this function with `fade` being `None`, instead it will by
                          itself revert all settings and quit.
    
    (*)  Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30
    (**) See https://en.wikipedia.org/wiki/Leap_second
    '''
    dayness = get_dayness()
    
    # Help functions for colour interpolation
    interpol = lambda _day, _night : _day[m % len(_day)] * dayness + _night[m % len(_night)] * (1 - dayness)
    purify = lambda current, pure : current * alpha + pure * (1 - alpha)
    
    for m in [0] if len(monitors) == 0 else monitors:
        temperature_      = interpol(temperature_day,      temperature_night)
        brightness_       = interpol(brightness_day,       brightness_night)
        brightness_red_   = interpol(brightness_red_day,   brightness_red_night)
        brightness_green_ = interpol(brightness_green_day, brightness_green_night)
        brightness_blue_  = interpol(brightness_blue_day,  brightness_blue_night)
        contrast_         = interpol(contrast_day,         contrast_night)
        contrast_red_     = interpol(contrast_red_day,     contrast_red_night)
        contrast_green_   = interpol(contrast_green_day,   contrast_green_night)
        contrast_blue_    = interpol(contrast_blue_day,    contrast_blue_night)
        gamma_red_        = interpol(gamma_red_day,        gamma_red_night)
        gamma_green_      = interpol(gamma_green_day,      gamma_green_night)
        gamma_blue_       = interpol(gamma_blue_day,       gamma_blue_night)
        if fade is not None:
            alpha = abs(fade)
            temperature_      = purify(temperature_,      6500)
            brightness_       = purify(brightness_,       1)
            brightness_red_   = purify(brightness_red_,   1)
            brightness_green_ = purify(brightness_green_, 1)
            brightness_blue_  = purify(brightness_blue_,  1)
            contrast_         = purify(contrast_,         1)
            contrast_red_     = purify(contrast_red_,     1)
            contrast_green_   = purify(contrast_green_,   1)
            contrast_blue_    = purify(contrast_blue_,    1)
            gamma_red_        = purify(gamma_red_,        gamma_red_default  [m % len(gamma_red_default)])
            gamma_green_      = purify(gamma_green_,      gamma_green_default[m % len(gamma_green_default)])
            gamma_blue_       = purify(gamma_blue_,       gamma_blue_default [m % len(gamma_blue_default)])
        
        # Remove settings from last run.
        start_over()
        
        # Apply colour temperature using raw CIE 1964 10 degree CMF data with interpolation.
        temperature(temperature_, lambda t : divide_by_maximum(cmf_10deg(t)))
        
        # Apply colour brightness using the CIE xyY colour space.
        cie_brightness(brightness_)
        # Apply colour brightness using the sRGB colour space.
        # If we only used one parameter, it would be applied to all colour components.
        rgb_brightness(brightness_red_, brightness_green_, brightness_blue_)
        
        # Apply colour contrast using the CIE xyY colour space.
        cie_contrast(contrast_)
        # Apply colour contrast using the sRGB colour space.
        # If we only used one parameter, it would be applied to all colour components.
        rgb_contrast(contrast_red_, contrast_green_, contrast_blue_)
        
        # Clip colour curves to fit [0, 1] to avoid errors by complex numbers.
        clip()
        
        # Apply gamma correction to monitor.
        gamma(gamma_red_, gamma_green_, gamma_blue_)
        
        # Flush settings to monitor.
        if len(monitors) == 0:
            randr()
        else:
            randr(m)


def reset():
    '''
    Invoked to reset the displays
    '''
    for m in [0] if len(monitors) == 0 else monitors:
        gamma_red_   = gamma_red_default  [m % len(gamma_red_default)]
        gamma_green_ = gamma_green_default[m % len(gamma_green_default)]
        gamma_blue_  = gamma_blue_default [m % len(gamma_blue_default)]
        
        # Remove settings from last run.
        start_over()
        
        # Apply gamma correction to monitor.
        gamma(gamma_red_, gamma_green_, gamma_blue_)
        
        # Flush settings to monitor.
        if len(monitors) == 0:
            randr()
        else:
            randr(m)


if get_dayness is not None:
    # Set transition time, 0 on high day and 5 seconds on high night
    fadein_time = 5 * (1 - get_dayness())
    # Do 10 changes per second
    fadein_steps = fadein_time * 10
    
    # Transition on exit in the same way, calculated on exit
    old_signal_SIGTERM = signal_SIGTERM
    def signal_SIGTERM(signum, frame):
        global fadeout_time, fadeout_steps
        fadeout_time = 5 * (1 - get_dayness())
        fadeout_steps = fadeout_time * 10
        old_signal_SIGTERM(signum, frame)
else:
    # Do not use continuous mode
    get_dayness = lambda : 0
    def apply(fade):
        t = datetime.datetime.now()
        wd = t.isocalendar()[2]
        periodically(t.year, t.month, t.day, t.hour, t.minute, t.second, wd, fade)
    if not panicgate:
        signal.signal(signal.SIGTERM, signal_SIGTERM)
        trans = 0
        apply(trans)
        while running:
            time.sleep(0.1)
            if trans >= 1:
                break
            trans += 0.05
            apply(trans)
    apply(None)
    periodically = None