; Copyright © 2014 Mattias Andrée (maandree@member.fsf.org) ; ; Permission is granted to copy, distribute and/or modify this document ; under the terms of the GNU Free Documentation License, Version 1.3 ; or any later version published by the Free Software Foundation; ; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. ; You should have received a copy of the GNU General Public License ; along with this software package. If not, see <http://www.gnu.org/licenses/>. ; Lines starting with either ; (semicolon) or # (pound) are comments. ; Both = (equal sign) and : (colon) are valid key–value delimiters. [blueshift] ; General settings and adjustments shared between monitors adjustment-method-x = randr ; (default) vidmode is also available ; This is the method used to set and get colour curves for monitors ; when running in X. adjustment-method-tty = drm ; (default) ; This is the method used to set and get colour curves for monitors ; when running in TTY. location = 59.3326 18.0652 ; Your geographical location as GPS coordinates in decimal form. If you ; are on the south hemisphere the first value should be negative, if you ; are on the west side of the prime meridian (the Greenwich meridian). ; If you are not sure about your location you probably find it in your ; online phone book or on Wikipedia. ; ("Kristall, vertikal accent i glas och stål" (Crystal, vertical accent ; in glass and steal) in this example. A glass obelisk, lit from the inside ; with adjustable colours and a default colour of 5600 K, in the middle ; of a hyperelliptic roundabout.) ;location = 59.3326$(locateme | cut d ' ' -f 1) 18.0652$(locateme | cut d ' ' -f 2) ; Just loke above, but use the values as fallback and use the output ; of the command `locateme` primarily. points = solar 3 -6 ; (default) ; Adjustment settings have up to two values, one for when the Sun's ; elevation is above 3° (day) and one for when it is below −6° (night). ;points = solar -18 -12 -6 0 6 ; Adjustment settings have up to five values that depend on the Sun's ; elevation: at and below −18°, at −12°, at −6°, at 0° and at and above ; 6°. Interpolation of values are used between these points to give nice ; transitions. ;points = solar -18 0 3 6 reduce ; Adjustment settings have up to two values. When the Sun's elevation is ; at or below −18° the first value is used, when it is at or above 6° the ; second value is used. Between −18° and 6° interpolation is used to give ; nice transitions: at 0° two thirds of the first value and one third of ; the second value is used, and at 3° on third of the first value and two ; thirds of the second value is used. ;point = time 6:00 10:00 20:00 ; Adjustment settings have up to three values. At 6:00 the first value is ; used, at 10:00 the second value is used and at 20:00 the third value is ; used. Between 6:00 and 10:00 interpolation between first and second ; value is used, between 10:00 and 20:00 interpolation between the second ; and third valu is used, and between 20:00 and 4:00 interpolation between ; the third and first value is used. ;points = time 6:00 10:00 20:00 reduce ; Adjustment settings have up to two values. At 6:00 the first value is ; used, and at 20:00 the second setting is used. Interpolation is used ; between between 20:00 and 6:00, but between 6:00 and 20:00 interpolation ; is used with the adjustment that both the first and the second value ; is used to 50 % each at 10:00. ; TODO: the following should be possible ; points = solar -18 (0) 3 (6) 12 reduce ; points = time 6:00 (10:00) 20:00 reduce ; points = time 6:00 (10:00) 20:00 (2:00) reduce ; For the following settings you can also add the word ‘linear’, just ; as ‘cie’ can be used on some settings. ‘linear’ (which is supported ; on all adjustments) performs the adjustments in linear RGB colour ; space. ‘cie’ (which is only supported where used in this example) ; performs the adjustments in CIE xyY colour space. ‘linear’ and ‘cie’ ; can be combined but should not be combined as it has no proper meaning. ; Additional, while possible, ‘linear’ should not be used with ‘icc’, ; as that too has no proper meaning. ; All of this adjustments can have multiple values, but in this example ; only ‘temperature’ uses this. We have set “points = solar 3 -6”, which ; means that the first setting is used during the day and the second is ; used between civil dusk and civil dawn (night). The other settings ; only use one value (in this example) which means that those apply all ; day long. ; The order of adjustments are made in the order they are listed. which ; means that putting gamma before temperature produces another result ; than putting temperature before gamma. Monitor specific adjustments ; are made after these adjustments. temperature = 6500 3600 ; 6500 K (neutral) during the day, and 3600 during the night. ;contrast = 0.5 ; Converge white and black both halfways to 50 % grey. ;contrast = 1:1:0.5 cie ; Converge white and black both halfways to 50 % grey, ; but only on the blue channel. ;brightness = 0.75 ; Reduce the brightness of the white colour to 75 % grey. ;brightness = 1:0.75:1 cie ; Reduce the brightness of the white colour to 75 % grey, ; but only on the green channel. ;negative = 1 ; Apply a negative image filter, this reverses the ; encoding values. ;negative = 1:0:0 ; Apply a negative image filter on the red channel. ;invert = 0:1:1 ; Apply an image inversion filter, this inverts the ; output values. But do not do it on the red channel. ;invert = 1 cie ; Apply an image inversion filter. ;sigmoid = 4.5 ; Apply a sigmoid curve (S-curve) correction ; (cancellation) with a multiplier level of 4,5. ;sigmoid = 4.5:none:4.5 ; Apply a sigmoid curve correction with a multiplier ; level of 4,5, but not on the green channel. ;gamma = 1.1 ; Apply a gamma filter/correction of level 1,1. ;gamma = 1.2:1.2:1 ; Apply a gamma filter/correction of level 1,2, ; but not on the blue channel. ;limits = 0.1..0.9 ; Apply a brightness–contrast correction of 90 % black ; (black is 0; first parameter) and 90 % white (white ; is 1; second parameter.) ;limits = 0:0.1:0.1..1:0.9:0.9 cie ; Apply a brightness–contrast correction of 90 % black ; and 90 % white, but not on the red channel. ;icc = /home/user/.config/icc/filter ; Apply an ICC profile with the pathname ; ‘/home/user/.config/icc/filter’. ;backlight = 1 ; Apply backlight adjustment. This requires that ; the backlight device has been specified. ; Here begins monitor identification and specific ; specifc calibrations/filters for the primary monitor. [monitor 0] ; Adjustment method independent settings for monitor 0 gamma = 1.16:1.15:1.11 default ; Gamma correction of 1.16 on red, 1.15 on green and 1.11 on blue. ; ‘default’ is used so that this correction is used when at the ; beginning of a transition from a clean state to a state with ; the adjustments in effect, at which time these adjustments will ; still apply. backlight-device = none ; Device in ‘/sys/class/backlight/’ used to control the ; backlight of the monitor. ‘none’ if no controller. backlight-minimum = 0 ; (default) ; Artificial minimum backlight value that can be used in ; ‘/sys/class/backlight/${backlight-device}/brightness’. ; Some devices freezes at if the value is top low so that ; the computer needs to be restarted. This can used so ; that it does not happen. edid = 00ffffffffffff0010ac00504d5730372f0c01030e281e962b0cc9a057479b2712484ca44380a959a94f615971594559c28f31590101863d00c05100304040a013006c231100001e000000fd0030aa1e821d000a202020202020000000fc0044454c4c2050313133300a2020000000ff00364432353232424c3730574d0a00ea ; The monitor's extended display identification data. [randr] ; RandR specific information for monitor 0 monitor=0 ; Include [monitor 0] ;crtc=0 ; CRTC 0 ;screen=0 ; in screen 0 ;name=DVI-0 ; The name of the connector as give by X RandR [drm] ; DRM specific information for monitor 0 monitor=0 ; Include [monitor 0] ;crtc=1 ; CRTC 1 ;card=0 ; on graphics card 0 ;name=DVII-0 ; The name of the connector as give Blueshift's DRM (not as given by Linux) ; Here begins monitor identification and specific ; specifc calibrations/filters for the secondary monitor. [monitor 1] ; Adjustment method independent settings for monitor 1 gamma = 1.10:1.16:1.10 default backlight-device = none backlight-minimum = 0 edid = 00ffffffffffff0010ac005045413035320c01030e281e962b0cc9a057479b2712484ca44380a959a94f615971594559c28f31590101863d00c05100304040a013006c231100001e000000fd0030aa1e821d000a202020202020000000fc0044454c4c2050313133300a2020000000ff003644323532324339353041450a0039 [randr] ; RandR specific information for monitor 1 monitor=1 ; Include [monitor 1] ;crtc=1 ; CRTC 1 ;screen=0 ; in screen 0 ;name=VGA-0 ; The name of the connector as give by X RandR [drm] ; DRM specific information for monitor 1 monitor=1 ; Include [monitor 1] ;crtc=0 ; CRTC 0 ;card=0 ; on graphics card 0 ;name=VGA-0 ; The name of the connector as give Blueshift's DRM (not as given by Linux)