From 9ed04886b05f30a135385e84ed7f0c618a3a8ab1 Mon Sep 17 00:00:00 2001 From: Mattias Andrée Date: Thu, 27 Mar 2014 17:10:18 +0100 Subject: m doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Mattias Andrée --- examples/backlight | 40 +++++++++++++++++++--------------------- examples/battery | 40 +++++++++++++++++++--------------------- examples/bedtime | 40 +++++++++++++++++++--------------------- examples/comprehensive | 40 +++++++++++++++++++--------------------- examples/sleepmode | 40 +++++++++++++++++++--------------------- examples/textconf | 40 +++++++++++++++++++--------------------- examples/threaded | 40 +++++++++++++++++++--------------------- examples/xmonad | 40 +++++++++++++++++++--------------------- src/__main__.py | 38 +++++++++++++++++++------------------- 9 files changed, 171 insertions(+), 187 deletions(-) diff --git a/examples/backlight b/examples/backlight index 525948b..9c8ff52 100644 --- a/examples/backlight +++ b/examples/backlight @@ -60,8 +60,6 @@ wait_period = 0.1 cycle, adj, last = 0, 1, controller.brightness def periodically(year, month, day, hour, minute, second, weekday, fade): ''' - :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function - Invoked periodically If you want to control at what to invoke this function next time @@ -69,25 +67,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade): number of seconds to wait before invoking this function again. The value does not need to be an integer. - @param year:int The year - @param month:int The month, 1 = January, 12 = December - @param day:int The day, minimum value is 1, probable maximum value is 31 (*) - @param hour:int The hour, minimum value is 0, maximum value is 23 - @param minute:int The minute, minimum value is 0, maximum value is 59 - @param second:int The second, minimum value is 0, probable maximum value is 60 (**) - @param weekday:int The weekday, 1 = Monday, 7 = Sunday - @param fade:float? Blueshift can use this function to fade into a state when it start - or exits. `fade` can either be negative, zero or positive or `None`, - but the magnitude of value cannot exceed 1. When Blueshift starts, - this function will be invoked multiple with the time parameters - of the time it is invoked and each time `fade` will increase towards - 1, starting at 0, when the value is 1, the settings should be applied - to 100 %. After this this function will be invoked once again with - `fade` being `None`. When Blueshift exits the same behaviour is used - except, `fade` decrease towards -1 but start slightly below 0, when - -1 is reached all settings should be normal. Then Blueshift will NOT - invoke this function with `fade` being `None`, instead it will by - itself revert all settings and quit. + @param year:int The year + @param month:int The month, 1 = January, 12 = December + @param day:int The day, minimum value is 1, probable maximum value is 31 (*) + @param hour:int The hour, minimum value is 0, maximum value is 23 + @param minute:int The minute, minimum value is 0, maximum value is 59 + @param second:int The second, minimum value is 0, probable maximum value is 60 (**) + @param weekday:int The weekday, 1 = Monday, 7 = Sunday + @param fade:float? Blueshift can use this function to fade into a state when it start + or exits. `fade` can either be negative, zero or positive or `None`, + but the magnitude of value cannot exceed 1. When Blueshift starts, + this function will be invoked multiple with the time parameters + of the time it is invoked and each time `fade` will increase towards + 1, starting at 0, when the value is 1, the settings should be applied + to 100 %. After this this function will be invoked once again with + `fade` being `None`. When Blueshift exits the same behaviour is used + except, `fade` decrease towards -1 but start slightly below 0, when + -1 is reached all settings should be normal. Then Blueshift will NOT + invoke this function with `fade` being `None`, instead it will by + itself revert all settings and quit. (*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30 (**) See https://en.wikipedia.org/wiki/Leap_second diff --git a/examples/battery b/examples/battery index 4f333f4..118f64c 100644 --- a/examples/battery +++ b/examples/battery @@ -65,8 +65,6 @@ fadein_time = None def periodically(year, month, day, hour, minute, second, weekday, fade): ''' - :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function - Invoked periodically If you want to control at what to invoke this function next time @@ -74,25 +72,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade): number of seconds to wait before invoking this function again. The value does not need to be an integer. - @param year:int The year - @param month:int The month, 1 = January, 12 = December - @param day:int The day, minimum value is 1, probable maximum value is 31 (*) - @param hour:int The hour, minimum value is 0, maximum value is 23 - @param minute:int The minute, minimum value is 0, maximum value is 59 - @param second:int The second, minimum value is 0, probable maximum value is 60 (**) - @param weekday:int The weekday, 1 = Monday, 7 = Sunday - @param fade:float? Blueshift can use this function to fade into a state when it start - or exits. `fade` can either be negative, zero or positive or `None`, - but the magnitude of value cannot exceed 1. When Blueshift starts, - this function will be invoked multiple with the time parameters - of the time it is invoked and each time `fade` will increase towards - 1, starting at 0, when the value is 1, the settings should be applied - to 100 %. After this this function will be invoked once again with - `fade` being `None`. When Blueshift exits the same behaviour is used - except, `fade` decrease towards -1 but start slightly below 0, when - -1 is reached all settings should be normal. Then Blueshift will NOT - invoke this function with `fade` being `None`, instead it will by - itself revert all settings and quit. + @param year:int The year + @param month:int The month, 1 = January, 12 = December + @param day:int The day, minimum value is 1, probable maximum value is 31 (*) + @param hour:int The hour, minimum value is 0, maximum value is 23 + @param minute:int The minute, minimum value is 0, maximum value is 59 + @param second:int The second, minimum value is 0, probable maximum value is 60 (**) + @param weekday:int The weekday, 1 = Monday, 7 = Sunday + @param fade:float? Blueshift can use this function to fade into a state when it start + or exits. `fade` can either be negative, zero or positive or `None`, + but the magnitude of value cannot exceed 1. When Blueshift starts, + this function will be invoked multiple with the time parameters + of the time it is invoked and each time `fade` will increase towards + 1, starting at 0, when the value is 1, the settings should be applied + to 100 %. After this this function will be invoked once again with + `fade` being `None`. When Blueshift exits the same behaviour is used + except, `fade` decrease towards -1 but start slightly below 0, when + -1 is reached all settings should be normal. Then Blueshift will NOT + invoke this function with `fade` being `None`, instead it will by + itself revert all settings and quit. (*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30 (**) See https://en.wikipedia.org/wiki/Leap_second diff --git a/examples/bedtime b/examples/bedtime index eff08d2..23ebec9 100644 --- a/examples/bedtime +++ b/examples/bedtime @@ -202,8 +202,6 @@ def get_bedness(time): last_dayness, last_bedness = -1, -1 def periodically(year, month, day, hour, minute, second, weekday, fade): ''' - :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function - Invoked periodically If you want to control at what to invoke this function next time @@ -211,25 +209,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade): number of seconds to wait before invoking this function again. The value does not need to be an integer. - @param year:int The year - @param month:int The month, 1 = January, 12 = December - @param day:int The day, minimum value is 1, probable maximum value is 31 (*) - @param hour:int The hour, minimum value is 0, maximum value is 23 - @param minute:int The minute, minimum value is 0, maximum value is 59 - @param second:int The second, minimum value is 0, probable maximum value is 60 (**) - @param weekday:int The weekday, 1 = Monday, 7 = Sunday - @param fade:float? Blueshift can use this function to fade into a state when it start - or exits. `fade` can either be negative, zero or positive or `None`, - but the magnitude of value cannot exceed 1. When Blueshift starts, - this function will be invoked multiple with the time parameters - of the time it is invoked and each time `fade` will increase towards - 1, starting at 0, when the value is 1, the settings should be applied - to 100 %. After this this function will be invoked once again with - `fade` being `None`. When Blueshift exits the same behaviour is used - except, `fade` decrease towards -1 but start slightly below 0, when - -1 is reached all settings should be normal. Then Blueshift will NOT - invoke this function with `fade` being `None`, instead it will by - itself revert all settings and quit. + @param year:int The year + @param month:int The month, 1 = January, 12 = December + @param day:int The day, minimum value is 1, probable maximum value is 31 (*) + @param hour:int The hour, minimum value is 0, maximum value is 23 + @param minute:int The minute, minimum value is 0, maximum value is 59 + @param second:int The second, minimum value is 0, probable maximum value is 60 (**) + @param weekday:int The weekday, 1 = Monday, 7 = Sunday + @param fade:float? Blueshift can use this function to fade into a state when it start + or exits. `fade` can either be negative, zero or positive or `None`, + but the magnitude of value cannot exceed 1. When Blueshift starts, + this function will be invoked multiple with the time parameters + of the time it is invoked and each time `fade` will increase towards + 1, starting at 0, when the value is 1, the settings should be applied + to 100 %. After this this function will be invoked once again with + `fade` being `None`. When Blueshift exits the same behaviour is used + except, `fade` decrease towards -1 but start slightly below 0, when + -1 is reached all settings should be normal. Then Blueshift will NOT + invoke this function with `fade` being `None`, instead it will by + itself revert all settings and quit. (*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30 (**) See https://en.wikipedia.org/wiki/Leap_second diff --git a/examples/comprehensive b/examples/comprehensive index daaa626..b164212 100644 --- a/examples/comprehensive +++ b/examples/comprehensive @@ -279,8 +279,6 @@ sigmoid_ = list(zip(sigmoid_red, sigmoid_green, sigmoid_blue)) icc_video_filter_profile = [None] * len(icc_video_filter_profile_day) def periodically(year, month, day, hour, minute, second, weekday, fade): ''' - :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function - Invoked periodically If you want to control at what to invoke this function next time @@ -288,25 +286,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade): number of seconds to wait before invoking this function again. The value does not need to be an integer. - @param year:int The year - @param month:int The month, 1 = January, 12 = December - @param day:int The day, minimum value is 1, probable maximum value is 31 (*) - @param hour:int The hour, minimum value is 0, maximum value is 23 - @param minute:int The minute, minimum value is 0, maximum value is 59 - @param second:int The second, minimum value is 0, probable maximum value is 60 (**) - @param weekday:int The weekday, 1 = Monday, 7 = Sunday - @param fade:float? Blueshift can use this function to fade into a state when it start - or exits. `fade` can either be negative, zero or positive or `None`, - but the magnitude of value cannot exceed 1. When Blueshift starts, - this function will be invoked multiple with the time parameters - of the time it is invoked and each time `fade` will increase towards - 1, starting at 0, when the value is 1, the settings should be applied - to 100 %. After this this function will be invoked once again with - `fade` being `None`. When Blueshift exits the same behaviour is used - except, `fade` decrease towards -1 but start slightly below 0, when - -1 is reached all settings should be normal. Then Blueshift will NOT - invoke this function with `fade` being `None`, instead it will by - itself revert all settings and quit. + @param year:int The year + @param month:int The month, 1 = January, 12 = December + @param day:int The day, minimum value is 1, probable maximum value is 31 (*) + @param hour:int The hour, minimum value is 0, maximum value is 23 + @param minute:int The minute, minimum value is 0, maximum value is 59 + @param second:int The second, minimum value is 0, probable maximum value is 60 (**) + @param weekday:int The weekday, 1 = Monday, 7 = Sunday + @param fade:float? Blueshift can use this function to fade into a state when it start + or exits. `fade` can either be negative, zero or positive or `None`, + but the magnitude of value cannot exceed 1. When Blueshift starts, + this function will be invoked multiple with the time parameters + of the time it is invoked and each time `fade` will increase towards + 1, starting at 0, when the value is 1, the settings should be applied + to 100 %. After this this function will be invoked once again with + `fade` being `None`. When Blueshift exits the same behaviour is used + except, `fade` decrease towards -1 but start slightly below 0, when + -1 is reached all settings should be normal. Then Blueshift will NOT + invoke this function with `fade` being `None`, instead it will by + itself revert all settings and quit. (*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30 (**) See https://en.wikipedia.org/wiki/Leap_second diff --git a/examples/sleepmode b/examples/sleepmode index 8713b63..d633f27 100644 --- a/examples/sleepmode +++ b/examples/sleepmode @@ -68,8 +68,6 @@ wait_period = 60 * 60 def periodically(year, month, day, hour, minute, second, weekday, fade): ''' - :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function - Invoked periodically If you want to control at what to invoke this function next time @@ -77,25 +75,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade): number of seconds to wait before invoking this function again. The value does not need to be an integer. - @param year:int The year - @param month:int The month, 1 = January, 12 = December - @param day:int The day, minimum value is 1, probable maximum value is 31 (*) - @param hour:int The hour, minimum value is 0, maximum value is 23 - @param minute:int The minute, minimum value is 0, maximum value is 59 - @param second:int The second, minimum value is 0, probable maximum value is 60 (**) - @param weekday:int The weekday, 1 = Monday, 7 = Sunday - @param fade:float? Blueshift can use this function to fade into a state when it start - or exits. `fade` can either be negative, zero or positive or `None`, - but the magnitude of value cannot exceed 1. When Blueshift starts, - this function will be invoked multiple with the time parameters - of the time it is invoked and each time `fade` will increase towards - 1, starting at 0, when the value is 1, the settings should be applied - to 100 %. After this this function will be invoked once again with - `fade` being `None`. When Blueshift exits the same behaviour is used - except, `fade` decrease towards -1 but start slightly below 0, when - -1 is reached all settings should be normal. Then Blueshift will NOT - invoke this function with `fade` being `None`, instead it will by - itself revert all settings and quit. + @param year:int The year + @param month:int The month, 1 = January, 12 = December + @param day:int The day, minimum value is 1, probable maximum value is 31 (*) + @param hour:int The hour, minimum value is 0, maximum value is 23 + @param minute:int The minute, minimum value is 0, maximum value is 59 + @param second:int The second, minimum value is 0, probable maximum value is 60 (**) + @param weekday:int The weekday, 1 = Monday, 7 = Sunday + @param fade:float? Blueshift can use this function to fade into a state when it start + or exits. `fade` can either be negative, zero or positive or `None`, + but the magnitude of value cannot exceed 1. When Blueshift starts, + this function will be invoked multiple with the time parameters + of the time it is invoked and each time `fade` will increase towards + 1, starting at 0, when the value is 1, the settings should be applied + to 100 %. After this this function will be invoked once again with + `fade` being `None`. When Blueshift exits the same behaviour is used + except, `fade` decrease towards -1 but start slightly below 0, when + -1 is reached all settings should be normal. Then Blueshift will NOT + invoke this function with `fade` being `None`, instead it will by + itself revert all settings and quit. (*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30 (**) See https://en.wikipedia.org/wiki/Leap_second diff --git a/examples/textconf b/examples/textconf index 9f9d778..38c56a2 100644 --- a/examples/textconf +++ b/examples/textconf @@ -477,8 +477,6 @@ for sb in saved_backlight_: def periodically(year, month, day, hour, minute, second, weekday, fade): ''' - :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function - Invoked periodically If you want to control at what to invoke this function next time @@ -486,25 +484,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade): number of seconds to wait before invoking this function again. The value does not need to be an integer. - @param year:int The year - @param month:int The month, 1 = January, 12 = December - @param day:int The day, minimum value is 1, probable maximum value is 31 (*) - @param hour:int The hour, minimum value is 0, maximum value is 23 - @param minute:int The minute, minimum value is 0, maximum value is 59 - @param second:int The second, minimum value is 0, probable maximum value is 60 (**) - @param weekday:int The weekday, 1 = Monday, 7 = Sunday - @param fade:float? Blueshift can use this function to fade into a state when it start - or exits. `fade` can either be negative, zero or positive or `None`, - but the magnitude of value cannot exceed 1. When Blueshift starts, - this function will be invoked multiple with the time parameters - of the time it is invoked and each time `fade` will increase towards - 1, starting at 0, when the value is 1, the settings should be applied - to 100 %. After this this function will be invoked once again with - `fade` being `None`. When Blueshift exits the same behaviour is used - except, `fade` decrease towards -1 but start slightly below 0, when - -1 is reached all settings should be normal. Then Blueshift will NOT - invoke this function with `fade` being `None`, instead it will by - itself revert all settings and quit. + @param year:int The year + @param month:int The month, 1 = January, 12 = December + @param day:int The day, minimum value is 1, probable maximum value is 31 (*) + @param hour:int The hour, minimum value is 0, maximum value is 23 + @param minute:int The minute, minimum value is 0, maximum value is 59 + @param second:int The second, minimum value is 0, probable maximum value is 60 (**) + @param weekday:int The weekday, 1 = Monday, 7 = Sunday + @param fade:float? Blueshift can use this function to fade into a state when it start + or exits. `fade` can either be negative, zero or positive or `None`, + but the magnitude of value cannot exceed 1. When Blueshift starts, + this function will be invoked multiple with the time parameters + of the time it is invoked and each time `fade` will increase towards + 1, starting at 0, when the value is 1, the settings should be applied + to 100 %. After this this function will be invoked once again with + `fade` being `None`. When Blueshift exits the same behaviour is used + except, `fade` decrease towards -1 but start slightly below 0, when + -1 is reached all settings should be normal. Then Blueshift will NOT + invoke this function with `fade` being `None`, instead it will by + itself revert all settings and quit. (*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30 (**) See https://en.wikipedia.org/wiki/Leap_second diff --git a/examples/threaded b/examples/threaded index a7ea730..1fb1c65 100644 --- a/examples/threaded +++ b/examples/threaded @@ -153,8 +153,6 @@ for m in range(len(gamma_red)): last_dayness = None def periodically(year, month, day, hour, minute, second, weekday, fade): ''' - :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function - Invoked periodically If you want to control at what to invoke this function next time @@ -162,25 +160,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade): number of seconds to wait before invoking this function again. The value does not need to be an integer. - @param year:int The year - @param month:int The month, 1 = January, 12 = December - @param day:int The day, minimum value is 1, probable maximum value is 31 (*) - @param hour:int The hour, minimum value is 0, maximum value is 23 - @param minute:int The minute, minimum value is 0, maximum value is 59 - @param second:int The second, minimum value is 0, probable maximum value is 60 (**) - @param weekday:int The weekday, 1 = Monday, 7 = Sunday - @param fade:float? Blueshift can use this function to fade into a state when it start - or exits. `fade` can either be negative, zero or positive or `None`, - but the magnitude of value cannot exceed 1. When Blueshift starts, - this function will be invoked multiple with the time parameters - of the time it is invoked and each time `fade` will increase towards - 1, starting at 0, when the value is 1, the settings should be applied - to 100 %. After this this function will be invoked once again with - `fade` being `None`. When Blueshift exits the same behaviour is used - except, `fade` decrease towards -1 but start slightly below 0, when - -1 is reached all settings should be normal. Then Blueshift will NOT - invoke this function with `fade` being `None`, instead it will by - itself revert all settings and quit. + @param year:int The year + @param month:int The month, 1 = January, 12 = December + @param day:int The day, minimum value is 1, probable maximum value is 31 (*) + @param hour:int The hour, minimum value is 0, maximum value is 23 + @param minute:int The minute, minimum value is 0, maximum value is 59 + @param second:int The second, minimum value is 0, probable maximum value is 60 (**) + @param weekday:int The weekday, 1 = Monday, 7 = Sunday + @param fade:float? Blueshift can use this function to fade into a state when it start + or exits. `fade` can either be negative, zero or positive or `None`, + but the magnitude of value cannot exceed 1. When Blueshift starts, + this function will be invoked multiple with the time parameters + of the time it is invoked and each time `fade` will increase towards + 1, starting at 0, when the value is 1, the settings should be applied + to 100 %. After this this function will be invoked once again with + `fade` being `None`. When Blueshift exits the same behaviour is used + except, `fade` decrease towards -1 but start slightly below 0, when + -1 is reached all settings should be normal. Then Blueshift will NOT + invoke this function with `fade` being `None`, instead it will by + itself revert all settings and quit. (*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30 (**) See https://en.wikipedia.org/wiki/Leap_second diff --git a/examples/xmonad b/examples/xmonad index 3a4cd23..8256e23 100644 --- a/examples/xmonad +++ b/examples/xmonad @@ -132,8 +132,6 @@ def get_workspaces(): last = (-1, '') def periodically(year, month, day, hour, minute, second, weekday, fade): ''' - :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function - Invoked periodically If you want to control at what to invoke this function next time @@ -141,25 +139,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade): number of seconds to wait before invoking this function again. The value does not need to be an integer. - @param year:int The year - @param month:int The month, 1 = January, 12 = December - @param day:int The day, minimum value is 1, probable maximum value is 31 (*) - @param hour:int The hour, minimum value is 0, maximum value is 23 - @param minute:int The minute, minimum value is 0, maximum value is 59 - @param second:int The second, minimum value is 0, probable maximum value is 60 (**) - @param weekday:int The weekday, 1 = Monday, 7 = Sunday - @param fade:float? Blueshift can use this function to fade into a state when it start - or exits. `fade` can either be negative, zero or positive or `None`, - but the magnitude of value cannot exceed 1. When Blueshift starts, - the this function will be invoked multiple with the time parameters - of the time it is invoked and each time `fade` will increase towards - 1, starting at 0, when the value is 1, the settings should be applied - to 100 %. After this this function will be invoked once again with - `fade` being `None`. When Blueshift exits the same behaviour is used - except, `fade` decrease towards -1 but start slightly below 0, when - -1 is reached all settings should be normal. Then Blueshift will NOT - invoke this function with `fade` being `None`, instead it will by - itself revert all settings and quit. + @param year:int The year + @param month:int The month, 1 = January, 12 = December + @param day:int The day, minimum value is 1, probable maximum value is 31 (*) + @param hour:int The hour, minimum value is 0, maximum value is 23 + @param minute:int The minute, minimum value is 0, maximum value is 59 + @param second:int The second, minimum value is 0, probable maximum value is 60 (**) + @param weekday:int The weekday, 1 = Monday, 7 = Sunday + @param fade:float? Blueshift can use this function to fade into a state when it start + or exits. `fade` can either be negative, zero or positive or `None`, + but the magnitude of value cannot exceed 1. When Blueshift starts, + the this function will be invoked multiple with the time parameters + of the time it is invoked and each time `fade` will increase towards + 1, starting at 0, when the value is 1, the settings should be applied + to 100 %. After this this function will be invoked once again with + `fade` being `None`. When Blueshift exits the same behaviour is used + except, `fade` decrease towards -1 but start slightly below 0, when + -1 is reached all settings should be normal. Then Blueshift will NOT + invoke this function with `fade` being `None`, instead it will by + itself revert all settings and quit. (*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30 (**) See https://en.wikipedia.org/wiki/Leap_second diff --git a/src/__main__.py b/src/__main__.py index dec8d2f..6490652 100755 --- a/src/__main__.py +++ b/src/__main__.py @@ -64,25 +64,25 @@ you can set the value of the global variable `wait_period` to the number of seconds to wait before invoking this function again. The value does not need to be an integer. -@param year:int The year -@param month:int The month, 1 = January, 12 = December -@param day:int The day, minimum value is 1, probable maximum value is 31 (*) -@param hour:int The hour, minimum value is 0, maximum value is 23 -@param minute:int The minute, minimum value is 0, maximum value is 59 -@param second:int The second, minimum value is 0, probable maximum value is 60 (**) -@param weekday:int The weekday, 1 = Monday, 7 = Sunday -@param fade:float? Blueshift can use this function to fade into a state when it start - or exits. `fade` can either be negative, zero or positive or `None`, - but the magnitude of value cannot exceed 1. When Blueshift starts, - this function will be invoked multiple with the time parameters - of the time it is invoked and each time `fade` will increase towards - 1, starting at 0, when the value is 1, the settings should be applied - to 100 %. After this this function will be invoked once again with - `fade` being `None`. When Blueshift exits the same behaviour is used - except, `fade` decrease towards -1 but start slightly below 0, when - -1 is reached all settings should be normal. Then Blueshift will NOT - invoke this function with `fade` being `None`, instead it will by - itself revert all settings and quit. +@param year:int The year +@param month:int The month, 1 = January, 12 = December +@param day:int The day, minimum value is 1, probable maximum value is 31 (*) +@param hour:int The hour, minimum value is 0, maximum value is 23 +@param minute:int The minute, minimum value is 0, maximum value is 59 +@param second:int The second, minimum value is 0, probable maximum value is 60 (**) +@param weekday:int The weekday, 1 = Monday, 7 = Sunday +@param fade:float? Blueshift can use this function to fade into a state when it start + or exits. `fade` can either be negative, zero or positive or `None`, + but the magnitude of value cannot exceed 1. When Blueshift starts, + this function will be invoked multiple with the time parameters + of the time it is invoked and each time `fade` will increase towards + 1, starting at 0, when the value is 1, the settings should be applied + to 100 %. After this this function will be invoked once again with + `fade` being `None`. When Blueshift exits the same behaviour is used + except, `fade` decrease towards -1 but start slightly below 0, when + -1 is reached all settings should be normal. Then Blueshift will NOT + invoke this function with `fade` being `None`, instead it will by + itself revert all settings and quit. (*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30 (**) See https://en.wikipedia.org/wiki/Leap_second -- cgit v1.2.3-70-g09d2