diff options
Diffstat (limited to '')
| -rw-r--r-- | examples/lisp-esque | 1 | ||||
| -rw-r--r-- | examples/lisp-esque.conf | 312 |
2 files changed, 313 insertions, 0 deletions
diff --git a/examples/lisp-esque b/examples/lisp-esque index fde2d0c..14042aa 100644 --- a/examples/lisp-esque +++ b/examples/lisp-esque @@ -12,6 +12,7 @@ # Get the name of .conf file conf = '%s.conf' % (config_file[:-2] if config_file.endswith('rc') else config_file) +# TODO it should be possible to change file # Read .conf file diff --git a/examples/lisp-esque.conf b/examples/lisp-esque.conf new file mode 100644 index 0000000..130068d --- /dev/null +++ b/examples/lisp-esque.conf @@ -0,0 +1,312 @@ +; -*- lisp -*- +; The line above sets the editors to lisp mode, which probably +; is the mode with best syntax highlighting for this file. +; This configuration file requires the lisp-esque example +; configuration scripts + +; Both ; (semicolon) and # (pound) start commands ending the end of the line + + +(blueshift + ; Index of monitors to use. + (monitors) ; For all monitors + ; For the primary monitor: (monitors 0) + ; For the first two monitors: (monitors 0 1) + ; For the primary on the screen 0 and screen 1: (monitors 0:0 1:0) + ; For all monitors on screen 0: (monitors 0:) + ; For monitors with output name DVI-0: (monitors :crtc "DVI-0") + ; For monitors with output name DVI-0 or VGA-0: (monitors :crtc ("DVI-0" "VGA-0")) + ; For monitors with size 364 mm × 291 mm: (monitors :size (364 291)) + + + ; Geographical coodinates: latitude longitude (northwards and eastwards in degrees) + (coordinates 59.3472 18.0728) + ; If you have this store in ~/.location you can use + ; (coordinates :parse (read "~/.location")) + ; If the command `~/.location` prints the information you can use + ; (coordinates :parse (spawn "~/.location")) + ; Or if you want to the location to be updates continuously: + ; (coordinates:cont :parse (spawn "~/.location")) + ; You can also store the text "(coordinates 59.3472 18.0728)" in + ; file named ~/.location: + ; :include "~/.location" + ; A more advance alternative is to have a Python file named "~/.location.py" + ; that is parsed and have its function `location` invoked with not arguments: + ; (source "~/.location.py") + ; (coordinates :eval "location()") + ; If location can continuously update your location you can use: + ; (source "~/.location.py") + ; (coordinates:cont :eval location) + ; You can combine having a static location and continuously updating, + ; which allows Blueshift to use the static location if the dynamic cannot + ; be fetch when Blueshift starts: + ; (coordinates 59.3472 18.0728) + ; (coordinates:cont :parse (spawn "~/.location")) + + ; Time points when different settings are applied, continuous transition + ; betweem them will be used. This are not used by default, be can be + ; enabled in the next section. + (timepoints 2:00 8:00 22:00) + + ; Select method for calculating the time the different settings are (fully) applied + (points solar) + ; Use the two default solar elevations + ; (points solar :eval SOLAR_ELEVATION_ASTRONOMICAL_DUSK_DAWN :eval SOLAR_ELEVATION_SUNSET_SUNRISE) + ; Use two standard solar elevations + ; (points solar -18 -12 -6 0 6) + ; Use four custom solar elevations + ; (points time) + ; Use the time points from (timepoints) (from the previous section) + ; (points constant) + ; Assume it 100 % are day long, and exit when settings have been applied. + ; (One shot mode instead of continuous mode) + + ; If you have multiple values in (points) they can be reduced to two: + ; (dayness 0 1 1) + ; For example, if we have (points time) and (timepoints 2:00 8:00 22:00) + ; than (dayness 0 1 1) will reduce it so that the settings only have to + ; define values for day and night (in that order). At 2:00 it would be + ; 100 % night, and at 8:00 to 22:00 it would be 100 % day. + + + ; Colour curve applying method. + (method randr) ### --- MODERATE LEVEL --- + ; Alternatively (limited to primary monitors): (method vidmode) + ; For debugging (or passing to another application) you can use + ; (method print) + ; It is possible to use both: + ; (method print randr) + + + (transfrom randr) ; yes, this it says ‘from’ not ‘form’ + ; This lets Blueshift transition from the currently applied settings + ; when it starts. If you prefer to use vidmode instead of randr you + ; can use + ; (transfrom randr) + ; If you do not want to do this you can use + ; (transfrom nil) + ; It an also be configured individually for the monitors: + ; (transfrom randr nil) + ; This will not do this for the second monitor + + + ;; Important: The following options are applied in order of appearance + ;; moving them around can cause inexact monitors calibration + ;; or other unwanted effects. But it could perhaps also do + ;; something wonderful. + + ; ICC profile for video filtering (monitor calibration will be later.) + ; Replace `nil` with the pathname of the profile. It is assumed to not be + ; already applied and it is assumed that it should not be applied on exit. + #(icc:filter nil) ### --- MODERATE LEVEL --- + ; If you have three monitors: (icc:filter (nil nil nil)) + ; On all the monitors but time dependent: (icc:filter nil nil) + ; The two above combined: (icc:filter (nil nil nil) (nil nil nil)) + + ; Negative image settings. + (negative no) ; Does nothing + ; (negative yes) ; Inverts the colours on the encoding axes + ; (negative (yes no no)) ; Inverts the red colour on the encoding axis + ; (negative yes no) ; Inverts the colours on the encoding axes on the first monitor + ; ; but not the second monitor selected by (monitors) + ; (invert yes) ; Inverts the colours on the output axes using the sRGB colour space + ; (invert (yes no no)) ; Inverts the red colour on the output axes using the sRGB colour space + ; (invert:cie yes) ; Inverts the colours on the output axes using the CIE xyY colour space + ; These cannot be time dependent. + + ; Colour temperature at high day and high night, respectively. + (temperature 6500 3700) + ; If you the second monitor selected by (monitors) to always be at 6500K you can use + ; (temperature (6500 6500) (3700 6500)) + + ### --- EXPERT LEVEL --- + ; If you want a more advance calculation of the correlated colour + ; temperature you can replace (temperature) in the step about with + ; (temperature') and add the following *before* it: + ; (compose temperature' as-is (divide_by_maximum cmf_10deg)) + ; This is the default, but you can also use for example and of the following: + ; (compose temperature' as-is (divide_by_maximum series_d)) + ; (compose temperature' as-is (clip_whitepoint simple_whitepoint)) + ; (compose temperature' as-is (divide_by_maximum cmf_2deg)) + ; (compose temperature' as-is redshift') + ; Where Redshift' needs to be composed by temperature': + ; (compose redshift' as-is yes) ; as in redshift<=1.8 + ; (compose redshift' as-is no) ; as in redshift>1.8 + ; (compose redshift' as-is yes yes) ; as in redshift<=1.8 but interpolating in linear RGB + ; (compose redshift' as-is no yes) ; as in redshift>1.8 but interpolating in linear RGB + ; See `info blueshift 'configuration api' 'colour curve manipulators'` + ; and look for ‘temperature’ for details. + + ; It is possible to calibrations that were applied when Blueshift started. + #(current nil) ### --- EXPERT LEVEL --- + ; This is ignored if --panicgate is used (it is assumed that Blueshift + ; crashed if --panicgate is used). It also has no effect in one shot mode. + ; `nil` means that it does nothing, but you can also use `randr` or + ; `vidmode`, but `vidmode` is restricted to primary monitors: + ; (current randr) ; of using randr + ; (current vidmode) ; of using vidmode + ; You can also controll the monitors individually: + ; (current randr nil) ; does this only for the first monitor + + ; Colour brightness at high day and high night, respectively. + ; This setting uses the CIE xyY colour space for calculating values. + (brightness:cie 1 1) + ; If you have multiple monitors, they can be configured indiviudally. + ; For example if you have two monitors, we can keep the first monitor + ; on full brightness all day long, but make the second monitor be + ; at 75 % during the night: + ; (brightness:cie (1 1) (1 0.75)) + + ; Colour brightness of the red, green and blue components, + ; respectively, at high day and high night, respectively. + ; This settings uses the sRGB colour space for calculating values. + (brightness (1 1 1) (1 1 1)) ### --- MODERATE LEVEL --- + ; Because red, green and blue are identical in this example, + ; writting (brightness 1 1) instead with do the same thing. + ; If you want the second monitor selected by (monitors) to always + ; be at 100 % but the primary to shift between 100 % and 75 % you can use + ; (brightness ((1) (1)) ((1) (0.75))) + ; As this indicates you use the following if you want only the blue + ; part to shift to 75 %: + ; (brightness ((1) (1)) ((1) (0.75 1 1))) + ; Or alternatively: + ; (brightness:red (1 1) (1 0.75)) + + ; Colour contrast at high day and high night, respectively. + ; This setting uses the CIE xyY colour space for calculating values. + #(contrast:cie 1 1) ### --- MODERATE LEVEL --- + ; This can be done monitors dependently as in (brightness:cie). + + ; Colour contrast of the red, green and blue components, + ; respectively, at high day and high night, respectively. + ; This settings uses the sRGB colour space for calculating values. + #(contrast (1 1 1) (1 1 1)) ### --- MODERATE LEVEL --- + ; Because red, green and blue are identical in this example, + ; writting (contrast 1 1) instead with do the same thing. + ; This can be done monitors dependently as in (brightness). + + + ;; Note: brightness and contrast is not intended for colour + ;; calibration, it should be calibrated on the monitors' + ;; control panels. + + + ; These are fun curve manipulator settings that lowers the + ; colour resolution ont encoding and output axes respectively. + ; In this example (resolution:encoding) only has one argument, + ; it applies all day long on each colour curve. + #(resolution:encoding :eval i_size) ### -- ADVANCED LEVEL -- + ; This evaluated into: + ; (resolution:encoding 256) + ; (resolution:output) in this example one argument that is + ; a tuple of three values which represent red, green, and + ; blue respectively. Because it is only one argument it + ; applies all day long as well. + #(resolution:output (:eval (o_size o_size o_size))) ### -- ADVANCED LEVEL -- + ; This evaluated into: + ; (resolution:output (65535 65535 65535)) + ; As always you can control the monitors individually: + ; (resolution:output (:eval ((o_size o_size o_size) (o_size o_size o_size)))) + ; This evaluated into: + ; (resolution:output ((65535 65535 65535) (65535 65535 65535))) + + ; Gamma correction for the red, green and blue components, respectively, + ; at high day, high night and monitor default, respectively. + ; This settings uses the sRGB colour space for calculating values. + #(gamma (1 1 1) (1 1 1)) ### --- MODERATE LEVEL --- + (gamma:default (1 1 1)) + ; All configurations can use :default, but it only makes since + ; for gamma because it is the only actual monitors calibration + ; configurations, with the exception of ICC profiles and white + ; point and black point calibration and sigmoid curve correction. + ; (gamma) automatically run (clip) to avoid mathematical errors, + ; If you prefer not to run (clip) you can use + ; ('gamma (1 1 1) (1 1 1)) + ; ('gamma:default (1 1 1)) + ; You can also run clip manually: + ; (clip) + ; Or for the first but not second monitor: + ; (clip yes no) + ; Clipping cannot time dependent. + + + ;; Note: gamma is supposted to be static, it purpose is to + ;; correct the colours on the monitors the monitor's gamma + ;; is exactly 2,2 and the colours look correct in relation + ;; too each other. It is supported to have different settings + ;; at day and night because there are no technical limitings + ;; and it can presumable increase readability on text when + ;; the colour temperature is low. + + + ; If you have an LCD monitor you can use (well you could on CRT as + ; well but it would not make since) sigmoid curve correction to + ; calibrate your monitor. 4.5 is a good value to start testing at, + ; but be aware, it is very difficult to get right is it depens on + ; other calibrations as well. For now we have `nil` which means that + ; no sigmoid curve correction will take place. + #(sigmoid:default (nil nil nil)) ### -- EXPERT LEVEL -- + ; This three `nil`:s are for red, green and blue respectively, + ; but you can just one argument instead of a tuple of three, if + ; the colour curves should have the same sigmoid curve correction. + ; If you have two monitors you can use (and replace nil with + ; your correction parameters): + ; (sigmoid:default (nil nil nil) (nil nil nil)) + ; or + ; (sigmoid:default nil nil) + ; You can also so time dependent correction: + #(sigmoid (nil nil nil) (nil nil nil)) ### -- EXPERT LEVEL -- + ; (sigmoid ((nil nil nil) (nil nil nil)) ((nil nil nil) (nil nil nil))) + ; (sigmoid (nil nil) (nil nil)) + + ; If you have require software level brightness and contract + ; calibration (needed to calibrate most LCD monitors), you and + ; use (limits) and (limits:cie). These will calibrate the + ; black point (brightness) and the white point (contrast). This + ; brightness and contrast is not the same thing as the settings + ; (brightness) and (contrast). (brightness) is more similar to + ; backlight and (contrast) is a flattening of the colour curves + ; towards 50 %. In (limits:cie) and first argument (for each time) + ; is the brightness [black point] and the second is the [white point]. + #(cie_limits:default 0 1) ### -- ADVANCED LEVEL -- + ; If you have three monitors they can be controlled individually: + ; (cie_limits:default (0 1) (0 1) (0 1)) + ; You can so also do time dependent correction: + ;(cie_limits (0 1) (0 1)) + ; (cie_limits ((0 1) (0 1) (0 1)) ((0 1) (0 1) (0 1))) + + ; ICC profile for monitor calibration will be later. + ; Replace `nil` with the pathname of the profile. It is assumed to + ; already be applied and that it should be applied on exit. + #(icc:calib nil) ### -- MODERATE LEVEL -- + ; If you have three monitors: (icc (nil nil nil)) + ; On all the monitors but time dependent: (icc nil nil) + ; The two above combined: (icc (nil nil nil) (nil nil nil)) + ; (icc) is a synonym for (icc:calib). + + ### -- EXPERT LEVEL -- + ; It is also possible to some of your own manipulations: + ; where is an example that temporary switches to linear RGB + ; change makes the colour curves logarithmical: + ; (linearise) + ; (manipulate 'lambda x : math.log(x + 1, 2)') + ; Or for the colour colurves individually: + ; (manipulate 'lambda x : math.log(x + 1, 2)' + ; 'lambda x : math.log(x + 1, 2)' + ; 'lambda x : math.log(x + 1, 2)' + ; ) + ; (standardise) + ; As with (clip) (linearise) and (standardise) can depend + ; on the monitor, so can (manipulate): + ; (linearise yes no) + ; (manipulate 'lambda x : math.log(x + 1, 2)') + ; Or for the colour colurves individually: + ; (manipulate ('lambda x : math.log(x + 1, 2)' + ; 'lambda x : math.log(x + 1, 2)' + ; 'lambda x : math.log(x + 1, 2)' + ; ) + ; nil ; Do nothing on the second monitor + ; ) + ; (standardise yes no) +) + |