summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--examples/backlight40
-rw-r--r--examples/battery40
-rw-r--r--examples/bedtime40
-rw-r--r--examples/comprehensive40
-rw-r--r--examples/sleepmode40
-rw-r--r--examples/textconf40
-rw-r--r--examples/threaded40
-rw-r--r--examples/xmonad40
-rwxr-xr-xsrc/__main__.py38
9 files changed, 171 insertions, 187 deletions
diff --git a/examples/backlight b/examples/backlight
index 525948b..9c8ff52 100644
--- a/examples/backlight
+++ b/examples/backlight
@@ -60,8 +60,6 @@ wait_period = 0.1
cycle, adj, last = 0, 1, controller.brightness
def periodically(year, month, day, hour, minute, second, weekday, fade):
'''
- :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function
-
Invoked periodically
If you want to control at what to invoke this function next time
@@ -69,25 +67,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade):
number of seconds to wait before invoking this function again.
The value does not need to be an integer.
- @param year:int The year
- @param month:int The month, 1 = January, 12 = December
- @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
- @param hour:int The hour, minimum value is 0, maximum value is 23
- @param minute:int The minute, minimum value is 0, maximum value is 59
- @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
- @param weekday:int The weekday, 1 = Monday, 7 = Sunday
- @param fade:float? Blueshift can use this function to fade into a state when it start
- or exits. `fade` can either be negative, zero or positive or `None`,
- but the magnitude of value cannot exceed 1. When Blueshift starts,
- this function will be invoked multiple with the time parameters
- of the time it is invoked and each time `fade` will increase towards
- 1, starting at 0, when the value is 1, the settings should be applied
- to 100 %. After this this function will be invoked once again with
- `fade` being `None`. When Blueshift exits the same behaviour is used
- except, `fade` decrease towards -1 but start slightly below 0, when
- -1 is reached all settings should be normal. Then Blueshift will NOT
- invoke this function with `fade` being `None`, instead it will by
- itself revert all settings and quit.
+ @param year:int The year
+ @param month:int The month, 1 = January, 12 = December
+ @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
+ @param hour:int The hour, minimum value is 0, maximum value is 23
+ @param minute:int The minute, minimum value is 0, maximum value is 59
+ @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
+ @param weekday:int The weekday, 1 = Monday, 7 = Sunday
+ @param fade:float? Blueshift can use this function to fade into a state when it start
+ or exits. `fade` can either be negative, zero or positive or `None`,
+ but the magnitude of value cannot exceed 1. When Blueshift starts,
+ this function will be invoked multiple with the time parameters
+ of the time it is invoked and each time `fade` will increase towards
+ 1, starting at 0, when the value is 1, the settings should be applied
+ to 100 %. After this this function will be invoked once again with
+ `fade` being `None`. When Blueshift exits the same behaviour is used
+ except, `fade` decrease towards -1 but start slightly below 0, when
+ -1 is reached all settings should be normal. Then Blueshift will NOT
+ invoke this function with `fade` being `None`, instead it will by
+ itself revert all settings and quit.
(*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30
(**) See https://en.wikipedia.org/wiki/Leap_second
diff --git a/examples/battery b/examples/battery
index 4f333f4..118f64c 100644
--- a/examples/battery
+++ b/examples/battery
@@ -65,8 +65,6 @@ fadein_time = None
def periodically(year, month, day, hour, minute, second, weekday, fade):
'''
- :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function
-
Invoked periodically
If you want to control at what to invoke this function next time
@@ -74,25 +72,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade):
number of seconds to wait before invoking this function again.
The value does not need to be an integer.
- @param year:int The year
- @param month:int The month, 1 = January, 12 = December
- @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
- @param hour:int The hour, minimum value is 0, maximum value is 23
- @param minute:int The minute, minimum value is 0, maximum value is 59
- @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
- @param weekday:int The weekday, 1 = Monday, 7 = Sunday
- @param fade:float? Blueshift can use this function to fade into a state when it start
- or exits. `fade` can either be negative, zero or positive or `None`,
- but the magnitude of value cannot exceed 1. When Blueshift starts,
- this function will be invoked multiple with the time parameters
- of the time it is invoked and each time `fade` will increase towards
- 1, starting at 0, when the value is 1, the settings should be applied
- to 100 %. After this this function will be invoked once again with
- `fade` being `None`. When Blueshift exits the same behaviour is used
- except, `fade` decrease towards -1 but start slightly below 0, when
- -1 is reached all settings should be normal. Then Blueshift will NOT
- invoke this function with `fade` being `None`, instead it will by
- itself revert all settings and quit.
+ @param year:int The year
+ @param month:int The month, 1 = January, 12 = December
+ @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
+ @param hour:int The hour, minimum value is 0, maximum value is 23
+ @param minute:int The minute, minimum value is 0, maximum value is 59
+ @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
+ @param weekday:int The weekday, 1 = Monday, 7 = Sunday
+ @param fade:float? Blueshift can use this function to fade into a state when it start
+ or exits. `fade` can either be negative, zero or positive or `None`,
+ but the magnitude of value cannot exceed 1. When Blueshift starts,
+ this function will be invoked multiple with the time parameters
+ of the time it is invoked and each time `fade` will increase towards
+ 1, starting at 0, when the value is 1, the settings should be applied
+ to 100 %. After this this function will be invoked once again with
+ `fade` being `None`. When Blueshift exits the same behaviour is used
+ except, `fade` decrease towards -1 but start slightly below 0, when
+ -1 is reached all settings should be normal. Then Blueshift will NOT
+ invoke this function with `fade` being `None`, instead it will by
+ itself revert all settings and quit.
(*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30
(**) See https://en.wikipedia.org/wiki/Leap_second
diff --git a/examples/bedtime b/examples/bedtime
index eff08d2..23ebec9 100644
--- a/examples/bedtime
+++ b/examples/bedtime
@@ -202,8 +202,6 @@ def get_bedness(time):
last_dayness, last_bedness = -1, -1
def periodically(year, month, day, hour, minute, second, weekday, fade):
'''
- :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function
-
Invoked periodically
If you want to control at what to invoke this function next time
@@ -211,25 +209,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade):
number of seconds to wait before invoking this function again.
The value does not need to be an integer.
- @param year:int The year
- @param month:int The month, 1 = January, 12 = December
- @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
- @param hour:int The hour, minimum value is 0, maximum value is 23
- @param minute:int The minute, minimum value is 0, maximum value is 59
- @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
- @param weekday:int The weekday, 1 = Monday, 7 = Sunday
- @param fade:float? Blueshift can use this function to fade into a state when it start
- or exits. `fade` can either be negative, zero or positive or `None`,
- but the magnitude of value cannot exceed 1. When Blueshift starts,
- this function will be invoked multiple with the time parameters
- of the time it is invoked and each time `fade` will increase towards
- 1, starting at 0, when the value is 1, the settings should be applied
- to 100 %. After this this function will be invoked once again with
- `fade` being `None`. When Blueshift exits the same behaviour is used
- except, `fade` decrease towards -1 but start slightly below 0, when
- -1 is reached all settings should be normal. Then Blueshift will NOT
- invoke this function with `fade` being `None`, instead it will by
- itself revert all settings and quit.
+ @param year:int The year
+ @param month:int The month, 1 = January, 12 = December
+ @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
+ @param hour:int The hour, minimum value is 0, maximum value is 23
+ @param minute:int The minute, minimum value is 0, maximum value is 59
+ @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
+ @param weekday:int The weekday, 1 = Monday, 7 = Sunday
+ @param fade:float? Blueshift can use this function to fade into a state when it start
+ or exits. `fade` can either be negative, zero or positive or `None`,
+ but the magnitude of value cannot exceed 1. When Blueshift starts,
+ this function will be invoked multiple with the time parameters
+ of the time it is invoked and each time `fade` will increase towards
+ 1, starting at 0, when the value is 1, the settings should be applied
+ to 100 %. After this this function will be invoked once again with
+ `fade` being `None`. When Blueshift exits the same behaviour is used
+ except, `fade` decrease towards -1 but start slightly below 0, when
+ -1 is reached all settings should be normal. Then Blueshift will NOT
+ invoke this function with `fade` being `None`, instead it will by
+ itself revert all settings and quit.
(*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30
(**) See https://en.wikipedia.org/wiki/Leap_second
diff --git a/examples/comprehensive b/examples/comprehensive
index daaa626..b164212 100644
--- a/examples/comprehensive
+++ b/examples/comprehensive
@@ -279,8 +279,6 @@ sigmoid_ = list(zip(sigmoid_red, sigmoid_green, sigmoid_blue))
icc_video_filter_profile = [None] * len(icc_video_filter_profile_day)
def periodically(year, month, day, hour, minute, second, weekday, fade):
'''
- :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function
-
Invoked periodically
If you want to control at what to invoke this function next time
@@ -288,25 +286,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade):
number of seconds to wait before invoking this function again.
The value does not need to be an integer.
- @param year:int The year
- @param month:int The month, 1 = January, 12 = December
- @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
- @param hour:int The hour, minimum value is 0, maximum value is 23
- @param minute:int The minute, minimum value is 0, maximum value is 59
- @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
- @param weekday:int The weekday, 1 = Monday, 7 = Sunday
- @param fade:float? Blueshift can use this function to fade into a state when it start
- or exits. `fade` can either be negative, zero or positive or `None`,
- but the magnitude of value cannot exceed 1. When Blueshift starts,
- this function will be invoked multiple with the time parameters
- of the time it is invoked and each time `fade` will increase towards
- 1, starting at 0, when the value is 1, the settings should be applied
- to 100 %. After this this function will be invoked once again with
- `fade` being `None`. When Blueshift exits the same behaviour is used
- except, `fade` decrease towards -1 but start slightly below 0, when
- -1 is reached all settings should be normal. Then Blueshift will NOT
- invoke this function with `fade` being `None`, instead it will by
- itself revert all settings and quit.
+ @param year:int The year
+ @param month:int The month, 1 = January, 12 = December
+ @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
+ @param hour:int The hour, minimum value is 0, maximum value is 23
+ @param minute:int The minute, minimum value is 0, maximum value is 59
+ @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
+ @param weekday:int The weekday, 1 = Monday, 7 = Sunday
+ @param fade:float? Blueshift can use this function to fade into a state when it start
+ or exits. `fade` can either be negative, zero or positive or `None`,
+ but the magnitude of value cannot exceed 1. When Blueshift starts,
+ this function will be invoked multiple with the time parameters
+ of the time it is invoked and each time `fade` will increase towards
+ 1, starting at 0, when the value is 1, the settings should be applied
+ to 100 %. After this this function will be invoked once again with
+ `fade` being `None`. When Blueshift exits the same behaviour is used
+ except, `fade` decrease towards -1 but start slightly below 0, when
+ -1 is reached all settings should be normal. Then Blueshift will NOT
+ invoke this function with `fade` being `None`, instead it will by
+ itself revert all settings and quit.
(*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30
(**) See https://en.wikipedia.org/wiki/Leap_second
diff --git a/examples/sleepmode b/examples/sleepmode
index 8713b63..d633f27 100644
--- a/examples/sleepmode
+++ b/examples/sleepmode
@@ -68,8 +68,6 @@ wait_period = 60 * 60
def periodically(year, month, day, hour, minute, second, weekday, fade):
'''
- :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function
-
Invoked periodically
If you want to control at what to invoke this function next time
@@ -77,25 +75,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade):
number of seconds to wait before invoking this function again.
The value does not need to be an integer.
- @param year:int The year
- @param month:int The month, 1 = January, 12 = December
- @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
- @param hour:int The hour, minimum value is 0, maximum value is 23
- @param minute:int The minute, minimum value is 0, maximum value is 59
- @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
- @param weekday:int The weekday, 1 = Monday, 7 = Sunday
- @param fade:float? Blueshift can use this function to fade into a state when it start
- or exits. `fade` can either be negative, zero or positive or `None`,
- but the magnitude of value cannot exceed 1. When Blueshift starts,
- this function will be invoked multiple with the time parameters
- of the time it is invoked and each time `fade` will increase towards
- 1, starting at 0, when the value is 1, the settings should be applied
- to 100 %. After this this function will be invoked once again with
- `fade` being `None`. When Blueshift exits the same behaviour is used
- except, `fade` decrease towards -1 but start slightly below 0, when
- -1 is reached all settings should be normal. Then Blueshift will NOT
- invoke this function with `fade` being `None`, instead it will by
- itself revert all settings and quit.
+ @param year:int The year
+ @param month:int The month, 1 = January, 12 = December
+ @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
+ @param hour:int The hour, minimum value is 0, maximum value is 23
+ @param minute:int The minute, minimum value is 0, maximum value is 59
+ @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
+ @param weekday:int The weekday, 1 = Monday, 7 = Sunday
+ @param fade:float? Blueshift can use this function to fade into a state when it start
+ or exits. `fade` can either be negative, zero or positive or `None`,
+ but the magnitude of value cannot exceed 1. When Blueshift starts,
+ this function will be invoked multiple with the time parameters
+ of the time it is invoked and each time `fade` will increase towards
+ 1, starting at 0, when the value is 1, the settings should be applied
+ to 100 %. After this this function will be invoked once again with
+ `fade` being `None`. When Blueshift exits the same behaviour is used
+ except, `fade` decrease towards -1 but start slightly below 0, when
+ -1 is reached all settings should be normal. Then Blueshift will NOT
+ invoke this function with `fade` being `None`, instead it will by
+ itself revert all settings and quit.
(*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30
(**) See https://en.wikipedia.org/wiki/Leap_second
diff --git a/examples/textconf b/examples/textconf
index 9f9d778..38c56a2 100644
--- a/examples/textconf
+++ b/examples/textconf
@@ -477,8 +477,6 @@ for sb in saved_backlight_:
def periodically(year, month, day, hour, minute, second, weekday, fade):
'''
- :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function
-
Invoked periodically
If you want to control at what to invoke this function next time
@@ -486,25 +484,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade):
number of seconds to wait before invoking this function again.
The value does not need to be an integer.
- @param year:int The year
- @param month:int The month, 1 = January, 12 = December
- @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
- @param hour:int The hour, minimum value is 0, maximum value is 23
- @param minute:int The minute, minimum value is 0, maximum value is 59
- @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
- @param weekday:int The weekday, 1 = Monday, 7 = Sunday
- @param fade:float? Blueshift can use this function to fade into a state when it start
- or exits. `fade` can either be negative, zero or positive or `None`,
- but the magnitude of value cannot exceed 1. When Blueshift starts,
- this function will be invoked multiple with the time parameters
- of the time it is invoked and each time `fade` will increase towards
- 1, starting at 0, when the value is 1, the settings should be applied
- to 100 %. After this this function will be invoked once again with
- `fade` being `None`. When Blueshift exits the same behaviour is used
- except, `fade` decrease towards -1 but start slightly below 0, when
- -1 is reached all settings should be normal. Then Blueshift will NOT
- invoke this function with `fade` being `None`, instead it will by
- itself revert all settings and quit.
+ @param year:int The year
+ @param month:int The month, 1 = January, 12 = December
+ @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
+ @param hour:int The hour, minimum value is 0, maximum value is 23
+ @param minute:int The minute, minimum value is 0, maximum value is 59
+ @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
+ @param weekday:int The weekday, 1 = Monday, 7 = Sunday
+ @param fade:float? Blueshift can use this function to fade into a state when it start
+ or exits. `fade` can either be negative, zero or positive or `None`,
+ but the magnitude of value cannot exceed 1. When Blueshift starts,
+ this function will be invoked multiple with the time parameters
+ of the time it is invoked and each time `fade` will increase towards
+ 1, starting at 0, when the value is 1, the settings should be applied
+ to 100 %. After this this function will be invoked once again with
+ `fade` being `None`. When Blueshift exits the same behaviour is used
+ except, `fade` decrease towards -1 but start slightly below 0, when
+ -1 is reached all settings should be normal. Then Blueshift will NOT
+ invoke this function with `fade` being `None`, instead it will by
+ itself revert all settings and quit.
(*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30
(**) See https://en.wikipedia.org/wiki/Leap_second
diff --git a/examples/threaded b/examples/threaded
index a7ea730..1fb1c65 100644
--- a/examples/threaded
+++ b/examples/threaded
@@ -153,8 +153,6 @@ for m in range(len(gamma_red)):
last_dayness = None
def periodically(year, month, day, hour, minute, second, weekday, fade):
'''
- :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function
-
Invoked periodically
If you want to control at what to invoke this function next time
@@ -162,25 +160,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade):
number of seconds to wait before invoking this function again.
The value does not need to be an integer.
- @param year:int The year
- @param month:int The month, 1 = January, 12 = December
- @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
- @param hour:int The hour, minimum value is 0, maximum value is 23
- @param minute:int The minute, minimum value is 0, maximum value is 59
- @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
- @param weekday:int The weekday, 1 = Monday, 7 = Sunday
- @param fade:float? Blueshift can use this function to fade into a state when it start
- or exits. `fade` can either be negative, zero or positive or `None`,
- but the magnitude of value cannot exceed 1. When Blueshift starts,
- this function will be invoked multiple with the time parameters
- of the time it is invoked and each time `fade` will increase towards
- 1, starting at 0, when the value is 1, the settings should be applied
- to 100 %. After this this function will be invoked once again with
- `fade` being `None`. When Blueshift exits the same behaviour is used
- except, `fade` decrease towards -1 but start slightly below 0, when
- -1 is reached all settings should be normal. Then Blueshift will NOT
- invoke this function with `fade` being `None`, instead it will by
- itself revert all settings and quit.
+ @param year:int The year
+ @param month:int The month, 1 = January, 12 = December
+ @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
+ @param hour:int The hour, minimum value is 0, maximum value is 23
+ @param minute:int The minute, minimum value is 0, maximum value is 59
+ @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
+ @param weekday:int The weekday, 1 = Monday, 7 = Sunday
+ @param fade:float? Blueshift can use this function to fade into a state when it start
+ or exits. `fade` can either be negative, zero or positive or `None`,
+ but the magnitude of value cannot exceed 1. When Blueshift starts,
+ this function will be invoked multiple with the time parameters
+ of the time it is invoked and each time `fade` will increase towards
+ 1, starting at 0, when the value is 1, the settings should be applied
+ to 100 %. After this this function will be invoked once again with
+ `fade` being `None`. When Blueshift exits the same behaviour is used
+ except, `fade` decrease towards -1 but start slightly below 0, when
+ -1 is reached all settings should be normal. Then Blueshift will NOT
+ invoke this function with `fade` being `None`, instead it will by
+ itself revert all settings and quit.
(*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30
(**) See https://en.wikipedia.org/wiki/Leap_second
diff --git a/examples/xmonad b/examples/xmonad
index 3a4cd23..8256e23 100644
--- a/examples/xmonad
+++ b/examples/xmonad
@@ -132,8 +132,6 @@ def get_workspaces():
last = (-1, '')
def periodically(year, month, day, hour, minute, second, weekday, fade):
'''
- :(int, int, int, int, int, int, int, float?)?→void Place holder for periodically invoked function
-
Invoked periodically
If you want to control at what to invoke this function next time
@@ -141,25 +139,25 @@ def periodically(year, month, day, hour, minute, second, weekday, fade):
number of seconds to wait before invoking this function again.
The value does not need to be an integer.
- @param year:int The year
- @param month:int The month, 1 = January, 12 = December
- @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
- @param hour:int The hour, minimum value is 0, maximum value is 23
- @param minute:int The minute, minimum value is 0, maximum value is 59
- @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
- @param weekday:int The weekday, 1 = Monday, 7 = Sunday
- @param fade:float? Blueshift can use this function to fade into a state when it start
- or exits. `fade` can either be negative, zero or positive or `None`,
- but the magnitude of value cannot exceed 1. When Blueshift starts,
- the this function will be invoked multiple with the time parameters
- of the time it is invoked and each time `fade` will increase towards
- 1, starting at 0, when the value is 1, the settings should be applied
- to 100 %. After this this function will be invoked once again with
- `fade` being `None`. When Blueshift exits the same behaviour is used
- except, `fade` decrease towards -1 but start slightly below 0, when
- -1 is reached all settings should be normal. Then Blueshift will NOT
- invoke this function with `fade` being `None`, instead it will by
- itself revert all settings and quit.
+ @param year:int The year
+ @param month:int The month, 1 = January, 12 = December
+ @param day:int The day, minimum value is 1, probable maximum value is 31 (*)
+ @param hour:int The hour, minimum value is 0, maximum value is 23
+ @param minute:int The minute, minimum value is 0, maximum value is 59
+ @param second:int The second, minimum value is 0, probable maximum value is 60 (**)
+ @param weekday:int The weekday, 1 = Monday, 7 = Sunday
+ @param fade:float? Blueshift can use this function to fade into a state when it start
+ or exits. `fade` can either be negative, zero or positive or `None`,
+ but the magnitude of value cannot exceed 1. When Blueshift starts,
+ the this function will be invoked multiple with the time parameters
+ of the time it is invoked and each time `fade` will increase towards
+ 1, starting at 0, when the value is 1, the settings should be applied
+ to 100 %. After this this function will be invoked once again with
+ `fade` being `None`. When Blueshift exits the same behaviour is used
+ except, `fade` decrease towards -1 but start slightly below 0, when
+ -1 is reached all settings should be normal. Then Blueshift will NOT
+ invoke this function with `fade` being `None`, instead it will by
+ itself revert all settings and quit.
(*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30
(**) See https://en.wikipedia.org/wiki/Leap_second
diff --git a/src/__main__.py b/src/__main__.py
index dec8d2f..6490652 100755
--- a/src/__main__.py
+++ b/src/__main__.py
@@ -64,25 +64,25 @@ you can set the value of the global variable `wait_period` to the
number of seconds to wait before invoking this function again.
The value does not need to be an integer.
-@param year:int The year
-@param month:int The month, 1 = January, 12 = December
-@param day:int The day, minimum value is 1, probable maximum value is 31 (*)
-@param hour:int The hour, minimum value is 0, maximum value is 23
-@param minute:int The minute, minimum value is 0, maximum value is 59
-@param second:int The second, minimum value is 0, probable maximum value is 60 (**)
-@param weekday:int The weekday, 1 = Monday, 7 = Sunday
-@param fade:float? Blueshift can use this function to fade into a state when it start
- or exits. `fade` can either be negative, zero or positive or `None`,
- but the magnitude of value cannot exceed 1. When Blueshift starts,
- this function will be invoked multiple with the time parameters
- of the time it is invoked and each time `fade` will increase towards
- 1, starting at 0, when the value is 1, the settings should be applied
- to 100 %. After this this function will be invoked once again with
- `fade` being `None`. When Blueshift exits the same behaviour is used
- except, `fade` decrease towards -1 but start slightly below 0, when
- -1 is reached all settings should be normal. Then Blueshift will NOT
- invoke this function with `fade` being `None`, instead it will by
- itself revert all settings and quit.
+@param year:int The year
+@param month:int The month, 1 = January, 12 = December
+@param day:int The day, minimum value is 1, probable maximum value is 31 (*)
+@param hour:int The hour, minimum value is 0, maximum value is 23
+@param minute:int The minute, minimum value is 0, maximum value is 59
+@param second:int The second, minimum value is 0, probable maximum value is 60 (**)
+@param weekday:int The weekday, 1 = Monday, 7 = Sunday
+@param fade:float? Blueshift can use this function to fade into a state when it start
+ or exits. `fade` can either be negative, zero or positive or `None`,
+ but the magnitude of value cannot exceed 1. When Blueshift starts,
+ this function will be invoked multiple with the time parameters
+ of the time it is invoked and each time `fade` will increase towards
+ 1, starting at 0, when the value is 1, the settings should be applied
+ to 100 %. After this this function will be invoked once again with
+ `fade` being `None`. When Blueshift exits the same behaviour is used
+ except, `fade` decrease towards -1 but start slightly below 0, when
+ -1 is reached all settings should be normal. Then Blueshift will NOT
+ invoke this function with `fade` being `None`, instead it will by
+ itself revert all settings and quit.
(*) Can be exceeded if the calendar system is changed, like in 1712-(02)Feb-30
(**) See https://en.wikipedia.org/wiki/Leap_second